Marketplace

Just bought MSP #35 last week... minus the sub and enclosure. Looking for just the enclosure (don't want the stock sub that will probably blow (boom06) ).

I am looking for 03 MSP fog lights with harness kit. Message me if you got, thanks.

Hey all, am looking to replace my cracked Exhaust Mani since mine has a nice crack in it. Let me know if you have on for sale along with the shipping price. Thanks! 2003.5 MSP

up for sale is a 626 intake manifold with no provisions for EGR and a cylinder head off of a 2003 fsde. The cylinder head has the cams in it, but no valvetrain. the head is very clean. The 626 manifold makes the top end pull very nicely rather than drop off like in most MSPs. Without running the EGR you will have some bogging until the car is warmed up. Ive never hooked up the EGR when I had it on the car as its fine once the car is warmed up a little bit. I am asking $150 OBO for the 626 IM I am asking $170 OBO for the 2.0l FSDE Cylinder head with Cams and Gears Here is a link to the same manifold for sale on protegegarage for $344 USD + shipping http://protegegarage.com/260-product-260.html The paint bubbled a bit in one...

I have a bunch of parts that are new Mazda factory parts except for the clutch disc. Let me know by email to morrisgreen AT comcast DOT net if you are interested in any of them. Located in Portland, Oregon. 1. Clutch throwout bearing, new, G561-16-510C, ...........SOLD. 2. Rear suspension front lateral links (2), B30P-28-620A, $25 each plus shipping. 3. Pilot ball bearing for transmission shaft into flywheel, replace this when you replace your clutch, F801-11-303, .............SOLD. 4. Used clutch disc, for MSP, LF03-16-460A; this is the friction disc, not anything else, maybe half used up, not sure if anyone even wants this but it is too good to throw it away. Make an offer... 5. Complete set of 2003 workshop manuals........ SOLD

For Sale is an ETS SMIC Upgrade with matching Polished Aluminum Hard Pipes. Price $475.00 shipped within US - Lower 48. Compare New $879.00 with Tig Weld Flange I am looking to sell these together as a set first. If I am unable to successfully sell together after 30 days, I will split them up then. Description: Side Mount Intercooler & Seamless 2.25" Aluminum Hardpiping Kit For the 2003-2003.5 MAZDASPEED Protege. Mounts in Stock location. Side Mount Intercooler Core Dimensions: 3" x 6" x 12" This bar and plate intercooler produces significant HP (approx 16-22 with this kit) increase on a stock MAZDASPEED Protege. SMIC Front SMIC Rear with Inlet and Outlet Seamless 2.25" Aluminum Hardpiping Kit Piping is of the highest...

Pliiiis i need a 2003.5 front liIip anyone!!

need some new gauges. not sure about this koso digital boost gauge that came with the car. gauge goes to some weird box under the dash and have no idea what it does. looking to get a wide bank a/f gauge as well as i am in need of a tune i believe and am going to be looking into some kind of aft control hard for a newb like myself to know what to get..

Thunder v2 - 250 shipped. has an egt probe in the utmost left runner. I have a Prosport egt gauge with only a couple of hours of use on it. Thunder + Prosport egt gauge - 300 shipped Prosport egt gauge - 85 shipped

For Sale: $140 Shipped These items have been in my possession ever since I sold my mazdaspeed protege 3 years ago. They are brand new, still in bubble wrap (never been unwrapped). They have been on the top shelf of my closet ever since and appear to be in perfect condition. I put the same two pieces in my MSP and accidentally ended up with two of each, so I still have these two brand new. Pics: Please find a link to the two original items still for sale by DGM. They are 100% carbon fiber and are very nice pieces. I simply no longer need them and am sure they will look great in someone's MSP. For what it's worth, IMHO I think the interior looks excellent with these two pieces and the entire CF set from DGM would be carbon...

Got the wing! Now i only need the mazdaspeed protege 2003.5 bumper with Lip

This exhaust is no longer available from Greddy. They only make 70MM exhausts. This is the 80MM EVOTT exhaust for 04-08 RX8s. I paid $1600 for it. It has less than 3K miles on it. Comes with gaskets (used) and hardware. Asking $750OBO w/ shipping included.

Got the msp springs and shock dust boots also the rubbers that go on top and bottom of the springs. Everything has 80k miles on them. Im not sure what the going rate is for these springs but i guess ill start around 75 plus shipping for everything.

Well I think my o2 sensor is shot and I need to get my car inspected. Looking to see if anyone has one at a good price. Dont want to pay the crazy price for a new one. This is the Primary o2 Sensor located by the heat shield. Let me know what you have and a price. I am located in Texas. Thanks!

so my bearing in 5th went the other night and fricked my whole tranny and now i am need of buying a new one.... 3 months after buying the car :( am hoping that somone on here can help find me a tranny where i dont have to pull down my pants... coming from canada it is very expensive to get any car parts specially cheaper ones for something like this... any help would be muchly appreciated thanks guys

http://carphotos.cardomain.com/ride_images/4/409/729/38520364010_large.jpg

I am looking for a set of new or used passenger side and driver side motor mounts let me know if anyone has them forsale

Up for sale is a set of clunk fix brackets. These were machined and welded with 3/16" 304 Stainless steel. It was a set I was going to put on my MSP but I ended up selling the car. It is just the brackets w/ the sway bar lock collars. Looking to get around 125.00 obo + shipping and fees. All you'd need is the hardware (bolts, nuts, etc) to get this to work. Which can easily be obtained at any hardware store. I might be able to get the bushings but would add a little more. Instructions: http://www.autoxracing.com/component...per/Itemid,18/ Alex.

I happen to aquire some money thanks to insurance so I was interested in buying an afc. Would like a new one with all accesseries but used is fine. If you happen to live in georgia or somewhere to it let me know so that maybe we can meet. Thanks.

if any one has one please let me know