Mazdas247 Marketplace

Sold Parts Engine Trans Rear bumper Seats Radiator Sub Enclosure Mid pipe Shift knob Pedals Door Sills Floor Mats Turbo Engine harness Steering wheel Hood Head lights Driver fender Grill Available parts Front LX bumper Side skirts 2 sets (1 set has a cut in one of them) Truck Spoiler Dash Mazdaspeed Cluster Driver door mirror Passenger Door mirror (was broken off and then repaired) passenger fender All for doors Steering rack Factory turbo manifold Center console Other odds and ends Set of 4 factory silver 5 spoke protege 5 wheels 16" With tires. (1 is low tread, other 3 is 50% or so) Set of 4 aftermarket black and silver wheels 17" With tires. (Pictured) Tread is 85% What is anyone looking for. Pics can be available on request...

This is a Protege specific 3rd Brake light flasher that I built. Has the protege wiring harness for plug and play installation. For the sedan with the spoiler light it will install under the trunk lid (see photo) (30 second install) For the P5 it will install under the rear spoiler (10 minute install) For the rear deck mounted light it will install under the deck. (30 second install) It is fully adjustable for the number and rate of flashes. Once the predefined number of flashes have occurred the 3rd brake light will remain solid until the brake is pressed again (complies with Canadian and US laws). Video of it in action https://skydrive.live.com/embed?cid=3391157111DAEFEB&resid=3391157111DAEFEB%21120&authkey=AHZq2qLVLY_wqGE $45...

I'm selling my speed6 I'm gonna just post my Craigslist add my phone is having trouble uploading photos but anyway car has been great I'm asking 13 but would sell to u guys 12,500 so lmk if your interested texting results in faster response my number is on my add.. [link removed]

Trans With Torsen Revised, Engine, and Fidanza flywheel transmission with a revised torsen limited slip differential I got from protg garage asking $600 picked up only engine with a slight rod knock at 2500 rpm in cylinder 3 perfect for a engine build asking $250 obo pick up only Fidanza flywheel with only about 15k miles on it asking $200 obo +shipping

So I have a almost brand new MSP lip that I was gonna slap on but lately I'm feeling the SEDAN lip.....Does anyone want trade? Of course your lip would have to be in similar condition to mine

2008 Mazdaspeed 3 Rims - Willing to ship - 1 good 2 not so good Price Drop! I have a set of 4 mazdaspeed 3 wheels. I have driven on them for 16k miles, they have 37k on them total. 2 of the wheels are straight and did not cause any vibrations 2 of them caused vibrations and spent their time on the back. All 4 of them have minor surface finish blemishes There are only 3 center caps - they go first come first serve if the wheels are sold individually. Shipping estimates are $22.00 per wheel FedEx to conti US. Wheels are located in Battle Creek MI - Willing meet up within 1 hr radius. $75 + shipping per good wheel (#1 and 2) $200+shipping for the set

Set of Mazda2 Steel Wheels with TPMS and Covers FOR SALE I have a set of steel wheels from my 2012 Mazda2. They have ~5000 miles on them. All have around 7mm or 9/32nd of thread on them. All have their TPMS and nearly perfect wheel covers. One of the cover has minor scratches you can see in the picture. Unfortunately, one of the tire was damaged when I swiped a curve. As you can see in the pictures, sidewall was damaged and is beyond repair. Wheel however, only received small damage. $175 - OBO Strongly prefer loca pick up, but willing to meet someone within 250miles of zipcode 30024. Thank you. List Date: 8/20/2013 For more info, click here to view the original listing: Set of Mazda2 Steel Wheels with TPMS and Covers...

Set of 4x100 15x6 Wheels with Yokohama S.Drive FOR SALE I have a set of take off wheels from Ford Escort GT. I had it on my 2012 Mazda2 for ~6000 miles. They are not pretty or light by any standards, but it will serve well as nice backup or mount some snows and use them as rally-x wheels. Size is 15x6, bolt pattern of 4x100, hub bore of 54.1. Tires mounted are Yokohama S.drive in 195/55/15. Also included are set of four 3mm spacers in same bolt pattern and hub bore. $225 - OBO Strongly prefer local pick up, but willing meet someone within 250miles of zipcode 30024. Thank you. List Date: 8/20/2013 For more info, click here to view the original listing: Set of 4x100 15x6 Wheels with Yokohama S.Drive...

like title says, i'm parting ways with my MSP....if anyone wants her come get her....just put a newer engine (89K miles)....has a lot of work done....for pics inbox me....a few details, 149K on body, 89 on engine, FMIC, hard pipes, relocated MAF, aftermarket intake, blox boost controller, vibrant vacuum mani, turboXS BOV, SSAFC, fresh paint on front bumper, comes with tons of extra's including K-1 H-beams brand new, peuter pistons, spare block (needs bored) spare cams, spare valve cover, stock intake with fuel rail, 440 injectors, half pint of each stage paint, super clean interior 9.5 of 10, 9 of 10 exterior (due to hood primered black super thick and primer cracked) very small suface rust (bubbling only) on right rear door on window...

Here I have for you guys is a brand new mazdaspeed low temp thermostat still in the sealed box and 4-wrx 440cc fuel injectors that are in excellent condition. The injectors are used in some mazdaspeed protege's. I'm selling each for 80$ shipped or both for 150$ shipped. PM me for any questions.

Mazda CX-7 OEM Full Seat Cover Set, Taken off when new, Mint I took these seat covers off my 2007 Mazda CX-7 when new. They have been in the box since. As new as new gets. Completely OEM/factory seat cover set from Mazda. This is the full set, front and rear. Easy investment on new seat covers and they are easy to put on. Only $50, plus $20 shipping. Located in Austin, TX area. I am new to this forum, but was very active on the old CX7 forum. List Date: 8/19/2013 For more info, click here to view the original listing: Mazda CX-7 OEM Full Seat Cover Set, Taken off when new, Mint -------------------------------------- On Sale For: $50 + $20 Shipping --------------------------------------

Hey Guys I have a DG Carbon Fiber Hood for Mazdaspeed Protege, Protege 5, or Protege. It is in great condition only problem is it has a small crack in it right around where the windshield wiper nozzle goes in you can see it in the picture its not big AT ALL. It was bought from protege garage for 795.00 link is at the bottom where it was bought from. I'm looking to get 300.00 obo because of the fact that its used please local pick up only unless you will pay for all of the shipping. Im located in CT pm or comment if you are interested thanks! Here's the link where it was bought from - http://www.protegegarage.com/296-product-296.html Pictures:

I recently gutted the interior of my P5 and don't have the space to store everything I removed. So before I throw all of this stuff out, if you'd like anything and you're willing to drive to come pick it up, it's yours, free of charge! Here's the mess: It's pretty much everything except the front seats, the carpet, front door liners, seat belts, radio, and the parts you use for driving (steering wheel, gauges, etc). There's also the A/C system which was working when I removed it. So if you need a new compressor this may be your lucky day :) PM me for details, I'm in the Laval area.

Ive had this stuff forever, turns out i dont care as much about my car anymore so lets see if anyone else does. I havent been on here in a while and maybe im way off with pricing but well see. If you want more/better pics of anything shoot me a PM. Changed the pics to reflect whats left ForceFed Gauge Pod - New never installed - SOLD Lightweight Medival Pullies - PS v2 is brand new (also comes with V1) WP is used in good condition, ALT is used in good condition, and crank is V1 also in good condition. The outer plate of the crank is slightly loose but with fresh screws can be tightened - SOLD 2.5 pipe with hks bov flange welded on. Real nice weld, beaded ends - 25 shipped AEM Wideband - I never used it but was bought used from someone...

Hello all, I bought this car with the handles shaved. the look is very clean in my own opinion. the doors are pretty clean, NO RUST! there are a few small dings, and where the handles were shaved some small cracks have appeared. I am looking to trade for some clean doors preferably the same color. if anyone has any interest in trading please let me know? thanks. Chris K.

Got the items then my p5 sold Spacers 50 shipped new in the u.s 626 mani 65 shipped in the u.s Pm me if interested

I am selling two full sets (four mats each) of floor mats for a Mazda 3. They were in the car for 43K miles, so wear is very minimal. One set is the stock Black Carpet and the other is a set of Genuine Mazda Rubber/Winter Floor Mats. Both in great condition. Looking for $50/set or $90 for both sets, plus shipping.

1996 CLEAN Mazda Miata Turbo WILL NOT PART OUT DO NOT ASK!!!! 1996 Mazda Miata C package. I DO NOT HAVE to sell, so no low balls and i'm firm on price. Asking $6500 Specs: 1996 Mazda Miata C-Package (Kelly Blue Books at ($4400) 85000 miles 5 spd Tan leather interior and top (no leaks and zip out plastic rear window) Cold A/C and working heat Car needs tires, that's it. Build: Racing Beat Type II bumper 94-95 Flyin Miata Turbo II with Link ECU (226 hp at 15lbs of boost on a rough tune) ($5000 system) Flyin Miata Turbo back exhaust Enthuza Test pipe Flyin Miata v-maxx coilovers with less than 1000 miles on them Boss Frog Dual Hoop roll bar AEM Wide band UEGO Custom Retrofix Lighting Bixenon projector headlights HID projector fog...

CX-5 17" OEM RIMS + TIRES(8K) pickup only! great condition cx5 rims + tires taken off my car after 8k. Pickup only please, thank you very much!! List Date: 8/15/2013 For more info, click here to view the original listing: CX-5 17" OEM RIMS + TIRES(8K) pickup only! -------------------------------------- On Sale For: $800 + $0 Shipping --------------------------------------

Prices dont include shipping, with that in mind, please dont ask me for shipping quotes unless you have money to purchase the item.. All parts are in good condition and just selling because I no longer own the MSP. For more info on an item, or to buy PM me..( Now taking offers) MSP OEM Intake Manifold assembly with sensors(only missing injectors) ready for port and polish wit no down time:150.00 or B/O