Mazdas247 Marketplace

ALL prices are WITHOUT shipping included. PM me your zip and I can figure out the cost for you. I've got a 626 intake manifold that I was planning on putting on the MSP several years ago. It should be cleaned and prepped prior to install obviously. As you can see, some of the accessories are still attached but there is no throttle body included. $45 SOLD I have 2 SETS of window moldings that I was going to sand down and repaint since I was so sick of the pitting on my MSP. I had done a previous set using this method and they came out really good. $10 per set ONE SET SOLD Protege ES spoiler. I was going to have this painted titanium and put it on my MSP to get a more subtle look. Includes LED 3rd brake light pigtail. $20

Sold>.

Greddy Ti-C exhaust and more Haven't had time to repost new pics but will try and get some new ones sometime this week. Anyways the exhaust is still up for grabs. I can of course provide pictures faster through text, 209-914-3534. Full 3 inch piping, burnt tips. absolutely nothing wrong with it. has bolts and gaskets needed to install. it's ready for a new owner! it's just sitting in the garage collecting dust since the ms3 is gone. Asking 480 obo. Thanks I accept paypal. Just PM for further details Stock BOV $20 Chrome Fuel Door $25 Stock Inlet $20 4-point Racing Harness $10 List Date: 3/4/2013 For more info, click here to view the original listing: Greddy Ti-C exhaust and more --------------------------------------...

2-12" slim Fan = $30 SOLD Blue vacuum manifold = $25 SOLD Exhaust manifold gaskets (All together) = $25 shipped Mazdaspeed Ecu (Flashed by dealer) = $135 SOLD Protege 5 =OEM shifter = $45 Mazdaspeed Door Sill (It has a small dent on the driver side) = $60 SOLD Guage pod = $30 SOLD EGR Valve (clean in good working condition) = $35 shipped CR3 Plate New = $50 SOLD Guage Rings = $50 SOLD MSP manifold heat shield = $35 SOLD Glowshift digital boost guage = $40 SOLD Sorry I can only ship within US.... I accept paypal....rollyng2001 at yahoo.com [/URL] [/URL]

i got a new set of xxr 002 wheels for sale for 400 i need gone by friday i try to put a pic but i couldnt for some wierd reason

CX7 *BRAND NEW* Powerslot Slotted rotors (all 4) CX7 *BRAND NEW* Still in box never used all 4 included POWERSLOT rotors 126.45077SR & 126.45077SL 126.45076SR & 126.45076SL NOTE: SHIPPING WIL BE ALOT FOR THESE ITEMS, I WILL TRY TO EAT AS MUCH OF THE SHIPPING COST AS POSSIBLE TO MAKE A SELL!! buyer will pay shipping (shipping may vary from state to state) Paypal as gift or add 3% List Date: 4/4/2013 For more info, click here to view the original listing: CX7 *BRAND NEW* Powerslot Slotted rotors (all 4) -------------------------------------- On Sale For: $300 + $0 Shipping Retails for: $340 | You Save $40 | That's a 11% Discount! --------------------------------------

Haltech SP 500 pre-wired - SOLD Garrett 2860RS .86 turbo - SOLD GTX 5th gear .71 never installed - SOLD 505 zoom intake manifold - SOLD MZ6 front brake kit (11.8") - SOLD OEM MAF - SOLD 440cc wrx injectors - SOLD JoeP MBC - SOLD JoeP FCD - SOLD Hub Assembly RF - SOLD WeaponR Overflow tank - SOLD Technafit SS brake lines (rear only) brand new - $30 All prices include shipping to lower 48 and im flexible, shoot me an offer.

2005 Shinka RX-8 listing the shinka for a friend. sad to see it go... up for sale is a 2005 mazda RX-8 Shinka.... -short bio- car was purchased in richmond virginia in 2005.These cars did not come with the spoiler from the factory so one was added and color matched at the dealer at time of purchase. its been garage kept since time of purchase, its a little dusty right now from the garage door going up and down all the time. new pics will be added this weekend after it gets a bath and some sun/drive time. :) -Specs- 2005 Shinka trim first generation se3p !7,000 miles black cherry paint parchment leather interior 8 point power seats suicide rear doors on both sides chrome 18 inch wheels blistein suspension uerothane foam injected cross...

steering wheel ,air bag w/ moldings in between the front and rear doors 150.00 plus shipping muffler 100.00 PLUS SHIPPING* fuel rail with 4 injectors 175.00 shipped clock spring with switches 100.00 shipped

Car was totaled on 10/13/11 FS: Mazdaspeed Protege for sale or parts - 19K miles Asking price is $3,500 But I wont lower it too much. I have a 2003 Mazdaspeed Protege. The car has 19K miles. The engine and transmission run perfect. I fixed the little transmission leak coming from the shift rod, I have documents for that. All stock, no modifications. The vehicle does have a salvaged title due to a front-end collisional back in 2003 The car has been fixed and painted, but like all cars it does have little dents and scratches. The paint does have some over spray on the rear driver door/quarter panel, but I included a picture for the visual aspect. Its not that bad at all. I never registered it as non-op. So...

2007 Mazda 5, Sport Manual, 35000 miles for sale: 2007 Mazda 5, sport trim, manual 5 speeds, dark grey. VIN JM1CR293170149362. One owner, kept in the garage, only neighborhood driving, low mileage (34,700), car is in good conditions (a few scratches on the bumper). I could send you the file with Auto check report. I only sell because I am moving out of the country. Will only deal locally (Houston, TX) in person. Contact e-mail: begemot239@hotmail.com Phone; (1) 281 627 6446 List Date: 5/30/2013 For more info, click here to view the original listing: 2007 Mazda 5, Sport Manual, 35000 miles -------------------------------------- On Sale For: $10500 + $0 Shipping --------------------------------------

Selling my stock exhaust manifold and heatshield because i upgraded to a thunder manifold and dont need this anymore. The manifold had 2 small cracks that didnt go through all the way and they have been welded, other than that nothing wrong with the manifold at all. Asking $100 shipped or best offer

Mazdaspeed badge is BRAND NEW, just got it in the mail today, but i ended up ordering two by accident. (Has 3M sticky tape on opposite side) Protege was taken off my MSP, still in excellent condition there's no scratches or anything. Still has the two knubs on the back to stick into the trunk... Turbo badge was bought off protegegarage from the previous owner, i took it off the day i bought it... never was big on badges. $25/Mazdaspeed shipped $15/Protege shipped $15/Turbo shipped $40/ALL shipped

Selling my spare MS3 Sport passenger headlight- never used- asking $150+shipping Price Lowered! asking $100 plus shipping

Mazdaspeed Protege MSP UniChip Uni-Chip Mke offer? Used but excellent working condition unichip for mazdaspeed protege. I have the instructions and they are included. Sells for $700 new. Went to stand alone. List Date: 5/28/2013 For more info, click here to view the original listing: Mazdaspeed Protege MSP UniChip Uni-Chip Mke offer? -------------------------------------- This item is no longer available. --------------------------------------

Koni FSD with MS3 springs Hi All, Selling an assembled set of Koni FSD with Mazdaspeed3 springs with 20k miles - $380 plus shipping. Thanks! List Date: 5/28/2013

Racing Beat rear swaybar, endlinks, Koni FSD/MS3 Springs, Street Unit RMM Hi All, I am selling some brand new parts and some parts are in used, but in great condition. This was for a 2005 Mazda 3, which should fit 2004 to 2009 also. Assembled set of Koni FSD with Mazdaspeed3 springs with 20k miles - $380 plus shipping Racing Beat rear swaybar with Brand New Energy Suspension bushings - Sold Brand New MOOG Front (K80235) and rear (K80867) endlinks - $50 for front and $50 for rear shipped. Brand New NGK Iridium IX (TR6IX) spark plugs - $25 shipped Street Unit 62A Rear motor mount - $70 shipped My reputation as a seller is excellent on zilvia.net, amongst other forums. PM me if interested. Thanks! List Date: 5/28/2013...

I have a stock differential and stock cam gears for sale. Both came out of an 01 MP3. Diff has around 80,000 miles on it, unsure on cam gears. $25 shipped for cam gears, $75 shipped for diff. Included shipping is for lower 48 in US only. I can calculate shipping for other places.

Parts pulled at 20k Miles All prices are BEFORE SHIPPING. Shipping will be negotiated via pm, phone, or email. OEM MS6 Suspension, great condition. $200 OEM MS6 1st Cat/DP. pulled apart but all pieces included $100 OEM MS6 2nd Cat $100 OEM Intercooler Shroud $25 OEM MS6 Trunk Trim Piece. Trunk Latch Piece. $30 OEM Turbo Inlet Pipe, One Broken Clip $25 OEM MS6 RMM $25 H&R Spanner Wrenches, Off Street Performance Coilovers $10 CP-e SRI to OEM TIP Coupler $5 18 Lugnuts & Key, Oil Cap, Misc Swaybar parts. Make me an offer

steedspeed ported & polished im Hello everybody have some parts for sale steedspeed v2 manifold it will need new egr tube and one stud to be drilled out - $500 + shipping Fully ported & polished intake manifold signature sound satin black coating and polishing - $250 + shipping Oem rear racing beat sway bar bushing + mounting brackets in good condition - $20 +shipping 03 mazdaspeed protege oem fog lights including mounting brackets plus harness and interior button - $100 shipped Nology wires w/ the mounting bracket with grounding wire coil packs not included - $80 shipped (i need stock set up for my second speed) AEM Intake with carb sticker - $50 shipped plus urs stock MSP OEM left taillight no cracks - $50 shipped Forge...