Marketplace

A Marketplace for all things Mazda. Buy, Sell, Trade and Check out our Sponsors

Sponsors

Check out our current Mazdas247 Sponsors as well as Sponsor Rules and Information
Threads
3
Posts
3
Threads
3
Posts
3
protege 01-03 parts FS!!! stroker crank+rods, j&s, plx wb02, greedy ebc
hey all. i havn't been here for a couple years now but thought i'd come and sell the remaining items from my now long gone P5. i took these pics with the appropriate signs a month ago. i can take new pics if necessary. prices are in USD and dont include shipping. open to offers. this is easily the rarest of parts for the protege for an absolute steal! the 2.1L K1 stroker crank + 5.4" h-beam long rods $1200 SOLD!!! DG fiberglass grille never installed, never painted, few small scratches, no cracks $100 SOLD j&s ultra safeguard used for a couple months. includes everything needed except a vacuum line, which i might have laying around. $410 SOLD plx WBO2 M-250 in great shape. used for a couple of months. $80 SOLD Goodridge...
FS: Fidanza Adjustable cam gears
i have a set of fidanza adjustable cam gears ( 2 ) with 12 deg advance or retard, i bought them and realized that i miss purchased them they will not fit on my fsde they are for the fe3 motor, brand new never installed and from what i hear they are not produced anymore. i took me 2 months to track these down and quite expensive when it was all said and done. i can not return them cause it was consumer error, but i am willing to sell them for Around what i paid not to include shipping (unless price is right). if these gears will work for you and ur setup please pm me and well talk, im asking 280 obo, for the set.i can separate them but really prefer not to! 1988–1997 Mazda Capella/626 1992–1993 Ford Laser 2.0iRS and Meteor 2.0 16v...
All-Weather Floor Mats, Rear bumper Guard
I have the following for sale. All these parts were originally purchased for or used in a 2008 Mazdaspeed3 All-Weather Floor Mats: Rear floor mats and passenger floor mats are pretty much in perfect, almost new condition. The driver's side mat has the normal heel wear, and thus is considered heavily used. New, these retail for $100. Asking $45 ($15 each for the good mats, and driver's mat is thrown in free) + shipping. Mazda6 Navigation Control / Remote The Mazda6 Nav control is also a removable remote control that can then be used to control the nav system anywhere in the car. This is new, and includes the tray. I bought it to see if it would work with the infrared sensor next to the Mazda3 nav screen, but I couldn't get...
MSD Dashawk
I'm selling my Dashawk because I don't really need it anymore. Its in great condition and comes with the unit, USB/Car cables. The software is available online, but if you really want I can but it on to a CD and send it. I'm looking for 230 shipped, but I'm open to offers. I accept PayPal.
DG Fiberglass Replica Lip
Purchased this a few months back, it's a fiberglass replica of a DG lip. it does need some work to get it to fit correctly though. whoever made the replica didnt make accurate cuts, so a few hours of trimming/sanding/test fitting are needed to fit it. asking $90 OBO, also open to trades Local pickup is preferred, but I am also willing to ship at buyers expense. send me a pm and we can work something out! dont be afraid to make an offer! Uploaded with ImageShack.us
Fs Dave B, Apexi J pipe, maf, hid, pioneer avh dvd player, etc come and see.
Things for sale. No dibs Things will be shipped (US Only) as they are paid for. Work M-F 6am-6pm I will ship on Saturday's. Paypal Preferred (bamflee16@comcast.net) Apexi J pipe w/ high flow cat ceramic coated 300+ shipping Spec 2+ clutch used less then 5k no throw out bearing 200+ shipping 3 gauge a pillar 60mm painted and comes with orignal a pillar for mounting 50 shipped. walboro fuel pump 60 shipped h4 xenon bulbs 10 shipped each 20mm bushings 15 shipped Brushed dave b rings 70 shipped Blank button with lighted switched mounted make offer Random wire harness for msp sub/amp rack to stock wiring SOLD single gauge pod sold brushed gauge surround Sold mazdaspeed oil cap sold. Pioneer AvH p4200dvd , wired with relay for anytime...
2006 Mazdaspeed 6 76k $15.5k
My brother is deciding to part with his 2006 Mazdaspeed6 Sport. It is the light silver not the darker grey/silver. Has no big defects, maybe a couple door dings, check the pictures down the side of the car. The motor was replaced 13k miles ago by our local mazda dealership under warranty after it blew up due to a bad MAF that the dealer refused to replace before the motor blew. This was a brand new 0 miles engine not a reman. All accessories are original as is the turbo so they have 76k miles on them. The transmission shifts well and the clutch holds great. Has only a couple modifications. Other Details Listed below. 2006 Mazdaspeed6 Sport Silver Black Cloth interior OEM MS6 Floormats 76k Miles on Body 13k Miles on Engine 13k Miles on...
DNP manifold GT3071 DP Complete pump with autotechs and cobb AP
Had a car uturn in front of me car is totaled, all parts have 280miles.. Complete pump with autotech internals SOLD Dnp stainless manifold SOLD Atp GT3071 with EWG housing AND CP-E 4" inlet pipeSOLD Cobb AP SOLD stock cat #2 SOLD E-Bay DP WITH both NEW BOSCH O2's SOLD boost pipe from stock TMI to TB with 6 port BOV and water meth tap.. SOLD MAKE OFFER ON WHATS LEFT parts are off of a 06 speed6 on street for 280 miles..
Carbon Fiber Mazda Column Pod - RARE
This is something that we tried to make a while ago....It never came to fruition. This is one of the only ones that was complete enough to use, so today I sanded it out and Recleared the piece. As you can see it will require trimming for the column and for whatever gauge or switch you want to install in it. Its the ONLY ONE I HAVE. When its gone, its Gone. It is not perfect, I actually have blended the edges with black where the biggest flaws were, but overall, it turned out very well. Piece is a DIY piece and Is sold "AS IS , AS SEEN" ...Ask all questions prior to purchase. $85 Is the price shipped in the lower 48. OneSlowSol@excite.com for PayPal
GI WTT t3/t4 turbo kit for t25 kit
so i got this good deal on a t3/t4 garret turbo low miles, obx mani and a exhaust kit with downpipe just finished up installing it on my MSP (comming from stock) ran it up to 10psi for a couple pulls and realized its just to big for what i want so im looking to trade my turbo kit for a smaller one hoping im going to come across someone looking to go bigger.. whats included in my trade Turbo - garret T3/T4 with anitsurge housing T3 flanged manifold with 38mm wastegate flange 2.5in stainless custom downpipe with 3 o2 bungs oil return flange for the turbo, high temp gasket from mani to turbo and turbo to dp ill need the same parts for the trade.. looking for a disco potato size.. gt28?! idk lmk what you have thanks
03 MSP Valve Cover W/O plastic cover
Im getting my new valve cover tomorrow and I figured Id throw up my old one if anybody wants it. Its the stock MSP with the bolt holes for the plastic cover BUT MY CAR DIDNT COME WITH THE PLASTIC COVER. I figured maybe somebody wants to swap their Protege cover for an MSP one and get the carbon fiber cover. Then you can sell your stock Protege one. Also, I have a guy that does Sandblasting and painting so if you want to go that route let me know but the price will go up...... MINE AND PROPER SIGNAGE! POSSIBLE CARBON FIBER COVER (NOT INCLUDED) VALVE COVER OUT OF JUNKYARD I SCRUBBED THE CRAP OUT OF THAT AND BARELY MADE A DENT!!!! So I sent it off for sandblasting. I HIGHLY SUGGEST SANDBLASTING!! And like I said. Painting is also...
Recently Traded the MazdaSPEED6 and have some things I need to get rid of... First up COBB AP SOLD SHIPPED USPS Priority DEL/CONF Insurance OBO, had it on my mazda for about 4 months... http://i778.photobucket.com/albums/yy68/Tedro63/M247FS002.jpg Second and last is a Smoking K04 45000 miles $90 SHIPPED UPS (DUE to Weight and Size) http://i778.photobucket.com/albums/yy68/Tedro63/M247FS001.jpg
Back