Search results

Ok so I finally get the FIC working in my car ! First of all our car have Mag style crank / cam sensor, not hall effect. Second, I stopped intercepting the MAF, and now everything is working just fine. Just a little issue is the car is "bucking" at 5000 rpm, but i will figure it out later :P

clutch slipping... change it asap

I guess he needs help on how set it, not how to install it...

still available?

Did you try with the mag crank and cam sensor? I guess i'll try to only tap the wire, check if the car run well without intercepting the signal.

OK guys, I really need help. I installed the F/IC, but the car start, then die after 5 seconds. It shoot me a crank sensor code. I check everything and it look fine. I called AEM and the got no idea of the issue. So i need your help. Is the cam and crank sensor are hall effect or magnetic...

Allright, thanks for the info :)

anyone know?

Hi guys, i plug my F/IC and i'm looking for some kind of base to start tuning. So i look at the map for the SS, but i dont understand how it is working. The aem unit is working this way : 0 = the unit shoot the same amout of gas 10 = the unit shoot 10% more gas -10 = the unit shoot 10% less...

yes i know somebody in quebec who run it. sounds very great !!

Hi guys, i can't get the speedo working. I have a 2001 MazdaProtege with the 2003 MazdaSpeed Protege Engine and tranny. I machine a gear on the LSD, put the speedodrive sensor on it, plug the wire, but the speedo doesn't work. We test the speedo drive sensor on another protege and it work fine...

allright thx for the hint :)

yeah but from what i've heard, if i machine the lsd and put a speedo-drive on it, it works.

Hi guys, i can't get the speedo working. I have a 2001 MazdaProtege with the 2003 MazdaSpeed Protege Engine and tranny. I machine a gear on the LSD, put the speedodrive sensor on it, plug the wire, but the speedo doesn't work. We test the speedo drive sensor on another protege and it work fine...

A wideband and an AFC

thx a lot, great idea ! And yes its a lsd from a mazdaspeed, i swap the engine and the transmission.

hi guys, i swapped a mazdaspeed engine in a mp3 protege. but i lost the speedometer, because the mp3 doesn't have the ABS. So i want to machine the LSD to install a gear on it, but i don't know what to say to my machinist... anybody did it before? I will apreciate any info or picture of how i...

Wow thx a lot, very helpful

The synapse is crazy !

Will I be the first one to use this AFC on a MSP on this forum?