Marketplace

For Sale - CP-e catted downpipe Up for sale is a CP-e Catted Downpipe. I bought it new and have used it for about 5 years. CP-e swapped out the cat under warranty about two years ago. Still solid, but decided to go with the OEM downpipe and a racepipe, for reduced noisage. I am lazy, so I prefer not to ship. I live in San Diego and am willing to meet halfway if you're relatively close. $350 List Date: 2/20/2015 Location: San Diego, CA, United States For more info, click here to view the original listing: For Sale - CP-e catted downpipe -------------------------------------- On Sale For: $360.76 (Local Pickup Only) --------------------------------------

I have 2 limited slip diff's, the first is an OE Mazdaspeed LSD. I was told that this is the latest version from Mazda, with about 20,000 miles, and the ring gear has been welded to the diff, to eliminate the factory weak point in the rivets. Comes with used bearings and races, but they still appear to be fine. Would like to get $400obo plus shipping I also have a brand new MFactory LSD. Only purchased within the last month, I installed it in my trans and found out I had another problem, so it has been installed but only has a few test drive miles on it. Will come with brand new OEM Mazda bearings and races. I also have the ability to tumble the ring gear, so if you want, I could remove and tumble polish the ring gear before...

mazda CX-5 all-weather floor mats Front and rear mazda cx5 rubber all weather floor mats. Only used for 3 days. List Date: 3/8/2014 Location: New Paltz, NY, United States For more info, click here to view the original listing: mazda CX-5 all-weather floor mats -------------------------------------- On Sale For: $59.00 (Local Pickup Only) --------------------------------------

2006 Mazdaspeed 6 2006 Turbocharged 274-hp four-cylinder Six-speed manual Mazdaspeed 274-hp, 2.3-liter I-4 Transmission 6-speed manual w/OD Mods are: coilovers Wheels Cold air intake Bov Motor cold start sound clip https://www.youtube.com/watch?v=DojMgCXxk2k&feature=youtu.be List Date: 2/11/2015 Location: Washington, DC, United States For more info, click here to view the original listing: 2006 Mazdaspeed 6 -------------------------------------- On Sale For: $6,500.00 (Local Pickup Only) --------------------------------------

Sold or trashed.

Alright Ladies and Gents, I have here a set of JIC MAGIC FLT -A2 16 way fully adjustable coilovers for all FSDE /BJ platform 2002- 2003 for sale. (protege/protege5) from what i know they have been discontinued, but they still support maintenance and repair on them. The Good : I only ran these set for a good 8k -10k miles The Bad : i blew the right front passenger side. after getting the right rear ones back for maintenance and repair from JIC MAGIC in their warehouse in south california. it will cost $400-600 to get them serviced (depending on what service is needed) Asking Price : These go for 2-3k depending where you get them with shipping i am asking $600.00 + shipping or shipped depending on freight fee. ill take a hit on the...

Mazda CX5 cup holder trim Used but in excellent condition cup holder trim for the CX5. No scratches or marks, color matched to the silver accents of the interior. To install use a heat gun or hair dryer to the 3m tape and apply pressure for about 30 seconds, that's it. Firm on price, it's half of cost I paid List Date: 8/26/2014 For more info, click here to view the original listing: Mazda CX5 cup holder trim -------------------------------------- On Sale For: $15.61 --------------------------------------

Sold!! BP engine completely cleaned out and rebuilt about 7 years ago but never used. GTX oil pump, MSBP installed, crank shaft balanced, GTX rods, Wiseco 10.5:1 pistons, slightly bored for new pistons, 1mm oversized stainless steel valves, head rebuilt / port and polished / port matched, Miata exintake cam mod with adjustable cam gears, special modified intake by BPT323, intake coolant bypass, powdercoated valve cover, Miata CAS, 4-2-1 exhaust manifold, fidanza aluminum flywheel installed never used, centerforce dual friction clutch bought used with a few hundred miles on it: $500 Front subframe from an mx-3 can be used on a protg also, its modified to also be able to be used with an AWD trans, it comes with upgraded control arm...

Here selling a SSAFC V2 with datalogging. It was used for less than six months and practically brand new. Looking to get $315 OBO1c727.jpg.html][/URL]

Clutch, flywheel, turbosmart, fuel pump, TB, mani, MAF, inlet, MDCC, EVO lugs For sale are some used items and brand new items... The prices are shipped and fees are included.. New stuff: Fidanza flywheel $275 shipped Spec 2+ flywheel and bearings $475 shipped Hi tuned 3" turbo inlet $100 shipped Used stuff OEM throttle body $75 shipped OEM intake mani $200 shipped OEM fuel pump 56k $175 shipped Matt Damon catch can $75 shipped MAF sensor $55 shipped Turbosmart hybrid bov $175 shipped EVO x lugs(needed for lots of rims) $45 shipped Markspd6@gmail.com for PayPal and offers.. List Date: 8/27/2014 For more info, click here to view the original listing: Clutch, flywheel, turbosmart, fuel pump, TB, mani, MAF, inlet, MDCC, EVO...

Ms6 interior(glove box, trim pieces etc) Ok, still selling stuff to raise money for my main build... I haven't had a chance to check prices, so ill be updating. If you see anything you need or even other stuff lemme know, I'm doing a full interior part out.. So I also have door cards, stereo, speakers, amp. Lots more... Items in pic: Glove box Redline armrest(installed) sold! ebrake cover shifter(reg height) red trim SOLD! Cup holder full and working and mint SOLD Shift surround trim with ashtray and light sold Full complete (3)set of rear seat belts, $60 Aftermarket exhaust SOLD! ATP cel trick $25 new never used.. Ms6 ac controls(not interchangeable with reg 6) $80 OEM Inlet $15 OEM Inlet with brass nipple $25 Oem reg 6 airbags(not...

This is everything I have left parts wise. Looking to sell all of it if anyone needs it. Shipped items are to 48 states only. Canada Alaska Hawaii extra..... Msp ecu 120 shipped MSP gauge cluster 100 shipped Rear seat skins 100 shipped Engine harness in good shape 100 shipped Center bezal 45 shipped speakers 100 shiped w/tweeters Mirrors are 40 each Rear lip parts...guy cut middle section out for a different look 80 shipped pass side skirt $? Mazdaspeed door sills....clips broken 50 shipped see pics Turn sig/wiper tree 75 shipped Anything not listed make me an offer....shipping will be 10-30$ depending on the size so take that into account.

195/50R15 Hankook RS3 I have one Hankook RS3 size 195/50R15. I was buying them one at a time but found a good deal on some Rivals so I went with those. Tire has never been mounted. List Date: 2/3/2015 For more info, click here to view the original listing: 195/50R15 Hankook RS3 -------------------------------------- On Sale For: $115.00 --------------------------------------

For sale, gauge cluster from a Protege5 and ECU. Both with less than 52000 miles. Gauge Cluster: $85 shipped ECU: $75 shipped Accepting best offers. Gauge Cluster: ECU:

this turbo has about 25k on it and was absolutely wonderful pulls extremely hard, nothing wrong with it no shaft play at all im just going bigger! i figure 650 is a fair asking price for this turbo including s pipe and a protege garage stainless manifold that is brand new never installed, i will sell seperately but its not going to drop the price of the turbo much i still want 550 for the turbo alone but would love to sell as a package, wont come with the water or oil lines. once again i loved this turbo, i am deploying in a few weeks and i know this will go fast but i figured i would post it up here first but if it doesnt sell soon then i will post it up on a 240sx forum or something, so act quick and give me some offers.[/IMG] [/IMG]

mazda cx5 cargo net cx5 cargo net ,got two as gift.Not oem,but close! List Date: 12/5/2013 For more info, click here to view the original listing: mazda cx5 cargo net -------------------------------------- On Sale For: $21.03 + $0 Shipping --------------------------------------

Selling the mount pictured. Works with cell phones or other devices. I bought it brand new a while back and never got around to installing it. Instructions and screws are included. Designed for 1999-2003 Protege and 2002-2003 Protege 5. I live in Winnipeg MB. I can ship it to the U.S. for $25 all in as I am travelling there in both early Feb and early Mar 2015. I can send more pictures if required.

AEM EMS 1710 B series engines This is the AEM EMS 1710 I never actually got a chance to use it, tested it once on a friends Miata and it worked. It should work in any mazda running a B series engine I will ship to anywhere in Canada and USA List Date: 1/25/2015 For more info, click here to view the original listing: AEM EMS 1710 B series engines -------------------------------------- On Sale For: $442.43 --------------------------------------

"BMW Style" LED tail lights '13 and up LED tail lights. Used for about a week. I will update with install pictures. $350 shipped List Date: 1/23/2015 For more info, click here to view the original listing: "BMW Style" LED tail lights -------------------------------------- On Sale For: $350.00 --------------------------------------

I found a few more parts laying around in my garage for my MSP, Everything is off or was for a 2003.5. First up: Ive got a titanium grey painted motor cover, Im asking 50 shipped for this. Its in overall good shape Driveworks tie rod end DW-es3197rl, Never used. 15 shipped Rear sway bar endlinks and bushing, Was told these fit MP3s. 22 shipped for these Lastly ive got a a factory pair of MSP 2003.5 headlights, They are in overall good shape with no broken tabs. They do have hazing on the lens though. 70 shipped for these.