Mazdas247 Marketplace

This listing is for factory msp seats front and rear. they have yellow stitching Swapped the factorys out with leathers from a p5. Now i no longer own an msp. aside from the plastic inserts chipping on the drivers they Were in great condition before being put into storage. had them out to send with the car and had no room for them. they look dirty, may clean up. Cleaning out the building so they must go. As the title states they're free to the first person who picks them up. No holds, no shipping. If they are not gone by trash day (Next Wednesday morning 4-16) , they will be disposed of as scrap. located in Gray ky, 40734. im not on here much, so best way to contact is call or text Adam 606-595-0416 4 failed attempts at pictures. I...

1st Gen Mazdaspeed 3 Cold air intake, and ipod adpater addon for factory radio. I just sold my Speed 3 and have these parts left over. Mazdaspeed 3. MazdaSpeed branded from mazda with air straightner. i will include the filter. its dirty and may be able to be cleaned but i would recommend a new one. you get everything in the picture. asking 125.00 shipped or best offer. Also have the Dice ipod/Iphone add-on for stock radio. Worked great with my factory 6disc radio. i left the dip switches as they were in my car so it should be ready to plug in your radio and go. it will also work with the iphone 5 if you buy the 30pin to lightning pin adapter. asking 50.00 or best offer shipped. List Date: 11/14/2013 For more info...

Need to get rid of some off these stuff that i dont have any use for anymore. Going a different route with my MSP. Everything is used and in 100% working condition. Msg me for paypal. *paypal only no out of state or any other country shipping* Everything is priced shipped price are firmed *to high msg me offer* (wink)(wink)(wink)(wink) *Not in a hurry to sell* Price Reduce.... Package price $200 shipped Greddy Profec B-spec II boost controller - $180 shipped Greddy Turbo Timer - $40 shipped Protege5 rear glass shock - $40 shipped now $25 shipped 2 Blue/Light blue Mazda patch 4inX1.5in - $10 shipped Knock off Greddy RS BOV with flange - $40 shipped now $20 shipped TurboLife uncut cold pipe - $200 will post pix of this up tomorrow...

2009 Stock Downpipe and Midpipe 2009 MS3 Stock downpipe and midpipe in good condition List Date: 4/7/2014 For more info, click here to view the original listing: 2009 Stock Downpipe and Midpipe -------------------------------------- On Sale For: $200.00 --------------------------------------

Curt Class I/II; Ball Mount; 1.25in. Receiver; 3500lbs. GTW; 350lbs. .75" Hole; 3.125" Rise Curt Class I/II; Ball Mount; 1.25in. Receiver; 3500lbs. GTW; 350lbs. .75" Hole; 3.125" Rise Curt Class I/II (1.25") ball mount. This ball mount come with the +2012 Curt Hitch kit so I assume it is sized for that car. The <'10 s bumper is a tad longer and it does not align properly. Item is brand new. Made in the USA!! Goes for 30-40 on ebay. FEATURES: Fits 1.25 in. X 1.25 in. Receiver Tubes Solid Tube CNC Forming Mechanical Decaling Robotic Welding Durable Powder Coat Finish List Date: 12/22/2013 For more info, click here to view the original listing: Curt Class I/II; Ball Mount; 1.25in. Receiver; 3500lbs. GTW; 350lbs. .75" Hole...

HKS SSQV BOV This is a genuine HKS SSQV blow off valve I just took off my mazdaspeed 3. It's set up in recirc mode and comes with the adapter for the Mazda. It's in very good shape, but has a few scratches on it. Email me at jonmrk1493@aol.com with any questions. List Date: 4/6/2014 For more info, click here to view the original listing: HKS SSQV BOV -------------------------------------- On Sale For: $199.79 --------------------------------------

I hope this is the correct place to post this. I live in the greater Houston TX area and have noticed there are no self-serve garages in the area. I live in an apartment and there are times when I wish I had someplace to make repairs myself, saving a ton of money on labor costs. I am doing research to see how many would be interested in this idea, and would you use a self-serve garage if one was in your area. Comments? Suggestions? Thanks for your help Edwin

Selling a full set of silver Racing Harts w/tires off my MSP (17x7, +55 offset) 3 tires with decent tread, 1 with poor tread (bought used, last one blew due to a nail). 215/45/17 All rims in good condition, 1 with a nick, 2 with some rash. They just got off the car and need to be cleaned. $350 FIRM, BUYER PAYS FOR SHIPPING. Local pickup (Southern California) preferred

FS: 09-13 Mazda 6 tinted tail lights Driver and passenger tail light assemblies. all 4 pieces. Looing to sell because we are trading the car in and they want the factory tail lights. will upload pics when I get home. List Date: 4/3/2014 For more info, click here to view the original listing: FS: 09-13 Mazda 6 tinted tail lights -------------------------------------- On Sale For: $225.00 --------------------------------------

FS: 2007 Mazdaspeed3 Cosmic Blue 68.5k miles Location: Boston, MA The time has come where I am looking to sell my '07 Mazdaspeed3. I am the original owner purchased in July of 2007. This is a very well taken care of MS3. Garaged at home and garaged at work. Reason for selling is I am heavily considering jumping into a WRX. Details: Year/Model: 2007 Mazdaspeed3 Color: Cosmic Blue (Best Color in my Opinion, and that is what counts right?! ha) Mileage: 68.5k (may go up slightly, I drive a 93 miata as my daily) Mods Below: Koni Sport Yellows (Installed at 45k miles) Hawk HPS Pads Front/Rear (Installed at 45k Miles) Cobb SRI (have 2 air filters) Cobb TIP Accessport v2 HKS Hi-Power CBE Replaced Front/Rear Sway Bar Endlinks and...

F.S. P5 Rear Cargo Cover, Ebay 4-1 Header, 1 Fog Light, MSP oil cooler & other stuff Wats sup M247 im getting rid of the parts i accumulated these past few months this is what i have prices are + shipping This is my first FS thread so if my prices are too high let me know 1 fog light With a story.. it had gotten half full with water and started showing some rusty staining on the mirror reflector so i thought it was bad and replaced it only to find out the po of my car was a total idiot. He had 1machine screw holding it in(original) and 1 course screw (WTF)so the fog didnt sit tight in its holder and seal which is how the water got in when i drove thru a flooded parking lot(i didnt have a choice) so i think u can use...

Mazda Protege5 Fog Light Harness I have a fog light harness that I purchased for my 2002 Protege5. I was actually sent two, so this one is brand new. The wiring connects to the fog lamps and the side lights on the bumper. List Date: 3/30/2014 For more info, click here to view the original listing: Mazda Protege5 Fog Light Harness -------------------------------------- This item is no longer available. -------------------------------------- Mobile friendly version: Mazda Protege5 Fog Light Harness Go Mobile: Download the free Panjo iOS app now!

I have a used Protg Garage intake. Used VERY briefly. THis intake does come with an air straightener. I did not have any issues with the intake. It is missing twsso clamps, but can be picked up on the cheap at any Auto parts store. $50 plus shipping. Please PM your zip for shipping quote. This should not be expensive because it will be very light. I also have a never installed gauge Pod for a 52MM gauge. I never took the time to install while I had my mazdaspeed3 $45 Shipped Lower 48 states Everything sold as is

this is my 2002 mazda protege5. I have had it since 2011 and am the second owner. This car had a motor swap, motor currently has around 80k miles on it. Also has Tokico ILK Illumina strut and spring kit. I am looking to part out or sell the hole car as a parts car. reason for parting is because of bad wiring at the charge harness and engine harness. I would consider trades for dslr camera and equipment or a clean miata shell with transmission.

For sale mpv wiper switch Sold [/URL][/IMG][/URL][/IMG] P5 Sunlight silver passenger door handle $20.00 shipped to lower 48 states [/URL][/IMG] [/URL][/IMG]

I have the Kenwood rear subwoofer deck for sale. This does not include the mounting brackets, hardware, nor the subwoofer. The stock wire has been cut. The deck is in good condition and has been out of my car for several years sitting in my game room. Please send me your best offer but realize the buyer will have to pay for shipping. If you are interested, I can get a reasonable quote. Thanks for your interest.

disassembled 2.0 & 2.3 engines for parts prices will vary , willing to ship but buyer responsible for cost . will do paypal with non-local buyers 2006 mazda 3 s 2.3 disassembled ( threw a rod in #1) - oil pan shot , block has a hole , oil pump dmaged , water pump gone . ( alt, starter, wiring harness not for sale) also pressure plate and flywheel for sale, also oem rims for sale everything else up for grabs from coil packs to crank shaft 2006 mazda 3 2.0 disassembled ( spun bearing) - alt, starter are gone - cranshaft looked good but should be checked - 1 exhaust cam cap bolt broke needs tapped out head - all lifters are gone also have automatic flywheel message me with what your looking fair , would like to sell...

1987 Mazda B2200 Pickup Truck 1987 Mazda B2200 Long bed 5 speed 143K miles, runs and drives great clean body over all. ac heat both work ! would be a great drift truck List Date: 3/27/2014 Location: Fredericksburg, VA, United States For more info, click here to view the original listing: 1987 Mazda B2200 Pickup Truck -------------------------------------- On Sale For: $2,500.00 (Local Pickup Only) --------------------------------------

Sold

I have a brand new P5 roof rack that has never been out of the box for sale. Not sure what they go for now days or if there is any interest. Looking for best offer. Shipping from Omaha, NE to the 48 states I would imagine would be 30-40 bucks Mazdaspeed Shiftboot from a Speed Protege Orange stitching in pretty good shape. Best offer.