Marketplace

Original DaveB Gauge Rings Sold Brushed Finish. Press Fit. How-To Install Disc Included. Protege Sidemarkers $30 Shipped Light Black Finish w/Nightshade (Easily removable). Mazdaspeed Emblem $25 Shipped Black Finish. Peel & Stick. Shipped prices are for the continental US.

Hey all, Just putting feelers out to see if anyone would be interested in my White P5. Pretty much bone stock, save the Poly sway bushings, MOOG sway links, and KN drop in filter. Also has a AWR right side motor mount (low durometer) becuase the OEM replacement ones never fit right or lasted long. My profile has some 6 month old pictures of it, but Rust has progressed a bit since those were taken. Could use some loving to take care of the rust, I have started to lose motivation with it. I do regular maintenece religiously, and the FSDE still pulls strong. I have had 5 cars with this engine, so I know how to take care of them. Kinda sad to see it go, but I do not have the enthusiasm to do all the rust work on a car that will probably...

I traded for an MSP a couple months back, and first thing I did was take this thing off. I was going to put it back in but Ive decided to turn down the wastegate and get a MBC to rrrright below Fuel Cut. Aaaaanyways, us MSP guys being so fragile its like selling a polished turd to a diamond dealer. 40$ shipped. 100% CASH BACK guarantee. As long as its not working, I AM NOT RESPONSIBLE FOR BLOWN MOTORS OR IMPROPER INSTALLATION!! I even looked up the install directions for you. Its just missing 1 wire and the rubber cover. Im not trying to screw anyone, and honestly Id rather trade. Id like a Boost gauge, or manual boost controller, vacuum hoses, 2.5" resonator, exhaust, pretty much anything.... THE ARROW IS WHERE THE WIRE IS...

Got a set of Ground control/Eibach Coilover kit for those who wants to upgrade to a coilover set up. a few months old In the kit: springs 78701 / GC200.64.44 78708 / GC180.64.61 anodized, threaded sleeve and adjustable spring seat made out of high strength 6061-T6 aluminum retails for 399 new 250 shippped obo

1994 Mustang GT Drift Car Want to go drifting with V8 power today? Wowee, trade me your Protege and you are set. I just took a job with a long-ass commute and I don't need a drift car as bad as I need something with cruise control. Must be manual transmission or keep walking. 1994 Mustang GT 5.0L V8 Kikey seat with super rare cover BC Racing coil overs BBK H-Pipe Flowmaster exhaust A ton of spare wheels and tires List Date: 4/8/2013 For more info, click here to view the original listing: 1994 Mustang GT Drift Car -------------------------------------- On Sale For: $3684.21 + $0 Shipping --------------------------------------

No dibs. I ship to the USA (Lower 48). No shipping outside the USA. I accept paypal. PM me for the paypal address. Used for around 20K miles. They have some scratches and marks on them, but they are still in good shape. I don’t know the exact numbers, but it is somewhere around a 2” drop all around. It’s a pretty even drop. Sold Front compared to stock springs. Rear compared to stock springs. This is the best picture I have showing what they look like installed. This is on stock struts.

Brand New set of four Tein S-Tech springs for the 3rd generation platform. $180 shipped Head unit: $18 shipped

I have a lot of random old parts that I never got rid of as my build progressed/Changed my loss is your gain. Now that I am forging I will be updating this with parts from the donor motor as well but at a later date. All prices shipped to the 48+ unless otherwise stated. will entertain shipping elsewhere (price will vary). Forge BPV VER2: New $115 shipped AEM UEGO O2 white AFR, Black Lambda, Black AFR backgrounds- all wiring 53mm. Will most likely need new sensor USED. $120 Shipped Clutch: Preference to shipping as a whole assembly but will part out. parts had 90k miles on odometer but condition is good (ask for better pictures if desired) Pressure plate: $30+ shipping Clutch disk: $20 + shipping Flywheel: 30 +shipping...

its a little dented up from hitting the trailer hitch and scrapping the ground. a little elbow grease and she wont look half bad. surprisingly heavy so im asking $75 plus actual shipping cost. you paypal for the agreed price and then i ship it with YOUR chosen method of shipping. i will send you a pic of the receipt and you paypal me the actual shipping cost. i will only ship to an approved paypal address. it is also for sale locally, first to pay gets it. paypal: kudakev615@hotmail.com and it will be shipped from 23220

im just guaging to see if anyone would want some parts i have since i might be silling my car. I have an fsde engine block, crank and head. Block, crank and head still available Make me an offer!!!

I recently sold my 2003.5 MAZDASPEED PROTEGE and i have some left over parts i just want to get out of my basemant. -OEM 2003.5 MSP SPRINGS WITH 80,00 MILES ON THEM $120+SHIPING OBO!! (MONEY TALKS) -OEM RACING BEAT MUFFLER $200+SHIPPING OBO! (MONEY TALKS)

Cobb SRI Intake Cobb SRI Intake from 2006 Mazdaspeed6. Great condition just a bit dirty. Taken off because I am trading the car in. List Date: 3/17/2013 For more info, click here to view the original listing: Cobb SRI Intake -------------------------------------- On Sale For: $110 + $20 Shipping --------------------------------------

Hey guys/gals, I recently sold my P5 and the buyer didn't want the roof racks, so I'm selling them! They are OEM Mazda roof racks for the 02-03 P5. Not sure if they fit any other Mazda models. They are in great condition. The locks work fine and I have two keys for them as well. **These are the Canadian model roof racks (the ones that sit a bit higher off the roof) I also have a 38" Thule fairing and a snowboard attachment I can include as well. I'll have pictures up tomorrow after work. Asking $125 OBO. Contact via PM or email at [removed] Located in Niagara Falls, Ontario Willing to ship worldwide if needed (at buyers expense)

FS: OEM Head Unit 2011 Mazda CX-9 - 4.3" MlD - 6CD Changer/Back-Up Camera & more! Subject says it all...in "Like New" condition. Includes In-Dash 6 Disc CD Changer with 4.3" Multi-Information Display, Rear View Camera Ready (separate camera required), Bluetooth Streaming Audio, Satellite Radio, etc. Taken from a 2011 CX-9 Touring AWD. Please PM with offers...will consider any and all offers. Free shipping.

AC Dials from Font Motorsports These are the chrome ringed AC dials that Font Motorsports sells. They are very nice and light up at night. Here is the thread for when they become available: http://www.mazdas247.com/forum/showthread.php?123811591-AC-DIALS-Font-Motorsports The only reason I'm selling them is because I don't have the Mazda2 anymore. List Date: 4/1/2013 For more info, click here to view the original listing: AC Dials from Font Motorsports -------------------------------------- On Sale For: $40 + $0 Shipping --------------------------------------

Like the title says, up for sale is a set of OEM springs off my 2008 Mazdaspeed 3. Upgraded to Cobb springs so I no longer need these. Looking to get $80, but willing to entertain other offers. They are in great shape and just have the normal wear. PM me with any questions.

Hey there guys! This is not a forsale thread of something like that. I just wanted to share with yall, since ive seen alot of ppl wanting a sport20 front end conversion, well theres three for sale online right now, same seller i got mines from. so hurry and buy it. this is the link, hope this helps http://www.ebay.com/itm/MAZDA-FAMILIA-2000-Front-Bumper-Assembly-9031010-/330891377063?pt=Motors_Car_Truck_Parts_Accessories&hash=item4d0aa9b9a7&vxp=mtr#ht_9375wt_1006 http://www.ebay.com/itm/MAZDA-FAMILIA-2000-Front-Bumper-Assembly-5031010-/330892013256?pt=Motors_Car_Truck_Parts_Accessories&hash=item4d0ab36ec8&vxp=mtr...

So im selling my CX racing custom ms6 FMIC. Im about to sell the car so im bringing her back to stock! I will need the stock TMIC in exchange for the FMIC im selling plus $325.00. and shipping of course! It comes with everything needed to do a direct swap. I did cut my crash bar for max efficiency but I have seen setups extremely similar to mine setup without cutting the crash bar. Bar & Plate Intercooler 28x7x2.5 inch - Inlet and outlet sizes: 2.5 inch CX racing BOV 2.25in Hot/Cold Piping Couples to stock turbo and stock intake manifold All T-Clamps, Screw Clamps and 4ply silicone couplings needed are included This is one of the most efficient designs if not the most efficient design out there! I did all of the math/...

Asking $400.00 Shipped for this, PM if interested. It does come with a SD card that has the instructions and tuning software..

anyone interested in a good 60k turbo head? been sitting for a little while, but still good. includes cams and gears too. injectors negotiable. great for someone who wants a good head to pnp. shoot me some reasonable offers.