Mazdas247 Marketplace

Mazdaspeed Protege Lower Grille Pretty simple; just a clean, stock, lower grille for a 2003 Mazdaspeed Protege. Email me with any questions. Thanks for looking! List Date: 10/21/2013 For more info, click here to view the original listing: Mazdaspeed Protege Lower Grille -------------------------------------- Item Has Been Sold. --------------------------------------

Mazdaspeed Protege Stock Hot + Cold Pipes (with stock BPV) and Stock Intake Set-up Hey there! I'm selling the stock piping (with stock BPV included) taken off of my 2003 Mazdaspeed Protege. The reason they were taken off the vehicle is because I replaced my stock piping with aluminum hard pipes. Other than a couple clamps and screws missing (used some of them to install my new piping) there is nothing wrong with them; they work perfect. Thanks a bunch for looking! List Date: 10/20/2013 For more info, click here to view the original listing: Mazdaspeed Protege Stock Hot + Cold Pipes (with stock BPV) and Stock Intake Set-up -------------------------------------- On Sale For: $130 + $0 Shipping --------------------------------------

Selling my WORK RS Type (Closed End) Black Lug Nuts. Missing 1 Lug, but it can be purchased for $7.50 @ http://www.workwheelsonline.com/work-rs-type-closed-end-black-replacement-lug-nut.html No fading, cross threading, etc. Perfect set other than 1 missing lug. There are 4 Locks, 1 key, and 15 Lugs They came off my OLD MS3 and have been in my toolbox since 2010. I drive an STI so these wont fit :( $75 SHIPPED. SET SELLS FOR $150 NEW. My old car :) -Jeff

I have an old-style HKS 60mm oil pressure gauge (electronic) up for grabs. Purchased way back when I had a 240sx, and never installed it because the car was totaled. Never installed, everything in the pic is included. Asking $150 OBO. Buyer pays shipping. If in Canada, Interac EMT, all else, PayPal is okay but please add 2% for PayPal fees. Will ship internationally.

all black ver. 4 hks bov with flange to fit mazdaspeed 3 or mazdaspeed 6 price is obo. pm me if interested

stock msp stuff - wrx 440s - obo Everything here i want gone. im not posting prices, make a reasonable offer (include shipping from 19604 via USPS) and its yours MSP manifold uncracked and in good condition. needs studs tapped out - SOLD MSP S pipe same as manifold MSP smic MSP exhaust hangers, no tears MSP radio bezel with a few very small scratches MSP gauge cluster cover with a small hole on the left side drilled for my valet button MSP cat back exhaust (pick up only) in very good shape(oval tip) MSP egr valve - SOLD MSP stock air box with every part to install MSP heat shield - SOLD WRX 440s Aftermarket smoked tail light passenger side only MSP engine cover w/o screws to mount

Motivated to sell Got this a couple years back, need to focus on power/handling not the looks. $125 OBO shipped lower 48 any where I'm willing to split shipping Price drop $115 shipped Price drop $105 shipped 9/27/13

Please delete

JBR RSB JBR RSB, stiffens ride up tremendously. Completely eliminates understeer in most cases. Great product List Date: 8/10/2013 For more info, click here to view the original listing: JBR RSB -------------------------------------- On Sale For: $150 + $20 Shipping --------------------------------------

Cold Pipe or Turbo inlet pipe for Mazdaspeed 6 or 3. Pipe is made of polished aluminum and comes with red silicone couplings for a factory direct fit. Sounds great even with the factory turbo. List Date: 10/16/2013 For more info, click here to view the original listing: Cold Pipe or Turbo inlet pipe for Mazdaspeed 6 or 3. -------------------------------------- On Sale For: $65 + $10 Shipping --------------------------------------

Hey guys. I have an old OG orange GT-Spec rear trunk brace for sale. These are very rare and haven't been made in years. It is missing the strut tower bar but that could be made pretty easily, perhaps even using an eBay rear strut bar (for the MX-6). I've never installed this trunk brace but I did have one in my P5 (the wagon version, of course). There is a small rust spot (yay Ohio rust) on one of the arms but that will not be seen when mounted in the trunk (see pic of rust spot) $150 obo shipped in the continental US. Sorry, no shipping to Canada or international. SOLD Next is a KL47 MAF sensor from an OBD2 Mazda Millenia. I used this for my KL swap in my P5. I just cleaned it and it's ready to go. $40 shipped SOLD 5" x 8"...

MS6 OEM BOSE amp Selling an OEM BOSE amp from a buddies MS6 he sold a few years ago now. When the amp was removed, worked great - has been stored in a clean dry environment. Asking 65 bucks shipped - but am certainly open to offers. Thanks. List Date: 10/10/2013 For more info, click here to view the original listing: MS6 OEM BOSE amp -------------------------------------- On Sale For: $60 + $65 Shipping --------------------------------------

I have a good used turbo with no shaft play. Got it from work, came off of a Chevy HHR SS. I know it's not a speed turbo but I know you all can make it work to fit your needs. Has about 50k miles or so, jist need to replace wastegate cause it sticks. Asking $500 plus shipping. Pm thanks

ETS TMIC MS3 ETS TMIC for the MS3 no reasonable offer will be refused nothing wrong with it. Selling car so I need to part it out first. $595 new http://www.extremeturbosystems.com/ETS-MazdaSpeed-3-Top-Mount-Intercooler-TMIC.html List Date: 9/25/2013 For more info, click here to view the original listing: ETS TMIC MS3 -------------------------------------- On Sale For: $350 + $35 Shipping --------------------------------------

all items are obviously used all items do not include shipping stock shift knob - sold stock springs - sold stock RMM - $20 stock front and rear shocks - $20

MazdaSpeed6 stock exhaust Came off my MS6 @ 66k miles. Had to cut the mufflers off to fit it in my car as you can see. Those bolts were too rusted to get off. Other than that, it's all good. $100 + shipping for the mufflers & mid-pipe (Would rather not ship the mid pipe, though) List Date: 9/4/2013 For more info, click here to view the original listing: MazdaSpeed6 stock exhaust -------------------------------------- On Sale For: $100 + $0 Shipping --------------------------------------

This is a black leather shift boot, I bought a new one I dont need this one and am cleaning house. I want fifteen dollars for it shipped. Its in perfect condition.

2013 Mazda 2 Factory Radio Taken out of the car to install aftermarket radio at about 2k miles. http://www.partswebsite.com/mazdapartswholesale/?i=2&make=136&model=2579&year=2013&type=parts&act=new_subcategory_hp&section=123&catid=30177&subcatid=30699&fl_id=57 LOL WAT? 612.84 USD from this site. List Date: 10/8/2013 For more info, click here to view the original listing: 2013 Mazda 2 Factory Radio -------------------------------------- On Sale For: $150 + $10 Shipping --------------------------------------

(4) 17" Alloy 5 Angled Spokes I've got four 17" wheels that came on my Mazda5. Some curb damage, unmatched tires (2 summers are ok, all seasons are no good, 3 have good TPMS). *Fit Mazda5, Mazda6 vehicles. Really don't want to ship them, probably at least $300 or so. They're just taking up space, so give me an offer. List Date: 9/9/2013 For more info, click here to view the original listing: (4) 17" Alloy 5 Angled Spokes -------------------------------------- On Sale For: $144.74 + $350 Shipping --------------------------------------

Medieval front motor mount. Has 70-80 Durometer black urethane bushings. Never used. Was going to switch out my AWR's, but never got around to it. $55