Marketplace

Have a set of EBC Green pads, BNIB. I unfortunately didn't realize these don't fit the larger calipers of the GT-R so if anyone wants them, just cover the USPS shipping and they're all yours. These are front brake pads.

2003 Mazda Protege Mazdaspeed Selling this blue protege due to rust damage in rear. The car runs and interior has all parts. Trunk area has some damage along with bumper. I can send pictures to those interested in purchasing the car. I don’t want to let it go but if someone with time and means to fix it will get a great car out of it.

My loss your gain, water pump failure this week gave a reason to pull the last of my parts that have been on the car. I won’t split anything it’s a package deal everything goes for $300 obo plus shipping parts are located in Chicago area 626 Valve cover w/ coil packs (cut for access to Cam Gears) Hydra Adjustable Can Gears w/spacer and bolt (tool to hold gears in place to do swap) Straight thermostat housing w/OBX lower hose

Brand new in the box. Never Used. $100 shipped

Mint Condition Used for 1 month. $150 shipped

New never installed front sway bar I bought for 2007 Mazda 3. H&R 33228 part number. $100 plus shipping.

Side rails and cross bars. $150 Currently painted black, perhaps could use a refreshening. Pics available. Phoenix area

CURT Class 2 Trailer Hitch - Model 12170 I had this installed on my car for about a month and used it one time but then I ended up getting a good deal on a Class 3 hitch. It's in excellent condition and there's barely any wear, even in the receiver. I reused my old hardware, so this includes the new unopened hardware kit that came with my new one. It looks like these fit CX-5s from 2013 all the way to 2021. Asking $75 obo. Located in Midland, MI but I work in Saginaw and I'm also often in Vassar.

I bought new wheels and tires for my CX-5, so looking to sell my old original ones. These are off a 2015 Mazda CX-5 Touring. Wheels/Rims: These are in excellent condition: there's no curb rash or bends. I plastidipped them with a gunmetal grey, but it easily peels off if you don't like it and the original paint underneath is in excellent condition. These are 17x7 and the bolt pattern 5x114.3 or 5x4.5 with a offset of +50 and center bore of 67.1mm which will also fit many Japanese vehicles like Toyotas, Nissans, Hondas, some Subarus, Fords and more. Tires: 225/65/17 Primewell Valera Touring that have a little bit of tread left. Hold air with no issues. These are balanced and ride very smooth. Note that 2015s don't have the in-tire...

2002 Mazda Protege 5 - Sport Wagon 5 speed Manual --- $500 OBO This car has got a massive oil leak on the crankcase and has a broken alternator from all the oil spraying up. It runs great despite the oil leak and blown alternator. This is more of a parts car or project car for someone. I have taken it as far as I can as my little sleeper car and need to move on. Miles : 211,000 - Cold Air intake - Race Radiator (all aluminum) - LED Lights - HID Fog Lights - New Stereo BLUETOOTH CD PLAYER - New STOCK Wheels - TIRES - New Road Hugger GT + 195/50/R16 - Blizzak Winter Tires set 195/50/R16 - Clean interior - Racing Pedals / Clean Dash and Tachs - New Bumpers front and Back - Fat Matted - Rear seats ripped out - Clean - no rust - great car...

Husky Front All-weather Mats: excellent fit and condition, 1 year old, fits 2nd gen CX-5 https://www.amazon.com/dp/B07D1HMPSF/

Brand new. Boxed and ready to ship $60 shipped in continental US.

Hello all! This is my first and probably my only post. I will be selling my 2016 cx-5 and am looking to sell some aftermarket parts. These include: Rubber mat for rear hatch Headlight "eyebrows" strut tower brace interior floor brace-SOLD trunk/rear brace taillight assembly-SOLD I paid over $1500 for all of this but would like to get rid of it. I am located in the Nashville, TN area and would like to meet someone so I don't have to ship it. As for price... considering that I'm getting rid of the car, pretty much name your price. I am looking to sell of all of this to one person and will consider cheaper offers if I can sell it to one person. Thank you!

Black Flow One Race spec wheels. Came off from 2021 CX5 GT-R 19x8.5 ET45 With continental DWS06 245X50X19 tires Comes with TPMS and black Gorilla lug nuts. Wheels are ceramic coated with GYEON. Wheels and tires in excellent condition have less than 500 miles on it no patch or plugs. Asking $1500 or OBO. Pick up only CHICAGO Burbs.

BNIB never used. I bought two pairs back when these were offered as a group buy. All my Mazdas are gone so I no longer need these. I only pulled out the right fog for the pictures. The left is still wrapped in original packaging. $120 shipped CONUS Fits the following Mazda vehicles 2 2010-2015 3 2004-2015 6 2006-2008, 2011-2014 CX-5 2013-2015 CX-7 2007-2009 CX-9 2013 Miata MX-5 2006-2015 MPV 2004-2006 RX-8 2004-2009

I just received my JDM rear headrest for my 22 CX5 but they came in the wrong trim. Never used. I have decided to sell them since shipping them back to Japan will be expensive. I'm in 90020. Local pick-up welcomed. $60 plus shipping. They're black vinyl not leather and they have bright green stitching.

Hi there, I have the two OEM pieces (left and right) of chrome lower trim from my 2020 CX5 that were removed when I swapped them out for the darker chrome ones from a different trim. They are in like new condition as they were only on the vehicle for a few weeks (and were wrapped in PPF during that time) before being swapped out. $30 bucks each or both for $50 (Canadian). These are perfect to wrap before installing if you want to black out your chrome in the grill. Buyer pays for shipping from Nova Scotia, Canada.

A random assortment of parts I found. Local pick up in the Clifton NJ area. These parts were off of a 2007 Mazdaspeed3 OEM intercooler OEM diverted valve OEM rear camber arms OEM end links Turbo inlet from turbo xs? Not sure what that thing is. OEM oil filter housing OEM shifter OEM battery tie down? OEM passenger side engine mount

Have a brand new in box AutoExe 4-2-1 header that I’m told was the last one available from AutoExe Japan. Purchased from Mazmart in Atlanta, GA and it came directly from AutoExe Japan. I had it ceramic coated in performa-chrome for a long lasting finish. One of the most baller pieces you can own for the protege. Motivated to sell, open to offers. $1000 obo

Had some extra fog lights I was hoarding to make a light bar. Need a house more then another project. All lenses have some amount sand blasting, but no stone holes or cracks. Top Row, Left to right- #1- Clean, bright lens, minimal blasting. Asking $60. #2- Slight blasting. Asking $45. #3- Slight blasting. Asking $45. Bottom Row, Left to right- #4- Wrong screw installed, slight blasting. Asking $30. #5- Broken stud on back, slight blasting. Asking $30. #6- Flaking blemish at the bottom of the lens, medium bright glass. Asking $30. Buyer pays actual shipping and will ship singles as USPS padded flat rate, and pairs/more in USPS medium flat rate. Feedback: https://www.ebay.com/fdbk/feedback_profile/johntec