Mazdas247 Marketplace

Up for sale is a a brand new, never installed set of wiseco pistons and rings. These pistons are standard compression and bore I had purchased them for my low mileage build only for the machine shop to find out that my recently purchased Msp had already been bored .20 over. Im wanting $400 but i am open to offers, I really dont need an extra set of pistons lying around.

I'm bought these off Ebay and have decided to keey the non switchblade type key. OEM P/N for the key is G2YA-76-2GX Remote section is not in a bag, but it is a Mazda OEM part that can be programmed to your car. I have 2 of each available. $50.00 Shipped each.

Fs:1993 Mazda Rx7 Twin tirbo I have a red twin turbo rx7 that I am looking to sell. The car is in really great shape for its year. The car is all original with no major mods except a boost controller that was installed to help with the waste gate spring. The car also has has a boost gauge, water temp gauge, fuel pressure gauge and a/f ratio gauge. Other other mods are maintenance mods like replacing hoses. The car has just under 114,000 miles on if. The car runs and spools up perfect with no issues. The only two issues with the car is that the previous owner stripped the drain plug hole on the radiator and tried to apoxy is to help seal it goes through about a cup or less every 400 miles and the paint is faded(it's a 21 year old car)...

Have some random parts up for sale. All parts are in good working condition unless otherwise stated. 1 SR20 Garrett T25 Compressor housing - $15 plus shipping 1 SR20 Garrett T25 Exhaust housing - $15 plus shipping 2 EGR Pipes - $10 shipped (each) 1 OEM oil pump (also comes with brand new seal) - $15 shipped 1 OEM J-pipe (fits msp & protege/p5) - $8 plus shipping 2 OEM coilpacks - $7 plus shipping (each) 1 T25 compressor outlet - $5 plus shipping 1 OEM MSP exhaust manifold - $20 plus shipping (has a crack that needs to be welded) 1 OEM SR20 T25 wastegate - $5 plus shipping 1 OEM MSP bypass valve - $10 plus shipping pm me for more info or if interested!

Mazda CX7 Draw-Tite Hitch. Has never been installed I have a Draw-Tite hitch that I purchased brand new for my Mazda CX7. I have never installed it and it still has all of the original unused mounting hardware. The model number is 36419. I would prefer local pick up, but would consider shipping it. I have not weighed or boxed it up so I'm not sure how much shipping would be. The best way to reach me is probably by email: itsdavidf@hotmail.com List Date: 11/22/2013 Location: Drexel Hill, Upper Darby, PA, United States For more info, click here to view the original listing: Mazda CX7 Draw-Tite Hitch. Has never been installed -------------------------------------- On Sale For: $100 (Local Pickup Only)...

new EGR valve Selling a new EGR valve that I've had sitting around for a while. At the time was purchased thinking it was a solution to an issue, didn't fix the issue; so the EGR valve sat on a shelf next to my computer. I'm asking 100 bucks but am open to offers :-) Thanks. List Date: 10/10/2013 For more info, click here to view the original listing: new EGR valve -------------------------------------- On Sale For: $100 + $100 Shipping --------------------------------------

Brand new, never used. For 2003-2008 Mazda6s (V6) - This is the upgraded version of the oil catch can with a sight tube. - COMPLETE KIT~! Comes with everything that you need to install. First with payment takes it. $179 + shipping .

Brand new, never used. For 2003-2008 Mazda6s (V6) - Kit's from cordova, comes with the otb, spacer, gasket, extended bolts. -Only thing missing are the coupler(can get for $15 will send link if you want) and tps(which you can swap over from your 3.0L TB) ***Cordova sells the kit for $398 + shipping First with payment takes it. $269 + shipping .

so i recently became the new owner of an mp3 so i beloved p5 is going to get a part out. reason for is that the rust is so bad on p5 that i can no longer lift up the car, and my floor plan looks like swiss cheese. things for sale gt spec rear strut tower bar ( $ 125 ) jdm tails ( $ 250 ) mp3 interior includes front and rear seats ( $ 40 ) mp3 ecu not flashed ( $ 150 ) rear privacy cover ( $ 25 ) rear rubber trunk mat for p5 ( $ 30 ) Update : pics are up on the stuff off the car. Rest of the car should be parted out next weekend so more pics to come. Also I might have some other stuff I might put up for sale if someone wants to make me an offer I might just sell them. They include a reactive front strut bar, 03 p5 black housing...

I have a set of custom Black Mica fenders that I want to trade for the OEM pieces. I picked these up a couple of years ago but want to go back to the OEM fenders. I am willing to trade this for $200 + your stock Black Mica fenders. I do not want other colors and will NOT ship. I am located in the North Suburbs of Chicago. The fenders are in overall good condition, although they do have a few blemishes as can be seen from the photos. I will rate them about a 7 out of 10. Let me know if you'd like any additional photos or have any questions. The car has not been washed in a while so the fenders are a bit dirty, otherwise paint is OK except the few chips/cracks that can be clearly seen in the pictures. Thanks!

Mazda 5 sunroof wind deflector This is a factory Mazda 5 sunroof wind deflector which was on a 2006 model. It wasn't used much before being removed so is in very good condition. Asking $25 plus an estimated $10 shipping charge via FedEx. List Date: 11/17/2013 For more info, click here to view the original listing: Mazda 5 sunroof wind deflector -------------------------------------- On Sale For: $25 + $10 Shipping --------------------------------------

My name is Sebastian and I know that, I'm new guy here, but maybe someone need something what I have. Of course every deal, we can make by eBay, it isn't any problem for me. :wink: I'm from Łdź, Poland, Europe and every items are in my home, or garage. 1.) Hella by MOMO - SOLD diameter: 380mm condition: I'll try my magic. If won't work, new leather will be necessary. price: 22 EUR + shipping more photo here: http://s1064.photobucket.com/albums/u369/l3mur91/Hella%20by%20MOMO/ 2.) MOMO (OEM Mazda) - SOLD diameter: 360mm condition: Little seedy. For me, good idea it's give it to replace new leather. Of course I can, make some magic with leather liquid, and the same give her few months in car more. price: 35 EUR + shipping. more...

Sold.

GTX3071 With supporting mods Reason for sale: Too much turbo for me. Will ship to lower 48 through USPS Insurance will be provided. Items can and are ready to ship together or separately. $2,500 takes everything listed. GTX3071 .63 A/R Rated for 575HP to crank 500 miles on it $1850.00 Shipped. Details: Turbo's hotside is PnP for IWG use, but is setup for EWG using a Cobb Bracket. Original IWG is unavailable. The Hotside is also coated in a 3000 degree titanium coating (outside only) The compressor is also coated (inside and out) with a special film coat that provides a PnP effect, nice silver look, and helps to increase airflow. New owner will need to purchase studs and Nuts (9 total) Kit has a brand new Oil drain line, HTS 4 ply...

Name: rob Location: Virginia beach Means of contact: pm, call/text 757 412 9951 or email at Robert.misfeldt@gmail.com Price: $50 each obo Description: I picked up a few working extras thinking I had a bad IAC come to find out it was a hole in the intake manifold. I did test each one of these out though and they all work great. Pictures:

16 INCH WINTER TIRE SETUP I sold my Mazdaspeed 3 and have my winter tire setup left over. they are 16 inch aluminum wheels with dunlop winterforce 205/60/16s. they have between 7 1/2 and 8/32nds tread. great traction on ice and snow. only looking for a local sale so within driving distance of indianapolis indiana but if the offer is right i will consider shipping them. this new market setup is goofy so i wont put a shipping price on there until i know where they are going! List Date: 10/15/2013 For more info, click here to view the original listing: 16 INCH WINTER TIRE SETUP -------------------------------------- On Sale For: $400 + $9999 Shipping --------------------------------------

2014 Mazda CX-5 OEM Wheels + OEM Toyo Tires 225/55/19 - Only 1500 miles - LIKE NEW - No Scratches 2014 Mazda CX-5 OEM Wheels + OEM Toyo Tires 225/55/19 - Only 1500 miles - LIKE NEW - No Scratches I'm selling the original 2014 CX-5 19" wheels with TOYO all-season tires. I purchased new (black) wheels and no longer need these. They have 1500 miles on them and were used for 2 months. Local pickup only in Chicagoland. They are currently garage kept in bags. I will also include the OEM lug nuts. Thanks, Nick List Date: 11/12/2013 Location: Chicago, IL, United States For more info, click here to view the original listing: 2014 Mazda CX-5 OEM Wheels + OEM Toyo Tires 225/55/19 - Only 1500 miles - LIKE NEW - No Scratches...

I have a hidden trailer hitch that fit my 2003 Mazdaspeed Protege sedan, and it also fits a regular Mazda Protege sedan 1999-2003. It is rated at 2000 lbs and has a removable flat drawbar with a 2 inch ball included. When the drawbar is removed, only about half an inch of receiver is visible below the bumper which is what makes it "hidden". All mounting hardware is included plus the fish wire which makes it very easy to get the bolts inside the frame so you can bolt on the hitch. I'm asking $125 for this very unique hitch, plus shipping. I am in Portland, OR 97267. Thanks for looking!

my car was hit and totaled after 7 years of love. decided to get a p5 so no need for all these parts anymore. these are the only things i have left. im gonna try to sell this locally, i live in orlando fl. local pick up preffered but money talks. msp oem tail lights = 75 plus shipping msp oem sideskirts = 100 plus shipping( SOLD ) ebay exhaust = 20 plus shipping (SOLD) oem protroge5 headlights = 100 plus shipping (SOLD ) msp front bumper modded to fit a 99-00 protege front end with a minor hit. i got the piece so all it needs is to be fiberglassed =100 plus shipping ( SOLD ) wing west rear lip =80 plus shipping (SOLD) trunk with mazdaspeed wing ( no emblems ) 120 plus shipping all prices are negociable and if you are local and have a...

ZF503 - Exedy Racing - Lightweight Flywheel - $175 shipping included! Also including new flywheel bolts. The car I was going to put it in got scraped so I have no need for it. Located in central Jersey. PM me.