Mazdas247 Marketplace

This cargo net came out of my 2003 Mazdaspeed Protege. I had taken the net out and forgot about it....then sold the car. I recently found the net in my garage and have no need for it. Excellent condition. Dimensions are 34" wide at the top, 30" wide at the bottom 12" tall/deep and it can stretch to about 48" wide at the top. the net itself can hold items and can be stretched to fit . Asking $5 plus shipping.

I'm selling a street unit special edition cobb tuning intake. I bought it before from a member on here but never got around to install it. The intake tube is red instead of blue and in great condition. I'm asking $125 plus shipping or local pick up in southern, nj. SOLD!

Hi All!! Up for sale is a set of Ronal 14" rims. I had these on my 97 Mazda 626 and used 195/65/14 tires. According to my scale, one of these rims weighed around 11Lb so very light! Price is $200 OBO for ALL RIMS (does not include shipping). Note: I only have hubcaps for three of the four, sorry about that, but imo they actually look 10 times better without them. All show signs of curb rash but still look good. PM me for details More pics are by request only although....you maybe charged a fee...(boom06)

I'm parting with the 3rd gen protege and am looking to clear out the driveway and garage so here's the deal. I bought the car in february with the intention of using it as a testbed for my products and as a fun driver. The business has kept me so busy I haven't been able to put it together and I've reached a point of extreme burnout. Come and get it!!!!! Spicy roller - $1000 OBO has no engine or trans in it. The wiring is intact, but the ECU is gone. The trunk needs new carpet and the release needs adjusted. Needs a battery, and front bumper support. The car comes with a torn up spicy bumper and a great condition blazing yellow bumper (obviously this would need paint). The car has Nissan wheels with winter rubber on it, but they need...

BRAND NEW H&R Trak + Wheel Spacers $100 shipped 10mm Bolt Pattern: 4x100 Center Bore: 54.1

NRG quick release for aftermarket steering wheels. comes with all original packaging! purchased from speedware motorsports $100 shipped

SOLD SOLD SOLD Parting Out with Less than 12,000 miles. DP has two bungs. DP - asking $265 shipped TP - asking $90 shipped Buy both $320 shipped

first off i do NOT have the front mount for sale. like to make that clear. second. please PM me with any questions or to contact me. i dont get on the forums much anymore so i may not see any posts here. and please be patient i dont normally check pm's till the evening, but i will respond to everyone. i have hardrace engine mounts for the rear, passenger side and transmission side of MSP's or protege sedans or wagons. these are advertised as being for manual transmission cars. not sure if they would fit autos as i dont know the difference between the mounts. i assume the tranny mount would be most different. these are used. not sure exact mileage, but the previous owner had them installed for 2 years before switching cars and...

Exhaust Depot FMIC w/a two couplers being sourced elsewhere. I'm the 2nd (possibly 3rd, can't remember) owner of this, but I personally never got the chance to actually install it (time constraints, then car got totaled). PENDING SALE...No damage (cracks, kinks, etc) other than the expected cosmetic/surface wear & tear. Not show-car quality, but perfectly functional. Asking $350 local sale, $375+shipping. Lower asking for local price as that's much preferable. Willing to drive & meet up a reasonable distance if nec. Nicer pic...same stuff, just meant to post back in June. Used 2004-2009 HATCHBK LED passenger taillight. No cracks/damage. !!!!!!!!!SOLD!!!!!!!!!!! (4) OEM cartridge filters, both large & small o-ring gaskets...

Tokico + H&R springs are local pick up only. They have about 50,000 miles on them. Three out of the four shocks are blown. H&R springs lower the car about 1.3". $100 local pick up only. Zip code: 92139. SLS 2.5" Catless Aluminized Steel for the Protege 5 or Mazdaspeed Protege bought from ProtegeGarbage, I mean ProtegeGarage. Includes gasket. No bolts included because you'll be using your stock ones. O2 bung included. $125 shipped. DG Carbon Fiber Eyelids. Faded and cracked at the bottom. Repaint them any color or mount them as is. One eyelid is chipped at the edge. Sold. Stock single disc Protege 5 radio. Left seek button is loose, but fully functional. $20 shipped.

I am a member of ****************.org with over 2000 posts, and have sold numerous items there with no issues. I am selling these as I am parting out my car. Items: 1. SOLD Sure Aeros SRI v2 in blue. This is hands down the best sri for the ms3. This includes the SURE filter, and a new amsoil filter, in the original SURE box. - $140 shipped 2. SOLD ptp/HPFPupgrade.com 2150 psi Fuel Rail Pressure Relief Valve. Used on my car for 50 miles to confirm operation, and then stored as a spare. - $175 shipped (these are $300 new) I take paypal or cash if picking up locally. I am located in Weston, FL.

12x1.5 Fits Honda, Mitsubishi, Toyota, Mazda $85 plus shipping

Fs: Mazdaspeed performance accesories cai intake for mazda3 For Sale: Mazdaspeed Performance Accesories CAI for Mazda3 (2004-2009). I also believe it fits mazda5. Never used but it has some light scratches on the intake tube and also the filter cover top is slightly bent due to improper shipping methods. Selling it because i was gonna install it in fathers car, but it got stollen. :( Includes: Intake Tube, Filter, Filter splash shield, Filter cleaners, Hose, Clamps, bolts, stickers and bushing. Asking $160 or best offer + shipping via USPS.

I turned off the green so I'm starting a conventional FS thread with pics. I still have lots of parts that aren't pictured and are posted in older threads, but I'll get to them later. All prices are SHIPPED in the continental 48. Paypal to tom@popeperformance.com ONLY if you are relaxed about shipping. I will be going to the PO on a regular basis to ship downpipes, but I won't be making special trips for one item at a time. I also don't generally supply tracking numbers. If you will have an issue with not knowing exactly what day your part shipped and/or not having tracking please shop elsewhere. I have 2 kids, a wife, a job, a business, and another project that take priority over this stuff. Please understand ahead of time. AWR front...

Mazdaspeed3 part out-updated! I have a few parts for sale. First, the CarXlink, with the bluetooth adapter I only had this installed for a short period of time nad I'm looking for 140 shipped. Cobb turbo Inlet-SOLD!!! Cobb short ram intake - 120 shipped Cobb BPV- SOLD!!!! I also have Hotchkis F+R sway bars that I'm looking to sell locally. They arent pictured because I'm not interested in shipping the larger items. I am local to San Antonio/Austin and getting to Houston wouldnt be a problem either. Thanks, Charles

Forge bpv!! Hello, I am selling these items for my brother inlaw. He is going to either sell or trade in his 2008.5 ms3 GT for a family car. Forge bpv made for the Boobaru WRX but fits perfectly on our cars , just use OEM bpv gasket, and the best thing is NO PING! Just a nice CHOOOSE sound excelent condition, has blue spring and two shims installed, only around 2000 miles on it $110 Shipped!!

just the block yes for $15 bucks. it would be perfect for forging, and being able to keep your msp on the road. I only have the block nothing else, no bent rods or cracked pistons. it dont have the oil pan or the plate where its tapped for a turbo but your msp has those parts. this is a damn steal.

SOLD Rubber Cargo Tray for Mazda3/Mazdaspeed3 - $45 shipped SOLD I have a rubber cargo tray that fits a generation 1 Mazda3 and also Mazdaspeed3. It has no rips or damage of any kind - $45 shipped It's the same one listed in the below link. http://www.mazdastuff.com/product.cfm?ProductID=2678

I had a pg manifold reflanged a few years ago and decided just to go in a different direction. The manifold allows you to use a T3 manifold in the stock location and is fitted with a 44mm ewg. I'd like to get $300 shipped for the manifold. I'm selling my HTA GT3582r b/c I don't feel like uninstalling my Gt3582r. The HTA GT3582r spools sooner and makes more power than the Gt3582r but alas I'm happy with my setup as is. Looking for $1800 shipped for the turbo. Btw, specs on the HTA Gt3582r , T3, 1.06 a/r , 3" vband discharge, 2.5" outlet/4" inlet. If someone local buys it I can fab a dp for a extra $$$$ but you must bring me your car cause as I mentioned I'm too lazy to take my set up apart or I would be installing it.

OEM bpv recirculation hose (from bpv to turbo inlet). Used for only 15k miles, MINT! 30 shipped Feedback from past buyers: iTrader reviews **PM IF INTERESTED**