Marketplace

SOLD SOLD SOLD Parting Out with Less than 12,000 miles. DP has two bungs. DP - asking $265 shipped TP - asking $90 shipped Buy both $320 shipped

first off i do NOT have the front mount for sale. like to make that clear. second. please PM me with any questions or to contact me. i dont get on the forums much anymore so i may not see any posts here. and please be patient i dont normally check pm's till the evening, but i will respond to everyone. i have hardrace engine mounts for the rear, passenger side and transmission side of MSP's or protege sedans or wagons. these are advertised as being for manual transmission cars. not sure if they would fit autos as i dont know the difference between the mounts. i assume the tranny mount would be most different. these are used. not sure exact mileage, but the previous owner had them installed for 2 years before switching cars and...

Exhaust Depot FMIC w/a two couplers being sourced elsewhere. I'm the 2nd (possibly 3rd, can't remember) owner of this, but I personally never got the chance to actually install it (time constraints, then car got totaled). PENDING SALE...No damage (cracks, kinks, etc) other than the expected cosmetic/surface wear & tear. Not show-car quality, but perfectly functional. Asking $350 local sale, $375+shipping. Lower asking for local price as that's much preferable. Willing to drive & meet up a reasonable distance if nec. Nicer pic...same stuff, just meant to post back in June. Used 2004-2009 HATCHBK LED passenger taillight. No cracks/damage. !!!!!!!!!SOLD!!!!!!!!!!! (4) OEM cartridge filters, both large & small o-ring gaskets...

Tokico + H&R springs are local pick up only. They have about 50,000 miles on them. Three out of the four shocks are blown. H&R springs lower the car about 1.3". $100 local pick up only. Zip code: 92139. SLS 2.5" Catless Aluminized Steel for the Protege 5 or Mazdaspeed Protege bought from ProtegeGarbage, I mean ProtegeGarage. Includes gasket. No bolts included because you'll be using your stock ones. O2 bung included. $125 shipped. DG Carbon Fiber Eyelids. Faded and cracked at the bottom. Repaint them any color or mount them as is. One eyelid is chipped at the edge. Sold. Stock single disc Protege 5 radio. Left seek button is loose, but fully functional. $20 shipped.

I am a member of ****************.org with over 2000 posts, and have sold numerous items there with no issues. I am selling these as I am parting out my car. Items: 1. SOLD Sure Aeros SRI v2 in blue. This is hands down the best sri for the ms3. This includes the SURE filter, and a new amsoil filter, in the original SURE box. - $140 shipped 2. SOLD ptp/HPFPupgrade.com 2150 psi Fuel Rail Pressure Relief Valve. Used on my car for 50 miles to confirm operation, and then stored as a spare. - $175 shipped (these are $300 new) I take paypal or cash if picking up locally. I am located in Weston, FL.

12x1.5 Fits Honda, Mitsubishi, Toyota, Mazda $85 plus shipping

Fs: Mazdaspeed performance accesories cai intake for mazda3 For Sale: Mazdaspeed Performance Accesories CAI for Mazda3 (2004-2009). I also believe it fits mazda5. Never used but it has some light scratches on the intake tube and also the filter cover top is slightly bent due to improper shipping methods. Selling it because i was gonna install it in fathers car, but it got stollen. :( Includes: Intake Tube, Filter, Filter splash shield, Filter cleaners, Hose, Clamps, bolts, stickers and bushing. Asking $160 or best offer + shipping via USPS.

I turned off the green so I'm starting a conventional FS thread with pics. I still have lots of parts that aren't pictured and are posted in older threads, but I'll get to them later. All prices are SHIPPED in the continental 48. Paypal to tom@popeperformance.com ONLY if you are relaxed about shipping. I will be going to the PO on a regular basis to ship downpipes, but I won't be making special trips for one item at a time. I also don't generally supply tracking numbers. If you will have an issue with not knowing exactly what day your part shipped and/or not having tracking please shop elsewhere. I have 2 kids, a wife, a job, a business, and another project that take priority over this stuff. Please understand ahead of time. AWR front...

Mazdaspeed3 part out-updated! I have a few parts for sale. First, the CarXlink, with the bluetooth adapter I only had this installed for a short period of time nad I'm looking for 140 shipped. Cobb turbo Inlet-SOLD!!! Cobb short ram intake - 120 shipped Cobb BPV- SOLD!!!! I also have Hotchkis F+R sway bars that I'm looking to sell locally. They arent pictured because I'm not interested in shipping the larger items. I am local to San Antonio/Austin and getting to Houston wouldnt be a problem either. Thanks, Charles

Forge bpv!! Hello, I am selling these items for my brother inlaw. He is going to either sell or trade in his 2008.5 ms3 GT for a family car. Forge bpv made for the Boobaru WRX but fits perfectly on our cars , just use OEM bpv gasket, and the best thing is NO PING! Just a nice CHOOOSE sound excelent condition, has blue spring and two shims installed, only around 2000 miles on it $110 Shipped!!

just the block yes for $15 bucks. it would be perfect for forging, and being able to keep your msp on the road. I only have the block nothing else, no bent rods or cracked pistons. it dont have the oil pan or the plate where its tapped for a turbo but your msp has those parts. this is a damn steal.

SOLD Rubber Cargo Tray for Mazda3/Mazdaspeed3 - $45 shipped SOLD I have a rubber cargo tray that fits a generation 1 Mazda3 and also Mazdaspeed3. It has no rips or damage of any kind - $45 shipped It's the same one listed in the below link. http://www.mazdastuff.com/product.cfm?ProductID=2678

I had a pg manifold reflanged a few years ago and decided just to go in a different direction. The manifold allows you to use a T3 manifold in the stock location and is fitted with a 44mm ewg. I'd like to get $300 shipped for the manifold. I'm selling my HTA GT3582r b/c I don't feel like uninstalling my Gt3582r. The HTA GT3582r spools sooner and makes more power than the Gt3582r but alas I'm happy with my setup as is. Looking for $1800 shipped for the turbo. Btw, specs on the HTA Gt3582r , T3, 1.06 a/r , 3" vband discharge, 2.5" outlet/4" inlet. If someone local buys it I can fab a dp for a extra $$$$ but you must bring me your car cause as I mentioned I'm too lazy to take my set up apart or I would be installing it.

OEM bpv recirculation hose (from bpv to turbo inlet). Used for only 15k miles, MINT! 30 shipped Feedback from past buyers: iTrader reviews **PM IF INTERESTED**

sold

FS: Kenwood KIV-700 deck and Bluetooth module *PRICE DROP* Title says it all! I've got a Kenwood KIV 700 deck that was installed for less than a year. It is a currently available model and as far as I know has the latest firmware update. I actually REALLY love this unit. It has all of Kenwood's best tuning features (time alignment, full x-over control, 5 band eq etc...) plus 4V preamp outputs. You can read all about it on the kenwood site. The main reason I stopped using it? I'm super vain and wanted a double DIN unit to fit my dash kit. So anyway, I upgraded to a double DIN kenwood deck, and I actually seriously tossed around the idea of putting this deck back in for a while. This deck sounds great, is VERY easy to...

Hello i'm selling steering wheel remote control cable for car audio (sony pioneer) the code are CTSMZ002 CTSONYLEAD here you can find tome specs: http://www.connects2.co.uk/c2search.aspx?catID=116 http://www.connects2.co.uk/c2search.aspx?catID=24&manID=217&modID=926 I can ship internationally Price $40 Conditions: NEW never used Interested?

i have a stock exhaust off my 2008 mazdaspeed3 this will fit any mazda 3 mazda3 hatchback and possibly any regular mazda3 this will add performance and power to your car and will give it a nice sound, and a sporty look. has been cut because thats the only that it can be uninstalled and installed needs to be re welded at a muffler shop or if you have a welder. call or text alex 951-240-2248 asking $160 plus shipping

Howdy, everybody! I've got some extra stuff left over from when I had my P5 that I would like to sell in my quest to buy an almighty BG chassis Protege. Please feel free to pm me if you have any questions. I think my prices are fair, but I can maybe work with someone over a few bucks just to get this stuff out of my garage. Prices do not include shipping. I work full time, so please allow some time for me to arrange packaging and shipping quotes for the part(s) that you purchase. I don't want you to think I'm a scammer! lol Thanks for looking! Progress 22mm Rear Anti-sway Bar - Sold Thanks again for looking, everyone!

Hey guys! Just trying to reimburse my rebuild fund and clear out some space in my garage. All prices are shipped to US and offers are welcomed. Out of country buyers pay shipping. Stock BPV- $50 Stock TMIC- $100 Stock Inlet pipe- broken nipple... Worthless Pg Short Ram w/ couplers- $60 Stock downpipe- $100 Stock midpipe- $80 Stock mid-chassis brace- $65 Stock hood duct- $110 Stock 1st gen wheels. I wiped them down real quick just to show NO CURB RASH, but will clean them upon purchase. - $400 Stock RMM- $50 PayPal is hymer741@gmail.com Thanks for looking guys!