Marketplace

hey there everyone. today i have forsale a extra headgasket i had laying around its a cometic headgaskit 84mm .040.. also i have a mazdaspeed oil cap , and one that says protege 5. i also have two vacuum blocks they are both anadized. i have 1 black one and one blue 1 they both have 4 outlets. i will show a picture of it mounted. p.m me for prices on all parts.. i will post pics when i get home im at work now

Ive Got some random stuff left over and laying around. Auto Meter A/f gauge 30 shipped Stock springs 50 + shipping msp strut bar painted, with stock feet 50+ shipping stock turbo manifold its cracked and one of the studs broke off in the bottom part where it connects to the exhaust. good for someone who wanted to fix it. Just hate throwing stuff like this out. obo + shipping tokicos 200 plus shipping and tein springs 150 plus shipping obo random stuff: stock IC an pipesSOLD, airbox, a few grills(both abit busted) sub enclosure, rez tank, bottom mesh, heat shield, coil packs all "make an offer" moved to a smaller house and dont have the space to rat pack...lower mesh sold http://img204.imageshack.us/img204/6317/001bv.jpg...

Part # 17-620 (a combination of 17-622 and 17-621) and syncro part # 17-265 Brand new in original packaging. The gear doesn't fit in my 95 prove tranny that's on my msp. Asking $130 shipped or best offer

I have a 2001 626 intake manifold up for sale. This is the federal emissions version which comes with the Vtcs flaps for emissions purposes. I removed them and drilled and tapped the hole closed with a pipe fitting guaranteed to be leak free. The intake manifold also comes with the proper egr pipe and an egr valve. Asking $100 + shipping Or make offer.

refer to top. shipped to 48304.

Hey everyone. THIS IS NOT FOR SALE YET, but I am considering selling my Perrin JBE and just wanted to see if anyone would be possibly interested. Runs J-pipe back, 3" mandrel bent, no cats, straight through muffler w/4" tip, awesome sound. I gotta get something catted, and am debating getting a Vibrant and selling this or modding the midpipe with a vibrant or magnaflow hi-flo cat.

so its time to do some maintainence to the car, replace sway bar bushings. while i had everything apart to get a better idea of what is good and bad i noticed the rear sway bar had a good amount of wear and tear the the bushing connection. is the sway bar a solid member or is it hollow? should i replace it? i was thinking about putting the AWR rear sway bar kit in as an upgrade. but i also thought i would stop here from and see if anyone has anything they would like to sell. im also looking for a nice boost gauge and maybe a wide band anybody got anything for sale? thanks everyone.

looking for all 4 billet aluminum mounts or Driver & passenger mounts aftermarket only.. or any vendor that has in stock.. already have AWR ft and rear but looking for the billet aluminum ones. lmk pls..

For sale is a Mazda B6T (Turbo) engine assembly. Pulled from a salvaged 1991 Mercury Capri XR2 with 52k. Car had light frontal collision damage, but motor appears to be unscathed. It's been in storage for least 10 years, so it will need to be gone through. Motor is missing the throttle body on the upper air intake. I'm asking 275.00 cash (firm). Buyer must pickup engine, which is located near Greenfield Indiana (outskirts of Indianapolis). I also have [other parts but will need to post proper pics]

ok, well I really didn't want to part with this but I need the money, and I wanted to sell this quickly so I am keeping it separate from my part out. I am only shipping to the 48 US states for this thread, just to keep things simple. Sorry, I just want this stuff sold fast MY paypal is Firerblazer360@cs.com The SMIC has about.. 10k miles on it, if that, it was on my 2 msps that I had for about 2 years total, but they were not driven in the winter and part of the summer for one of the years, for a total of about 5 months. It is in great condition, I cleaned my engine bay every couple weeks. I am looking for $325 SOLD I am also selling the Radiator Fan that I took out when I did the FMIC install (switched for a slim fan) MAKE...

hey guys i gotta 2003 mazdaspeed protege sitting in my garage so its about that time i put it in the market its got everything but an engine because it overheated but it hasnt been pulled out mazdaspeed protege 2003 blown engine and no radio dont have 1800 dollars for an engine so thats why i have to sell it the car is gonna be put up on craigslist ebay and this forum for $3500 OBO! its black and has the racingheart silver rims and all the turbo acessories that come with the car also have a phantom boost guage and a phantom air/feul ratio guage jbencosme34@hotmail.com plz feel free to email me cause im always checking my email for more info and pics thank you

I am looking for a stocker MSP exhaust mani.....my Thunder crapped out on me in less than 6 months. Cracked right down the center weld almost an 1/8 of an inch for like 3 inches!! I figured another Thunder mani would crap out on me again so I'll just take a stock mani. Thanks!

Like the title says, i need a MSP radiator, new or used. Let me know what you have.

FS: Racing Hart's, Unichip, Sub/Amp rack >>>

thi isnt the actual f.s thread just wondering if anyone is interested on the oem 03 msp fog lights. I am on my phone so i will make a official thread if there is any interest.lights are on the car right now i am doing a fmic set up from what i hear the fog lights interfere with my pipe routing so if any interest shot me a pm or leave a trhead message they dnt have a set price so they are obo.

wtb reducers for maf relocation if u got them with the clamps that would be good if not ok dnt really wnt to spend that much the piping killed me i got 2.5 piping so i guess 3-2.5 will do or can i just use a 3 inch coupler

Looking for a gently used to new OEM strut tower brace.

Ive tryed to to sell before but i couldn't part with her, but now i need to sell... i will part out if needed but id rather not.. up for sale is my 2003.5 MSp it was fully built by tbk performance in Miami,FL. it has 660cc injectors,tial waste-gate, walbro 255fp, act stage 3 clutch, complete hi boost turbo setup, cp pistons and rods, complete turbo back exhaust, greddy sp2 tip. exterior- two-tone paint job blk/silver, buddy club 2 body kit, 18" konig tuner2 rims.. problems-i had a haltech e6x installed but i sold it, the car is missing the front bumper and there is a clicking noise in the tranny when the clutch is not engaged. besides that its ready to go.. car was built to be 400Whp.. most importantly i am selling the car for who...

SOLD

35.00$ obo for fuel door