Marketplace

I have a shock sensor for the stock alarm and a cap that hides the bolts inside the cabin. You pay to have it mailed to you. **********************************

2016 CX-5 OEM Floor Mats (BNIB) 2016 CX-5 OEM Floor Mats (BNIB) - came with the car and upgraded to All-Season Mats - charcoal black in color - 4 pc (2 fronts & 2 rears) - see actual pics below - if no one local wants them, I'll consider shipping - yes, I copied text from another listing :-) You'd have to pay $78 for them online: http://mazdagear.com/floormat-carpet---cx-5.aspx List Date: 3/23/2015 Location: Seattle, WA, United States For more info, click here to view the original listing: 2016 CX-5 OEM Floor Mats (BNIB) -------------------------------------- On Sale For: $50.00 (Local Pickup Only) --------------------------------------

I'm seeking a ECU for my SP20 P5 2002 FSAM FSAM 18 881A E6T51775H

This car is fully functional, except that the passenger rear strut mount is completely rusted out and it would cost more to repair than the car is worth. 120,000 miles, 5-speed manual, silver body, 1.6l engine, grey clothe/plastic interior. The Good: Zero problems with the drive train, oil changed every 5000 miles with Mobil 1 High mileage oil. The interior, minus the headliner above the driver side window and the drivers seat, is in very good condition. Brand new 205/50R15 Hankook Ventus V2 tires on aluminum allow wheels. Brand new front disk brake rotors and pads. Brand new belts. Water pump and timing chain replaced at 100,000 miles. Aftermarket single Din Sony receiver. The Bad: Was a northern car, so the under body is very rusty...

These Are plug and play for 3rd gen Proteges. Just the wiper stalk... $45 shipped. Text 9173454448

Came off a 2003 protege5 with 30k. $40 shipped USA Text 9173454448

New Front and Middle lower Braces for 08-12 Mazda 6 BRAND NEW set of Lower Front and Middle braces for the 08-12 Mazda 6 List Date: 3/17/2016 For more info, click here to view the original listing: New Front and Middle lower Braces for 08-12 Mazda 6 -------------------------------------- On Sale For: $99.00 --------------------------------------

Silver Body Cloth Seats 202,000 miles Small amounts of rust, paint wear, body is fair. Black Rims 16" Alloy 4 Continental ContiProContact almost like new tires, 2 other brand tires Some spray paints and Bondo 4 Brand New Not yet installed Cross-Drilled Slotted Rotors. I tried to do the job and it was hell in the cold and the parts store gave me wrong rotors and I put the old ones back on, but haven't installed these yet. The lines need bleeding, but does drive. Wagner Thermo Quiet Pads, all around. The Steering wheel shakes on the highway. Alignment is off to the left a little. But drives confidently smooth and zippy in the city. Fun car. I guess its not the right one for my girlfriend. I just want $1150 firm, no less, no hassles...

Might need some some front suspension work. Needs alignment & wheel balance. Drives fine under 50mph. Text [removed] for pics.

SOLD - NOW I NEED TO FIGURE OUT HOW TO REMOVE THIS POST. any help would be appreciated.... MAZDA OEM 99-03 Protege-Engine Torque Strut Mount BJ0N3906YE It is OEM (not "like" OEM) and still bagged/sealed in original bag with Mazda part label on. This is the side mount (# 3) that you can inspect from above the engine so easy to figure out if it's in need in need of replacement. Please email with queries. Is on ebay for $85 with free shipping to continental USA. Fits a number of vehicles I believe. Check compatible part numbers for yourself (or ask for help). 1st time I've done this on this site so if I've goofed in some way please let me know. OK, photo etc to be posted in next 2 days. Apologies and thanks for feedback. eBay...

$60 shipped obo I had originally thought my OEM axle was going bad, so I ordered a pair of front left and right axles. The front axle matched my junked front driver's side axle that I still had in my garage but the one on the car ended up not being bad. So this sat in storage for the time when it did need to be replaced. Car was traded in last weekend so I no longer need the axle. I'm confident it will fit the MSP because I did the research on it and the cross reference appears to match. Here are the specs.. Here's the cross reference by the company that makes it.. I paid $68.27 shipped for this on 5/15/2014 and just looking to get most of my money back.

4 Rota Boost 17" Wheels with 235/40ZR17 Nexen N7000 Series tires. Wheel width 7.5", Bolt pattern 5 x 114.3, offset 45mm, hub bore 73 mm. Less than 50 miles on them. $800.00 OBO.

DBA 4000 Series Front and Rear Drilled/Slotted Rotors. Less than 50 miles. Make a reasonable offer.

I was rear-ended in my p5 and it was declared totaled. I have the stealth subwoofer box and speaker I made. I even mounted the interior light to it with some extension wire so you don't lose the light. it was my first attempt at fiber glassing, so it is not perfect. it does fit tightly and sounds great. I was thinking $50 even though the speaker itself was over 50. I would rather some get some use out of it and I am thinking shipping could be pricey. Atlanta local would be the best. option.

All you need is a length of square bar and your ready to go! Used only once, my loss your gain. Shipping included! 150$ IMG_8866 by driverfound337, on Flickr IMG_8867 by driverfound337, on Flickr IMG_8868 by driverfound337, on Flickr

All new - In Box. Mounted but never used. Full Set Up - $200 including shippingp

RCA adapter for pioneer ip bus head units with rca cord with jack 30$ shipped lower 48 **********************************

Turbo, ECU, Intake and Exhaust mani's, MSP pedals, MSP door sils, Sway Bar, Springs All prices are OBO and shipped. Let me know. Progress rear sway bar with end links - SOLD SAMCO upper and lower rad hoses, no mid - SOLD Celica side markers - SOLD Short shifter (like B&M) - SOLD P5 - Fog deletes - SOLD MSP Turbo w/DP - no play, spins free, but PO said it smoked and burnt oil. I found the oil return line melted to it so can't say for sure on this. - SOLD MSP ECU - SOLD MSP pedals (I have all 3 but the gas is on the car at the moment) Worn but decent - SOLD MSP valve cover painted - SOLD MSP heat shield - SOLD MSP exhaust manifold - SOLD MSP j pipe - SOLD MSP oil and coolant lines - SOLD MSP door sills - SOLD Wastegate actuator - SOLD...

FS are two never used parts i was planing to put on my 02 mp5 before it broke down. never used and barely opened. Forza catback exhaust system, i believe 2.5" piping to a 5" tip. I also have a brand new Injen RD series cold air intake. comes in original box and everything. will sell for 400$ for both, or 200$ each. photos : http://imgur.com/a/0hclS

2003.5 mazdaspeed protege. 100k body miles! Car has no motor but does have the limited slip diff transmission and factory upgraded turbo car axles still installed. Also has most of the interior and some other parts( na header, part of an apexi exhaust, radiator.. All airbags are good.. Still has mazdaspeed door sills and cluster.. Body is rust free and pretty good shape. Also has short throw shifter.. what you see is what you get! I bought car for the engine for my other one.. I do have the hood as well! $900 or trade for a 125cc dirt bike to or 350-400 racing atv Clean and clear title in hand!