Mazdas247 Marketplace

I sold my car, so a few things are up for sale. These are for the 1st gen MS3. All in good working condition removed last week. Shipping included to the lower 48. Payment by Paypal only. CPE rear motor mount - $65 shipped SOLD to celticfc No idea on the duro, I bought it in late 2008/early 2009. http://www.cp-e.com/products/mazda3/mazda3-mazdaspeed3-stage1-wishbone-engine-mount Scan Gauge II w/ vent pod - $110 shipped SOLD to SpicyorangeMSP http://www.aeroforcetech.com/products_order_mazda.html http://www.therpmstore.com/store/p/552-VentPod-Single-Gauge-Pod-for-Mazda-3-Mazdaspeed-3.html Mazdaspeed3 Cold Air Intake v2 - $125 shipped SOLD to HeroinBob

I've got a set of euro tails from a Protege/323 (1999 to 2003 sedan) for sale. APC brand, they were installed on the car for a few years and then it was wrecked in a front end collision. They've been in a box on my shelf for a few years but I cleaned them up and listed on ebay. I figure I might get some more interest if I post here, and potential buyers will be protected by ebay and paypal :D Here is a link to the auction: http://www.ebay.com/itm/MAZDA-PROTEG...#ht_500wt_1413 I used the same username here so you don't think this is junk/spam. If you have any questions/concerns or want to get a hold of me, please do so through ebay. I will be checking that more often than here. Thanks!

Corksport shorty down pipe in good condition. Gasket is pretty bad though (might still work and not leak) but cheap to replace. $15 from CS or you can find a 3" donut gasket at autozone probably for $5 or so. Would love to keep is but plans on having this installed along with RB manifold is down the drain, thanks to the BS that is going on with them right now. Don't feel like installing this alone since I have a low key setup that I am happy with (gutted cats) $190 shipped

looking for 46$ shipped (plus paypal fee's) no issues just upgraded to an AUX plug. goes for 69.99 brand new at walmart http://www.walmart.com/ip/Monster-Cable-129345-00-iCarPlay-Wireless-500-FM-Transmitter-For-iPod-With-8-Channel-Presets/13060467

Hey guys, For sale today: SOLDCPE catback exhaust: $400 obo + shipping ( exhaust has no muffler but does have a resonator. It sounds PERFECT with factory downpipe) heres a video: http://www.youtube.com/watch?v=DPheytO0uMY ATP Cat-less downpipe: $370 obo + shipping no cat, just for performance (fits the stock exhaust and cpe just fine)

Real Gram Lights, Real Rays Center caps, Real Rays Lugs Asking $1400 for the set without tires, plus shipping. Its a good price when you consider what all these things cost new the wheels are perfect, no scratches no curbing nothing, if I had to rate them I'd say 9.5/10, just because one of the lugs is a bit scuffed up from taking the wheel off, other than that everything is perfect.

So in my quest to go BT i have to get rid of some things. i have some gorilla Locking tuner lugs, i bought mcgaurd a while back so i don't need these. 50$ shipped and HKS adapter for the MS flange, i have hks flange on my custom FMIC so ill let this go for 25$ shipped. Prices are OBO so PM me an offer. I need to get these off my hands im like 40$ short from getting everything i neeed

ive got a 2002 65k miles standard tranny. worked great when pulled. no grinding clunking or anything. car was hit so im parting it out. its dirty cause of a torn cv boot that spewed haha. i will clean it up before shipping. the slave cylinder, clutch fork, and all the brackets on it come with it. asking $450 plus shipping. If needed for extra i can pull the clutch pedal and clutch cylinder

Cleaning out some stuff, more to come. first i have a Mishimoto OCC for sale, its a vary nice, quality catch can. level of sight window, drain plug, solid construction. multi position top so you can adjust location of inlet and outlet. i also have a brand new PCV valve from the mazda dealership that i forgot to take a picture of but you will want it to install it correctly. looking to get $75 shipped for everything.

Free: Good condition. Were replaced due to front suspension creaking but turned out to be sway bar bushings. Fits G1 MZ5 and MZ3. Pick up only. SW Houston. PM.

My MSP was recently hit by a drunk driver in the rear....... so selling anything off of it. I will get pictures of everything once i start taking everything out. Just letting everyone know ahead of time. Let me know if anyone is interested and i will get pictures and negotiate a price. Everything on the car is in good shape besides the rear bumper, trunk lid, and tail lights and the muffler and tip of the exhaust. Thanks!!

This is a really old thread that isn't being updated--for an up to date parts list please see this thread

Close.

$185 shipped in the US. PayPal only.

SSAFC v2 never used have cd and comes with 4 preloaded maps depending on your mods- SOLD Autometer wideband o2 gauge only taken out of box for picture- SOLD I have paypal just pm if interested.

Sellin the last of my parts. Turbo xs downpipe and receptor for ms3. Will need new gaskets is all. $150 each or $250 plus shipping Greddy electronic amber boost gauge with redline performance vent pod. $120 shipped. Comes with everything ya need

Plain and simple, no description should be needed. The test pipe has an extra bung welded into it. Wrapped with that titanium stuff. DP- $200 TP- $105 IMG_2168 by dnhan85, on Flickr

Hi, I am selling my 2010 Mazda5 Sport, with a 2.3L engine and 5-speed manual (stick) transmission, and only 6,200 original miles. This is the newest pre-Nagare design Mazda5 5MT that you will find on sale! This is my personal weekend car and it has received all maintenance needed (had its first oil change at 5,000 miles with Mobil 1 5W-20 Synthetic engine oil and Mobil 1 premium oil filter), and it's well equipped with some genuine Mazda accessories. The car is fun to drive with the 5-speed manual transmission, with zippy acceleration and excellent handling characteristics that is rarely found in a 6-passenger vehicle. I have gotten as much as 34mpg on a 400 mile trip with mostly highway miles, which is very economical and a definite...

recently bought a 2003.5 msp - bumper is from a standard protege. Rockauto has reconditioned MSPbumpers for 142.79 + 101 shipping.. with 3 or more bumpers its $135.15 for shipping. looking to do a small group buy for the MSP Bumper cover - pickup only from Wake Forest NC. have one forum member interested, with 3 bumpers the total cost is $187.24 picked up + paypal fee from Rockauto site "RECONDITIONED parts are OE quality, have been reconditioned and are ready for preparation and paint. Primer color of parts may vary." i called and got the same line - should be like new VARIOUS MFR Part # MA1000184 More Information About this Part {#BN7H50031AA} 4dr sedan; w/MP3/Mazdaspeed package; prime; Front [Reconditioned] Part Image -...

Mods... please delete other thread. I've pm'd several of you to unlock the other thread, but this seems faster. Onto the *repost*... Bought this to experiment with fitment on the DISI MZR... but fitment was failment: womp womp So my loss is your gain (or hopefully my "breaking even" is your gain). I paid $260 with shipping, and i'd like to get my money back, or close to it. So the only thing i can offer to "increase" the value of this thing is free powder coating, lol. Here's a couple pics: The gasket on the back plate broke the second i removed it... Whomever buys is should really smooth out the casting flash on the v-stacks, and then just use some RTV when they put the plate back on (the gasket it came with probably...