Mazdas247 Marketplace

HI I AM SELLING A MP3 INTAKE MANIFOLD HAVE IT ON ANOTHER POST FOR $110 + SHIPPING BUT I NEED THE MONEY SO I AM ASKING $70 + SHIPPING PLEASE FEEL FREE TO CONTACT ME WITH ANY QUESTIONS OR OFFERS THANKS

Hey everyone, I sold my MSP last week and I'm looking to sell off a few remaining things before I move half way across the country for a new job. I need to have everything on this post sold by Friday in the hopes of getting it in the mail before I begin my move on Sunday. I'll be moving to Oklahoma City, so if you are in OKC or Florida, Southern Alabama, Louisiana, East Texas or Oklahoma we might be able to work out meeting up during my drive. On to the parts. Kenwood KCA-iP500 - This is an ipod control unit for kenwood units. You can search the kenwood site to see if your radio is supported. I don't think it works with iphones, but I used it with my ipod video the whole time I had my MSP. Thing worked like a charm and allows...

I've had a change of plan and won't be able to use my forged setup so here it is: K1 Rods with Wiseco Pistons and ARP hardware, stock bore, 8.5:1 compression ratio, standard length rods - used for approximately 20k miles - $500 (Pending with money down to 719prottege) FS Block (with good crank) - $150 (Sold to Brewer) Freshly cleaned head - $150 Cams - $50 If you buy the block you can also have the windage tray and oil pan. Package deal for everything - $650 - If you buy it all you'll still need a head gasket, head studs or bolts, oil pump, water pump, valve cover, etc. The bearings in the bottom look new, but it might be worth replacing them since its easy to do now. The bottom end is assembled, but not torqued. I will ship at...

Hypertech tuner. Bought off a member from msf. Asking $250 FMIC is all CXRacing parts but it isn't the kit that CXRacing sells for the MS6. Included are (1) U pipe, (2) straight pipes, (2) 70*, (2) 90*, (2) 45*, bov flange, all couplers, and tbolt clamps. Core size is 27"x6"x2.5". Asking $400 Obo

Couldn't fit all of this content in my other for sale thread, so here we go, the next batch of parts on the market! SOLDSPC Adjustable Camber ArmsSOLD SOLDTri-Point Engineering Rear SwaybarSOLD Tri-Point Engineering Adjustable Rear Endlinks Only on the car for about 3-4 months, and will fit any 2004-2009 Mazda3/Speed3 swaybar (might work on second gens, you will want to confirm before buying). These things are beefy and will not break like stock parts, and are in perfect working order. Asking $90 shipped anywhere in the continental U.S.

SOLD. Mods please close!

I'm clearing out some of the stuff I have laying around... First up, the Protege Garage FMIC Will come with 2 IC cores - was going to replace the lower IC with the one with the red caps because I ran into a curb stop and the ambient air temp sensor bracket in the bumper skin crushed a few of the bottom fins (see close up pic). Pipes have normal wear and tear - worst is in the close up of rubbing mark. Tapped for Meth. Looking for - $350 shipped obo - SOLD Next up, an older Tial Wastegate I ran for less than 1 year on my old '02 Nissan Maxima with a custom turbo setup. Has been sitting in a box for the last 3 years. IIRC, it is the F46 model. Includes 2 flanges and all bolts. Looking for - $250 shipped obo Here's a rear trunk...

Hi Guys, The day has come where I have decided to part ways with my MS3. Here's what I have for sale: Set of 4 Rota DPT black wheels 17 x 8 wrapped in Bridgestone RE760 tires: $1100 plus shipping or local Street unit Test pipe: SOLD Muteki SR48 Open Lug Nuts GunMetal: $40 shipped *Brand new Prosport Electric boost guage: SOLD HKS R-Suction intake: SOLD Forge BPV chrome: SOLD Set of 4 winter wheels and tires Blizzak Revo1 on 16" steelies: $250 plus shipping Set of 4 Rota DPT black wheels 17 x 8 wrapped in Bridgestone RE760 tires. these are practically brand new, very low miles 8/32 - 9/32 left. Street unit Test pipe. used about 35K. will probably need new hardware but it is included. Muteki SR48 Open Lug Nuts GunMetal *Brand...

SOLD But I do have BC Racing Coilovers for sale now.

MSP PARTS FOR SALE - HKS SSQV3 BOV, Stock BP valve, Stock lug nuts Everything came off my 2003.5 Mazdaspeed Protege. All parts work fine, accepting PAYPAL only and shipping to buyers address only. PM me if interested. HKS SSQV3 BOV (imitation/fake/knock off. tested it and works fine. no leaks/problems.) - $100 shipped or best offer Stock lug nuts (14 pieces) - $35 shipped or best offer Stock Bypass valve - $40 shipped or best offer Stock headlights (a little foggy) - SOLD Tein Springs - SOLD Stock shifter - SOLD NRG short hub - SOLD

Hi everyone. I have a never-been used set of OEM foglights for a non-sport Mazda 6. These will fit models from 2003 to 2005 inclusive. Bought these from Showcase Mazda back in the day and never got to install them because I switched to a sport model 6. Looking for $70, plus shipping (from 11429). Everything - foglights, headlight stalk, wiring harness etc. is included. I think I even still have the instructions for install lol. Thanks for looking. Adlai

Going to start clearing out all the left over mazda parts from the various cars over the years. First up is a DG carbon fiber engine cover. Fits the mazdaspeed valve cover without modification and would require some custom brackets to go on any other 2.0L engine (may fit on another engine but i am unsure). The cover has been custom airbrushed with real looking flames, personally i think its one of the better jobs i have seen. The engine cover is not flawless as its been on 3 cars thus far and has two cracks and some finish chipped off around the oil cap area, i tried to take pictures of this as they aren't huge but i thought the buyer should know about it. Asking $100 shipped in the lower 48

The manzier's part number is 0000-8g-J01. I paid $143.16 for the bro. You can have this bra for $55 with free shipping. SOLD

MSD Dash Hawk 2.0, N2MB WOT BOX & CHEAP CP-E Standback v2 Selling my Dash Hawk Data Logger for 200 shipped SOLD. Selling my CP-E Standback for 125obo Shipped IMO, better tuning option than the hypertech for about half the price. Allows you to actually tune for what you have. Extremely simply to tune with. Plus for this price point can you really beat it? Lastly I have the N2MB WOT BOX, This is the universal Two-step and No lift shift device. Works on just about any car. Super easy install and defiantly worth it. Looking for 100 shipped. This is the double feature WOT BOX. SOLD comes with everything you need, instructions and software is easily downloadable from website or I can provide as well.

Just reverted back to my stock exhaust and I have no use for this now. I plan to sell this LOCALLY, do not want to deal with shipping at all! I bought and installed this about 3 years ago, probably racked up 40k miles with it (not including the original owner, it was fairly low mileage), in Boston weather so went through a few winters with it. I did what most people did with this exhaust which was cut out the second resonator and replaced it with a Magnaflow muffler; I still have the original resonator. This modification quieted the exhaust and most desirably lowered the amount of drone. As some of you may know, the PZEV Mazda 3 has a slight different gas tank (shape) than non-PZEV Mazda 3's, so the exhaust shop welded a slightly longer...

remove thread please close/delete

FS: COBB Access Port in Box/ K&N Typhoon SRI for Mazdaspeed3/ K&N drop-in filter For sale is a Cobb Access port in box: asking $515 K&N SRI with 10,000 miles on it: asking $175 and finally a K&N drop in filter for mazda3 and mazdaspeed 3: asking $20

For sale is my '07 Mazdaspeed6 GT. The car has been great since day one, it's just time to move on. The car has 62k miles and has a brand new inspection, synthetic oil change, and pads/rotors. Also, new Goodyear Eagles all around. There are a few scuffs and scratches typical of a daily driver that's five years old but overall in very good shape. The car has been babied, professionally serviced and adult owned for its life, I have a family and have no interest in racing it. Notable options and extras: Non-nav, BOSE Premium Sound, Smart Key ignition, Prosport Boost Gauge and Mazdaspeed CAI Will take reasonable offers but not interested in any trades or lowballs. Asking $16K OBO. KBB is $17k in very good condition. I'll be glad to help...

EDIT: NEW PRICES -- Got rid of the mazda and need to get rid of the extra parts lying around. Make me an offer, all parts need to go. EDIT: More parts added in 3rd post I've had this stuff lying around for awhile with hopes of installing on my car but never got around to it. Now im short on $$ and the stuff has got to go. More will be added within the next week when i get it out of storage. Open to offers Fidanza 7lbs Flywheel - $175 shipped Sold SPEC Stage 2 Clutch (Brand New in the box) - Sold MSP Welded LSD (version 2) - $325 shipped Sold 1.8 Coil Pack conversion kit (Coil packs, NGK wires and mounting bracket) - $100 shipped Sold Thanks Alex

MS3 Mazda 3 front and rear emblem in great condition. $40 shipped or OBO.