Search results

Agreed, do the clutch while you've got everything apart.

I don't have any experience (but I do have the shop manual, and it looks like you have to take the tranny apart to get at the fly wheel. Looks fairly complicated, 3 pages plus 3 removal notes. They say you have to use the SST to remove the flywheel and install the clutch and flywheel. I would...

When I was at the auto show this weekend, I picked up a few business cards from local shops. Here's what I got: Shaded Image - Buffalo, MN 612-281-6113 Dick & Rick's Auto Interiors - Bloomingotn, MN 952-884-7702 Smooth Customs - Big Lake, MN 763-263-5121 Three Performance - Loretto, MN...

I wrote these guys a few months ago asking about the system and never got a responce. I was interested in knowing what kind of hp gains we could see on an NA using the Air Intake cooler and fuel cooler. Anybody got any ideas?

In case you don't know, we're meeting at Jake's Bar and Grill on County Rd. D just west of 35W at 5pm this Sat. for dinner and then were going to the auto show at the MPLS convention center. If you'd like to skip dinner, just show up around 6:30 at Jake's for the commute.

I'm not sure what happened, but this will be our new temporary home.

Anyone going to the car show on Sat? I'm going around 6:30-7. Want to meet for dinner? Here's the URL http://www.autovationsshow.com/

Guess what, same thing happen here. Well sort of. I bouhg both cams from a nother memeber, and I want to make sure he got the right cam in the right box. The part numbers on the box are ntake: FSH9-12-420 Exhaust: FS9p-12-440A On the actual cam it says: FSH9 IN on both On one it has a pink...

Once again, the time has come, please visit the Twin Cities Protege club section at protegeclub.com for details regarding the meet. Hope to up our numbers from last month, which was very cool.

I don't think they shouldn't get off if you mark the bolts like it says to in the manual, correct me if I'm wrong, but from what I remember, the guy who installed his screwed up.

Don't know if this will help or not, here's what the manual says about camber: Nut, Cam Plate and Adjusting Cam Bolt Removal Note 1. Before loosening the nut, make a mark on the cam plate and the rossmember for reference during installation. Nut, Cam Plate, and Adjusting Cam Bolt Installation...

Check out protegeclub.com and go to the upper midwest section, there is a spot for the Twin Cities club. On July 18th, we're going to have a big meet with bbq and cruse around, everyone is welcomed, head over to como area. Just a heads up.

There is several other people who are active in the other forum. We even have a twin cities section on the site along with vinal stickers for the cars. Check us out, we ussually meet once a month. Pm me if you don't know about the other site.

Has anyone seen or tried this new system from DEI? CryO2 Would this work?? What are your thoughts?? They won SEMA's 2002 award for best new product, but I can't find anywhere what the gains would be. Would they be close to NO2?? About the same price, tell me, what do you think!!

How do you hook up a sc like the area 51 one. I can see the blower is piped to the MAF and then down to the air filer, I think. But how does the pipe hook up to the manifold? And what is the other tube hooking the two pipes together other the middle of the picture. Does this sc have an...

But whats the difference between all of these brands?

Thanks for the input, I've been reading other posts and web sites for last two days. It doesn't really matter to me weather I go with a turbo or a sc, all that matters is the BOOST. I need it, well, I guess I want it, I need to eat, sleep, and s***. From the sounds of it, an sc is simpler to...

Richie, Did you get any where with the supercharger?

Well, I met with a relative this weekend who lives in AZ and works for Mesa Airlines. His other job is tunning cars. I didn't get to speak with him at length, but his recomendation is to not use a turbo and go super. In particular, he says to use procharger. I checked out their website, and of...

I'll have to check with the creator. I'm guessing he'll make them the same size as the p5, The image I posted is his rough draft. Since they haven't been made yet, I'm guessing we can have an impact on how big they are. Thanks for you suggestions.