Marketplace

I have upgraded to a GTX series, so I no longer need this set up. It worked perfectly, no boost creep, rock solid EWG! Parts For Sale: Injen CAI - $85 - Includes Filter cleaner If some one is interested in buying the Mani, Turbo WG and Inlet as a package, I can give you a better deal.... Send me a PM.

!!EDIT FOR SALE AND LOWER PRICES!! I've had these parts for years and will never get around to installing them. SOLD AND SHIPPED Protege Garage Full Length SRI and K&N RC5100 I tried to install this many years ago and was unsuccessful. http://forum.***************/mazdaspeed6/238149-pg-full-length-sri-kicking-my-butt.html Included is 2 pipes, 4 silicone couplers, 4 hose-clamps, and one small piece of rubber pipe that didn't fit (or I just couldn't figure it out). I have tried to backtrack what I paid for this originally via Paypal and the PG store without success. I think the blue couplers were some sort of upgrade, but can't remember. There are a few blemishes in the finish from my install attempt, but you'll never see them once...

All sold

Forge BPV - $100 (same as http://www.***************/Forge_ByPass_Valve_Replacement_MS6_MS3_CX7_p/fmdvmaz3.htm) This BPV really added the extra Ooomph to my CAI system in my 7. By the sound of the throttle release and the response time. Blue spring is included as well, inside the unit. As well as the two spacers. This was in use for about 2 years.

i am only willing to ship to the lower 48 states only!!! pick up is preferred.. Location:bridgeport,CT phone:203-338-1540 call/text *Greddy oil catch can with fittings & 1 line Sold to LE-FLO *Greddy profec B spec 2 dual stage electronic boost controller with steering wheel switch $310 shipped. *Hks turbo timer $70 shipped *Injen cold air intake with couplers/clamps/maf relocate/filter sold to CmeZz331 *msp stock headlights (corner plastic broken a bit) $100 shipped *whiteline rear springs(73112)$85 shipped (NEW) *auto extra(AXOD637) front ceramic brake pads fits proteges/fords (do your own research to make sure these will fit $20 shipped NEW *msp hard pipes/couplers/clamps/hks bov flange sold to CmeZz331 *msp smic(stock)$70...

hey guys. just came across this site and decided to post this. i bought this but never used it. everything is included that came in the box. everything is factory and nothing has been used. EVERY SINGLE THING THAT CAME IN THE BOX IS HERE. if you want pics, email me at ajw2495@yahoo.com or message me on the ebay account. here is the ebay link. if you have any questions, email me at ajw2495@yahoo.com http://www.ebay.com/itm/140714673015?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_500wt_1057 here are the pics By andiful2 at 2012-03-06 By andiful2 at 2012-03-06 By andiful2 at 2012-03-06 By andiful2 at 2012-03-06 By andiful2 at 2012-03-06 By andiful2 at 2012-03-06 By andiful2 at 2012-03-06

I have a Cobb intake and Forge bpv for sale. Both items come with everything you need and are in perfect condition, for more info email or pm. Asking 125 each

FS:18x8 et45 4x100 Rota MC (BBS LM reps) with 225/35-18 Nankang tires $425 obo Update: now $425 plus shipping or $425 picked up. 18x8 et45 4x100 Rota MC (BBS LM reps) with 225/35-18 Nankang tires $600 or best offer. A couple wheels do have some minor curb damage, and one does have a small bend. Did not feel any vibrations when driving on the highway though. One tire needs replaced as it has a damaged sidewall. It holds air, but has bubbles in the sidewall. You can buy one new matching tire for $90ish, or if you want just the wheels I will separate tires and wheels for the right price. This setup is over $1200 new. Will ship at buyers expense. I have many positive seller feedbacks on clubprotege.com, I am TRRC there. On to the pics:

IPOD Adapter - $75 - http://i.imgur.com/2Ruq8.jpg PODMAZ-R2V1 This adapter was nice to have. A direct connection (bottom port) from an IPOD is 10x better than using the headphone out jack. Opening the dash to install was easy enough. Uses the Sat button on your stereo.

I have two Mazda owner's manuals for sale. One Mazda3 and one Protege/Protege5. Everything is in very good condition (I might be the first person to even thumb through them!) and I will sell each one for $15 shipped. Here's what I have: 2005 Mazda3 Owner's Manual Warranty Information & Maintenance Booklet Original Mazda Case 2004 Mazda3 SOLD! Owner's Manual Warranty Information & Maintenance Booklet Supplement Booklet to Owner's Manual & Warranty Booklet Original Sales Information sheet with estimated MPG Original Mazda Case 2002 Mazda Protege/Protege5 - listed here Owner's Manual Warranty Information & Maintenance Booklet Supplement Booklet to Owner's Manual & Warranty Booklet Original Mazda Case 2005 Mazda3 Larger picture...

2011 CX-7 Sure TIP & Aeros Hello, I have a Sure motorsports sidewinder and aeros intake for sale, I know the sidewinder will work on all 06+ mazdaspeed vehicles and the aeros from what I can tell will only work on CX-7s these parts dont even have 1000 miles on them bought parts installed then got offered job in AK so I traded CX-7 for 2011 Rex I am looking for 160 obo shipped on Aeros And 140 obo shipped on Sidewinder I do also have intercooler charge tubes for 60 obo shipped never out of the bag Buyer pays shipping out of lower 48 Thank you in advance for looking Please email me at tdmead1@hotmail.com

Stuff laying around I dont need. Prices Include Shipping Brushed Aluminum Doorlock Bezel - SOLD What it looks like installed Stock Shift kit (includes shifter, boot(no tears), bushings, bolt and linkage shifter bushing) - $25 shipped Stainless Oil Feed Lines. Larger hose is a 7 foot 6AN which feeds to an adapter (6AN to 4AN). The smaller hose is a 1 foot 4AN - SOLD Mock Sharkfin Antenna (should be able to turn it into a functional antenna with a bit of work) - $5 shipped PM me for fastest response!

GT Turbo "4in" CPE Inlet: $190 shipped obo Partial cobb sri : $50 Cobb SRI minus the maf housing, i have a filter also, just not in the pic

ETS 3.25" TMIC no bent fins SOLD!!! Turbosmart Compact Dual Port BPV SU Blackout Edition SOLD!!! Street Unit Boost Tubes SOLD!!! Street Unit Test Pipe new never installed SOLD!!!

For sale are the following parts: Turbosmart BPV kit (TS-0997-1009) -BPV (like new condition) -seal -install instructions -vacuum hose -comes with stock boost spring installed SOLD Cobb SRI -black SU silicon elbow -bracket and hardware (typical paint chipping and surface rust in some areas) -Upgraded Amsoil EaA filter (filter is clean and in great condition) -MAF housing SOLD TWM Short Shifter -Shifter assembly (mint condition) -Installation instructions SOLD

Few items for sale.. I will consider offers. PM me with any interest! Thank you, Zachary Stock air box with clean filter, The plastic is from dirty utah water, works fine(took off at 15,000 miles) SOLD!! Front Lisence Plate mount $10 Stock Springs(taken off at 30,000ish miles) $100 Antenna $15 Stock Front Grill(chrome was sprayed black, then i vinyl wrapped it) $25 Passenger Side Floor Mat $20 Center Dash Piece $30 Door Guard/Rub Rails SOLD!! Dated Family Photo

Looking for a good condition titanium grey MSP trunk with wing or just the wing itself. Please email me, mikespock@gmail.com

If I can sell these, then I will be swapping them out with some GC Sleeves for the front, but I don't want GC for the rear. I have a set of H&R Sport Springs powder-coated black from factory with no paint chips(since they were last inspected when my car was jacked up). Lowers 1.5"-1.8" I think the fronts sit lower. For anyone who doesn't know, the front springs are progressive, and the rears are linear. Since they are lowering springs, they are recommended to be used with shorter after market struts/shocks. I have not removed them from the car, but if I find a potential buyer, I will remove them, and provide pictures with a sign that's dated and my forum name before anyone sends payment to prove that I am legitimate. If anyone...

I used this mount for a few months then swapped out for the stiffer TRZ rear mount. I sent it back to CP-E and had a new 60A duro bushing put in so it is like new. Here's the link to the actual product on their page for more info: http://www.cp-e.com/products/mazda3/mazda3-mazdaspeed3-stage1-wishbone-engine-mount $100 shipped, paypal only, only ship to 48 continental US

Looking for stock or aftermarket turbo manifold for stock msp turbo, pm me...thanks