Mazdas247 Marketplace

well i have all these stock parts and some others laying around, and if they don't sell quickly I'll probably just throw them away. not set on prices so feel free to make offers... Kuda accessory mount - $25 shipped cobb intake (no bracket support or ability to attach as that was broke) - $65 shipped (SOLD) stock mid-pipe - $60 shipped (SOLD) stock pre-cat - $50 shipped stock air box, resonator - $30 shipped stock air filter, only on for 1000 miles - $10 shipped stock turbo inlet - $20 shipped (SOLD) stock intake mount - $10 shipped stock rear diff mount - $25 shipped mazdaspeed license plate frame - SOLD cobb ms3 intake bracket - $8 shipped (SOLD) stock valve cover vent hose - $10 shipped stock rear motor mount - $25 shipped...

"Almost Spring" Cleaning.... All this came off my car as I did various upgrades over time. At the time of removal, all worked good. The prices do not include shipping. PM me your zip and I will reply with the shipping quote for the CONTINENTAL US only. Buyer is responsible for any Paypal fees. Thanks for looking. SMIC & Piping $25 SOLD - No cracks in piping. Air Box w/ Intake Pipe $10 SOLD Coils $10 BPV $10 SOLD Heat Shield $10 SOLD H.V.L.P. Paint Guns SOLD BRAND NEW! I bought a few years ago thinking I would get into painting some of my pieces/upgrades myself. Never ended up happening. [/IMG] [/IMG]

Used Unichip for sale or possible trade for snowboard rack and rails. Call **removed pending pics**.

Have some stuff for sale. Selling due to need the money and well I don't have the use for these items. Please read disclaimers as some items will need some work. Buyer will fully know what is wrong/work needed to be done so there won't be any suprises. Don't believe in doing shady business. If there are any questions please feel free to PM me. Paypal only Sorry for crappy cell phone pics CP-e V1 Catted Downpipe ----------------------- $200 shipped OBO Disclaimer: V1 stainless flange to the turbo is cracked. Will include revised cast flange, should not crack. Threw a CEL, went away then came back, went away did the defouler trick just in case. No issues, ran great, sounds good. PG V1-2 Exhaust Manifold Non EWG ----------------...

Really no need for this, I was going to rebuild it, but I have gone another route with my future trackdays. Original trans off of my MS3, had about 53k when I pulled it to do a clutch. I had a grind on downshifts from 3-2 at nearly any RPM, but nothing on 1-2 or 2-3 upshifts even at WOT.. which doesnt sound like a syncro issue. In the 53k, the fluid had been changed with MT90 twice, so Im pretty overkill on maintenance. I honestly am not sure what the issue could be. I drained the fluid expecting to have metal shavings or flakes, but with a magnet through the gear oil I had nothing, and with straining it through a screen I had nothing either... I had a killer deal one out of a wrecked unit, so I went ahead and swapped in the lower...

Real Momo Pomelli Shadow Carbon Fiber shift knob for sale. I've got the original box and all packaging/instructions/parts. I installed it once and took it off about a week later just because I didn't like it. Universal installation. Perfect condition asking for $70 shipped. PM me if interested.

I have an unopened never used Mazdaspeed intake. It also includes an unopened bottle of filter cleaner. No air straighteners. Asking 300 shipped. PM if interested. They are selling for 350 other places. Save some money and pick this up.

This was my mother's car, I've owned it for less than a year. - Clean title, no outstanding loan so title can be transferred immediately. - Current NYS inspection and emissions, passed on April 2012. - 6-speed automatic with paddle shifters on steering wheel. - new summer performance tires on stock alloy rims. - Red exterior, flawless detailed black cloth interior, factory cloth floormats in like-new condition. - Factory stereo with steering wheel controls and in-dash 6-CD changer. - Complete service records available. - Still under 5year/60,000 mile powertrain warranty - Never been raced or autocrossed This car has been detailed and is in perfect showroom-like condition except that the driver's door has a scratch from a key (see...

Hello, I'm selling one pair of 25mm Ichiba v2 spacers in NEW condition. http://www.ichibausa.com/ProductDetails.asp?ProductCode=WS-5511467C I took them out of the box to bolt them onto my 350z, and I realized the thread size was wrong. There is absolutely nothing wrong with these spacers, they are brand new, unfortunately they don't fit my car. My loss is your gain, they retail for $135 plus ~$20 shipping from Ichiba. I'm asking $130 shipped obo

Returning my car to stock! Hypertech - sold Corksport RMM inserts - $25 shipped

As the title says.. these are miscellaneous parts I'm selling and may add more as soon as i can find them...If you have a particular questions about an item(s) PLEASE PM me.. I will only accept Paypal and will ship to the Address listed in your Paypal (unless you have a business address I could ship to, to make shipping less expensive). All items are Sold As Is..and shipped to the Lower 48 US only. Thanks for looking.. VERY RARE Mazdaspeed Headrest covers asking 50 shipped VERY RARE Mazdaspeed Neck support pillows asking 45 shipped VERY RARE Mazdaspeed shoulder belt pads SOLD Oil filter relocation Kit asking 65 Type-S BOV steel weld-on adapter asking 12 shipped USED MSP Throttle body asking 40 shipped BNIB Exhaust manifold...

Koya CR Flat Black Work Reps 18x7.5 +40 5x114.3/100 Nla.................................

MPI tuner, under 70k on suspension. 150 shipped for the tuner 200 shipped for the suspension Thad.

Pics are here https://picasaweb.google.com/111179442365291253508/ProtegeStuffForSale# Prices are shipped in the continental U.S., will ship outside that for an additional cost. I'm willing to negotiate on prices if you are buying multiple things as it makes life easier for me! Zeitronix ZT2 gauge system - $325 shipped Wideband AFR, exhaust gas temperature, and boost sensors included. It can datalog and be wired into your RPM, very cool! I paid over $600 for this system. I'll include my DIN mounting hardware as well (it goes right below your CD player) Turbosmart manual boost controller - $40 shipped Crank up the boost and blow your motor like me!!! :) Mazda owner's manual case - $15 shipped Owner's manual not included, but case...

Hello everyone, i just bought my first mazda its a 95' Protege DX the shifter rattles like crazy and i have wacked a couple of knees shifting in reverse. Id like to change it out for a short shifter,and Ive found one online but it says its for a Protege 5..... 1. does it matter? 2. will it fit? 3. will it quiet the awfull noise!? (whistle)

DO Meth Kit: Stage 2 with MAP-wire Progressive Controller, 250psi pump, 3qt tank, ~12ft nylon tubing, add-a-fuse, DO3 nozzle, check valve, harware. $250 shipped Sold 3ft 2.5" ID Red Silicone Hose: I used this to make long couplers for my intercooler piping, really makes things a lot easier if youre building a custom kit. Brand new. This stuff isnt too cheap, get it here for $30 shipped. 2.5" intercooler piping: Not a kit but it might get you started. Brand new. Includes 2 black 90deg L pipes, 2 black 18" straight pipes, 4 red couplers, 4 stainless steel t-bolt clamps. $60 shipped

SOLD I'm putting my True Red 2008 Mazdaspeed3 up for sale. It has 34xxx miles and will continue to go up as it is my daily driver. Mostly stock, it has: Cobb Short Ram Intake Corksport Test Pipe Corksport Cat-back exhaust Stiffer Shifter Bushings Rally Armor Mudflaps - black with red logo 20% tints Blacked out emblems The reason I am selling it is I would like to get into something AWD or get rid of my car payment =). The car has 4 brand new front tires (1500 miles). This car has been babied since day 1 with weekly details. The car was never raced, auto crossed, and has never seen a track. The car has also been garage kept since day one, and has never seen snow! still under warranty until 70,000 miles!! cons: can be seen in...

Stock mid-pipe, no hardware------------$50+shipping OBO Stock airbox, no filter-------------------$30+shipping OBO

James Barone Racing Performance Aftermarket Parts & Accessories JBR 3-Way Adjustable Rear Sway Bars $195.00 shipping included!! (Domestic Only) International Shipping Also Available Constructed out of 32mm 4130 Chromoly tubing with 13mm thick solid steel arms, Tig welded inside and out with capped ends. Powder coated in either Red or Black for ultimate corrosion resistance. The JBR Sway Bar Kit Includes: -New Greasable Polyurethane Mounting Bushings & Brackets -Grease -Loctite -2 12mm Lock Washers -Lifetime Warranty -Online Installation Instructions Everything you need to get the job done right with confidence!! Applications Available: 07'-2012 MAZDASPEED 3 04'-2012 MAZDA 3 Sedan and 5 Door 06'-2012 MAZDA 5 Specifications...

I haven't been on in awhile because I total'd my P5 in August. Anyways I got some leftover stuff that I really don't need at all. Ok picture time! Oh and if you post or pm it might take time to get back to you... so you can call or text me at 7203391032 if you prefer. Stock Midpipe 25+ shipping bad Ebay Headers $10+shipping (there gonna need some welding but the O2 bung is welded closed for ya already!!!) (oh they fit my car well finally, but idk about yours) Stock rear sway bar $10+shipping Stock dirty/rusted J-pipe with cable $10+shipping Spare Tire never used $35+shipping Stock/OEM Protege'5 rims with 2 usable nice Pirelli Tires $200+shipping (guess I could take tires off for cheaper shipping but then I would have to...