Mazdas247 Marketplace

Bought this about a month ago from PG. Got it mounted on the car but never ran with it. Decided to go FMIC while I have it all apart. Looking to get $400 shipped (lower 48), paypal only. SOLD

struts and springs i'm looking for aftermarket, LOW and preferably linear. steering wheel can be OEM or AM. also need a lower subframe bolt, plus some bolts for the j/s pipe, i'll look under the car to see exactly which ones a little later. and i desperately need 2 bolts for the exhaust manifold (this car was f-ed up when i bought it, but it's coming together) i wouldn't mind picking up a KB shifter bushing or AWR front MM either.

I really hate to sell my babies, I know i'll end up regreting this but I have a job interview coming up soon and need the moneys to buy me a nice suit. Note: these wont work with the stock bulbs and are low beam only, because the projectors came off a mazda 3, you need an h7 bulb * These were aimed very low, I highly recomend who ever buys these to re-open them and aim them up higher to increase visibility. *I dont have any night time cut-off lines so dont ask. *I recommend running fog lights to increase visability at night, Or you can just open them up yoursellf an aim them according to your state law and liking. *there is slight blemishes on each one of the lenses I tried sanding them down and restoring them with no luck,you...

Puttin my weaponR hardpipes up for sale. Upgraded to t-bolt clamps because the ones provided with the kit sucked. The couplers could be better too, that's why I bought high quality re-inforced silicone.... never got around to putting them in though so they are brand new. The pipes have about 2000 miles on them. $200 +shipping/pp fees. For an extra $40 you can have the couplers too.

Like the title says, looking for a wastegate actuator and bracket.

just as the title says, im looking for a set of used hardpipes, my pipes are leaking like crazy. let me know guys.

Hi. everyone i just installed an fmic that i got from crxracing and i got a bov with it but it dosent work lol so i am looking for a GREDDY TYPE RS also looking for some bolt on upgrades.

im looking to buy either a stock msp turbo or a gt28rs turbo, so let me know what you have! thanks

My gauge cluster mysteriosly took a s*** on me and am looking for a msp gauge cluster to replace it.Let me know what ya got thanks jake

please reply someone

WTB: MSP catalytic converter - Found one thanks Found one now thanks for the PM's.

I'm looking through the forum and can't find any MSPs for sale. Am I looking in the wrong place?

Pick and Pull Been having some electrical problems with the car and it has to go. Post on here and we can work something out. I'll have pictures and the proper I.D. up soon

My suspension is shot and getting a little annoying plus its still the stock height. I really want coilovers but I know they re a bit pricey so I'll be willing to go the struts and springs route. Is anyone selling coilovers, shocks, or springs?

hey i'm hunting 4 a complete oil cooler kit off a standard msp??? does anyone have one???? mathew :)

Looking to buy 4 Tokico Struts for the MSP. Prefer a set that has less than 50k. PM me please!!

Like it says, I'm looking for a cold-pipe from the Turbo Life / Perrin FMIC. Mine is cut up from relocating the MAF, and I'm considering going back to a draw through set-up and BPV. I rather not use my hacked up pipe w/ tons of couplers.

626 intake manifold from su. replace ur stocker with this highflow manifold. (manifold will be bead blasted and will look like new when u recieve it, also i can port and polish and gasket match it and even paint it for additional cost. SOLD mazdaspeed protege calloway turbo manifold, no cracks. $200 and last i have a mazdaspeed protege valve cover. SOLD i know the parts are dirty but when u recieve them they will be in like new condition. im open to offers, but i think these are fairly priced considering the condition u will recieve them in.

Anyone got a Perrin Fuel Rail they want to sell?

sold