Marketplace

I have a severly cracked Thunder and am looking for any stock or Mental Addiction manifold.

looking for both apillars unmodded

PRICING UPDATE!!! maf, sparco pedals, starter, engine cover, bov, walboro 255 Cleaning out my garage and heres what i got: Call or text me with any questions at 860-519-3088 My paypal is "mpphelps@hotmail.com" msp oem throttle body- $60 NOW $40 msp oem fuel rail- $30 NOW $20 msp oem fuel injectors- $65 NOW $45 msp turbo mani 02 sensor- $45 NOW $30 msp oem blow off valve- $45 NOW $30 msp oem coolant resovior- $30 NOW $20 msp oem shifter boot- $35 NOW $25 msp kenwood sirius box- $40 NOW $25 msp oem starter- $85 NOW $65 msp oem headlight bulbs- $15 NOW $10 (2) msp oem engine cover- $55 each NOW $45 EACH msp oem owners manual- $35 each NOW $20 EACh

Hey everyone this is what is left of my part out on my 2003.5 MSP: (2)MSP ENGINE COVERS- $40 plus shipping MSP SHIFT BOOT- $25 MSP BOV-$25 MSP THROTTLE BODY-$40 MSP TURBO MANIFOLD 02 SENSOR-$45 MSP RADIATOR TANK RESOVIOR-$45 MSP HEADLIGHT BULBS-$15 MSP STARTER-$65 MSP SIRRIUS BOX-$20 MSP REAR SWAY BAR BUSHINGS-$15 MSP WHEEL LOCK KIT-$20 GIVE ME A CALL AT 860-519-3088 WITH QUESTIONS

This is all i have left from my partout. Paypal address is [removed] everything is in mint condition. Msp blow off vavle-$25 plus shipping msp shift boot yellow stitching-$35 plus shipping (2)msp engine covers-$45 plus shipping msp radiator overflow tank-$25 plus shipping 02 sensor wired for mazda protege-$45 plus shipping brand new! Msp starter with 45k on it-$45 plus shipping mazda protege headlights-$15 plus shipping

Like it says I have a unichip off of a 03.5 MSP. Comes with everything except for the boost controller as it was not on the car when I bought it. $350 OBO, let me know if u have any questions.

Parts replaced from my Turbo upgrade. Quality Used Parts. Engine had 55K. Turbo system was professionally replaced by Street Concepts (Vendor). Stock parts were evaluated for potential resale - All found to be in good working condition with no issues. Turbo with WG: No shaft play or leaks. $350.00 Shipped within US (cabpatch)SOLD Stock Injectors: O-Rings and Rubber Gaskets in Great Condition. $60.00 Shipped within the US (cabpatch)SOLD Stock Cooling Fans $40.00 Shipped within the US Injen CAI - Lower Pipe Only $40.00 Shipped within the US(cabpatch)SOLD NO DIBBS. Goes to first to pay. PM me or reply to thread for Paypal payment.

Looking for an exhaust for a 03.5 speed protege. Anyone who has one that is selling, please let me know. Also, does anyone know where you can find the Turbo XS type h bov?

also for the lowski

SOLD I have sold my MSP before I recieved this item. http://www.mazdas247.com/forum/showthread.php?123792911-Thunder-MSP-Mani-V3-Group-Buy You are buying the manifold from me, but you will take my place in the group buy for this manifold. I already paid $400 shipped, so thats my asking price. So when they're done and ready to ship (eta another 1 - 2 weeks), you'll recieve it. If no one has bought it before he ships it to me, when I have it, the price will remain $400 shipped FIRM. Mods, please keep this open, even without pictures, as I have none, since I have not recieved the manifold. Pics of them are in the link to the Thunder v.3 group buy I posted. They're still in the process of being made. I've included my number up tip as a...

SMIC, Springs, Etc Here are a few useful things for sale (cheap). Stock MSP Front and Rear Springs, Rear MSP Struts, and Stock MSP SMIC/Pipes have 85,000 Miles and function properly (undercoating on springs is free). All reasonable offers incl shipping will be considered. Dibbs are 24 Hours. PM all offers and I will ship quickly! I have one SMIC pic giving me trouble. I will post it ASAP. Update: I posted it on the 3rd Post!

whats up guys. im not so sure i wannna sellll this quite yet but i have a dual ball bearing gt28rs (disco potato) (t3 flanged) paired with a hiboost turbo manifold 38mm wastegate and oil drain feed lines. the only thing missing would be the downpipe which i do not have. i was thinking of asking 1000 obo for everything together but im not too sure yet..lmk if anyone is remotely interested. the setup is at my friends shop and the only pic of it i have is a cell phone one and its just the mani and turbo. ill post that for now and post sum legit pics tomoro. thanks everyone.

So I was doing my EMS-4 install on my mp3 and I got a 12v wire in the wrong spot on the stock ecu and fried it, long story short I need an ecu to replace my fried one to control the cluster and alternator the EMS should take care of the rest. If anybody could help me out id really appreciate it. I think it could be any third gen protege or protege 5, lemme know what you guys have. Thanks!

I lowered the car and went with longer end links, but my stock ones are still fine. The inner and outer portions of the dust boots on one side of each link are separated, but not really an issue since there is no reason they would pull apart while driving. They have 70k Arizona miles on them. $10, free shipping for the links. The front bushings I just replaced in a long drawn out quest to quiet down my front end. The noises weren't the bushings, they are fine and only have about 5k miles on them and are less than a year old. $15, free shipping for the front bushings. The rear bushings have been on the car almost two years and about 12k miles and are fine, I just replaced them with urethane. $10, free shipping for the rear...

I have been searching for the last few weeks, and haven't really found what I am looking for, which is a set (the source, and return line) of stock MSP fuel lines, with the clips intact and in working condition, I know there are plenty of people around that have upgraded fuel systems so I didn't think it would be this hard, but it is... I had sold mine already from my car part out unfortunately, and now I need some for my brother's car, so if anyone has these, and can sell them for a REASONABLE price, I will first offer what I sold mine for, but let me know,I would really like to get it fixed in the next week before the big OCC meet that I have been waiting to bring his msp to for the last year, and so he can actually drive the car...

Like the title says, I'm in need of a stock coolant overflow reservoir. I'm in Fort Walton Beach right now but will pay for shipping since its not a big item. Mine cracked so if you only have the tank that's fine.

wtb vaccum block ,and front upper grill let me know what u have pm me

***Just for clarification: I do not have the whole car. I should have kept it to part out the whole thing but i had no where to store it. The only parts i have are the ones i have listed.*** So after 7 1/2 years and 163000 miles of fun i hit a deer one morning on my way to work and they totaled my baby. Sucks... So i bought a 08 Mazdaspeed 3 and now i need money for parts for that! If i find anything else ill post it up. I know i have a MSP factory kenwood radio laying around somewhere, i found the face plate, but i cant find the rest of it. If you need more detailed pics or have any questions feel free to shoot me a pm or email my phone at cvphere@gmail.com . If you want you can include your cell phone number and ill text you back...

like the title says. shoot me a PM w/ a price. thanks -Sean

Mazda 3 Online Moss/Miata Mania General parts Flyin' Miata Turbo and Supercharger kits for all miata gens. Feel free to add to the list.