Marketplace

Pulled these out before i traded in my car. Not sure if i am allowed to post to the listing, if not, ill change it. I just don't want to have to put these in the trash can, i have no use for them https://www.ebay.com/itm/273338554447?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

Selling Haltech E6x with PnP Harness Already Wired. $500 Had to sell my MSP due to moving so I'm selling my Haltech that was never installed. All you get is what you see. I don't have the software CD (get it from the Haltech site) or anything else that may have gone with it. Purchased about 5 years ago from that guy down in Texas that is/was a great Protg tuner who also wired the PnP harness. While it *should* work, I don't have a way to verify it so caveat emptor. Not sure if there's any demand for these anymore, but figure I might as well see if this can go to a good home since I had to take a bath on my Protg before I could finish her. :(

Earlier this year my P5 died in a collision and has since been replaced with a Mazda 3 HB. I have a brand new, never installed, still in the packaging Canadian EGR valve conversion kit. $100 for the EGR valve plus shipping. I also have a bunch of Ecogard S4610 oil filters, these are technically for the 626, but fit the P5 and are larger and have more capacity than the standard P5 filters.

Hello fellas, After removing these and replacing them with the sleek foglight deletes, they've been sitting and taking up space. Each foglight features little chips from rocks and debris, with one featuring a hairline crack (not delicate or loose). There's a small bit of overspray on them thanks to the Maaco fellas that resprayed my car for cheap before I owned it. Pigtails are clean, wires are in good condition. Both foglights will come with the nuts they mounted onto the bumper with. They always turned on and off when I wanted them too; don't know how old the bulbs are. Ebay wants shitloads for these (140/Pair), and offers on the facebook group Mazda Protege Parts tend to be very high (current posting for a pair is 100 bucks)...

I bought this from a part out with ~30k on it over 10 years ago. I sold my P5 before installing it and have had it in climate controlled storage since I bought it. I'm trying to get ready to move and would be happy to see this go to somebody else. I'm guessing $300 shipped is a fair price, or $250 picked up in case there's somebody local on here.

Cleaning out the garage. Free OEM Mazda Protege exhaust system, from the catalytic converter back (pipe and muffler). Upgraded my exhaust and trying to make room. Nothing wrong with it. No holes. Should bolt right on to any Protege with 2.0 engine. Might fit the 1.8. it will fit the Protege5 but it will be a bit longer (2-3 inches). Located in San Diego.

I have several items I am selling. All of the items are NEW genuine Mazda parts that will fit 2016-2017 Mazda CX9. PayPal is accepted. Update: Shipping is free. TK78-V4-600 FOG LIGHTS--TK49-66-122--FOG LIGHT SWITCH => $180 TK4951RA0B -- R - PASSENGERS SIDE DOOR GARNISH => $190 TK4951RD0B -- L- DRIVERS SIDE DOOR GARNISH => $180

FS9N-18881-C. This is not a reflash, it is the genuine original. I had one in my car, and it is hands down one of the best mods I ever did. It smooths out the power band, the engine pulls harder and it makes an even bigger difference as you add more mods. The P5 should have come with one of these from the factory! It will run on any 01-03 Protege/Protege5 with the 2.0L motor and a manual transmission (except the Mazdaspeed Protege), and 91 octane or higher is necessary to get the full performance. I'm happy to give installation instructions (it's easy to install) or answer any questions, but please ask prior to purchase. Paypal: JonathanSGroves@gmail.com $OLD!!!!!

Medieval Light Weight Crank Pulley Custom SS 3inch Down Pipe (It fits with AWR oil pan) MSP Stock Fuel Injectors I am not on the here often so bare with me if I do not respond promptly... Make an offer!

Part No. FSY1203009U - $95 shipped I sold my Proteges so I no longer need this spare part. To add more credibility I am maxchao on eBay. Shipping from CA (SF Bay Area, pick up also welcome)

New in the box F series LSD F045-27-190B(no ring gear) and a F series transmission output shaft F5D4-17-301 for the 4.388 ratio ring gear. 400.00 located in socal.

It's time for me to let these fancy items go to a new owner. Asking: $150 for the bundle of items Shipping: around $25 shipping to any of the lower 48 United States. Total price: $175 I am not willing to separate out the items for sale. Bundle deal. Firm total price. Further destinations/international will be considered for a higher shipping fee. The mazda brand OEM brackets are designed to properly secure the Yakima Raptor bike mount to the Proteg5 roof rack's unique profile. You can set them towards the front enough to allow full access to the hatch after dismounting bike(s). I was able to mount road and mountain bikes, a 29er bike with fat knobby tires and a BMX with 20 inch wheels. The jaws gently but firmly hold the bike upright...

Factory p5 roof rack $200 Mazdaspeed silver cluster 63,996 miles $150 Steering column single gauge pod $50 Mazdaspeed door sills $50

Hi I am selling some TSW Mugello wheels that were on my wife's cx5 for about 2 years. They are 20x8.5 the tires have approximately 30% life left. The wheels have zero bends or curb rash and are in great condition. All four come with TSW center caps. I'm asking $800 OBO.

I had this installed in my 2008 Speed3 until I sold it in 2016. It's just been sitting in a closet since then. It's in good condition and comes with a 2/3 bottle of filter cleaner and nearly full bottle of filter oil, both of which came with the intake. I'm in NE Portland, and am willing to meet you somewhere in town or ship if needed (you pay cost of shipping).

Enkei SC05 SBC finish w/ Bridgestone Potenza RE760 Sport tires Enkei SC05 18x7.5 5x114.3 50mm offset SBC (Special Brilliant Coating) finish Bridgestone Potenza RE760 Sport 215/45R18, 5-6/32nd remaining Mazda compatible TPMS McGard Spline Drive lugs with tool Condition of wheels 9.75/10, ultra, minor scrape on one. Asking price is $1500.00 obo Ad banner shipping price is an estimate. Buyer pays shipping from 60490 @ 52#/ea.via UPS Contact 630-740-8211 Re-List Date: 2/10/2017 Thanks for looking Joe 3/15/16 Update: Adding photo of wheels on car. List Date: 2/21/2016 For more info, click here to view the original listing: Enkei SC05 18? SBC finish w/ Bridgestone Potenza RE760 Sport tires -------------------------------------- On Sale...

As the title says. Completley working lcd screen for a 03-05 Mazda6. The photo is the actual one i hooked up in my car to test and show it works. $45 plus shipping to anywhere in the US

94 MX-6 wheels with Toyo Eclipse 205-50-15 Fits 03 Protege ( I had them on for offseason use) $225 92 MX-6 wheels with Michelin Ice-X snows 195-60-15 $175 good tread on both, save your good rims in the winter with these.

1987 Mazda RX-7, 5 speed, rotary engine. $15,250. 29,435 original miles on car. Excellent condition. I HAVE LOTS OF PICS BUT THEY WILL NOT UPLOAD TO THIS SITE. IF INTERESTED, TEXT MY NUMBER BELOW. Power windows, cruise control, cold A/C. You can drive this car anywhere. All original paint, engine, window/door seals, interior. I am the 2nd owner of car and bought it from my neighbor as he was moving out of state. It was a barn find as it had setup over 12 years under a car cover in a climate controlled shop. It comes with all original paperwork from dealer. Owner paid $20,000 in 1987 @ 9% interest rate! I have installed new wheels and stereo system but I do still have the original parts including the original dry rotted 31 year old tires...

Guess it's time after nearly 16 years. Be great if it went to an enthusiast [removed]