Marketplace

Medeival Rear Motor Mount-Never Used Medieval rear motor mount. It has never been used. There is a tiny bit of surface rust on the outside of the inner bushing sleeve. (This is from being in the trunk of my car for a year with a small leak in said trunk.) The paint, bolt, lock nut, and bushing are in new condition with no blemishes. $75 shipped. Thanks. List Date: 2/27/2013 For more info, click here to view the original listing: Medeival Rear Motor Mount-Never Used -------------------------------------- On Sale For: $75 + $0 Shipping --------------------------------------

Everything gone!

after 10 years and 200,000 miles is time to move on from the protege and clean out the garage :( for parts listed "+shipping", send me a PM or email - ddittto@gmail.com - with address and ill return with shipping quote as soon as possible. use the same contacts if you like more info on a part, require more pictures or want to try and haggle. items marked shipped is for shipping in the contiguous 48 states, shipping costs added for outside that area. i will be out of town between Aug 29th and Sep 3..if any inquires come through at that time ill will try to respond while away but most likely those inquires will not be responded to until Sept 4. link to all pictures http://s1281.photobucket.com/user/ddittto/library/?view=recent&page=1...

Selling my smoked tails of my 07 6i. Trying to sell asap before I leave to NAvy Boot Camp and don't want these lying around the house for the next 7 months. Im asking for $65 shipped.

Hey folks. Cleaning out the basement along with planning to sell the car. Car thread here: http://www.mazdas247.com/forum/showthread.php?123831406-GI-Black-Mica-493-137k-miles Sorry about the kinda crappy pics, I know the sign is washed out in a lot of them. If needed, I can try again. Prices are shipped. Reasonable offers considered. I'll try to check this thread frequently for the next couple weeks. AWR Rear and Trans Mount. $120. Bought used, never installed. REAR SOLD. http://imgur.com/Z2mcrKx Stock intake manifold, VICS failed, then I pulled it off the car. $50 shipped. I'll throw in gaskets and the EGR tube from one of ProtegeGarage's manifold change kits. http://imgur.com/6sMjEcb Dual gauge surround. I think this...

Mazdaspeed 3 Front Mask Brand New Brand New Never Used Front Mask for 2007-2009 Mazdaspeed 3 Comes with all hardware to install. This item must go!! List Date: 8/28/2013 For more info, click here to view the original listing: Mazdaspeed 3 Front Mask Brand New -------------------------------------- On Sale For: $106.05 + $15 Shipping --------------------------------------

Factory Exhaust 2007 Speed3 2007 Factory Mazdaspeed 3 Catback Exhaust - cut over the rear axel. this is in 2 pieces. clean. hangers still on. no hardware. List Date: 8/28/2013 For more info, click here to view the original listing: Factory Exhaust 2007 Speed3 -------------------------------------- On Sale For: $200 + $40 Shipping --------------------------------------

I recently traded in my 09 MS3 Grand Touring for an Infiniti G37X Coupe. Before I traded it in I removed all of the extra parts I added to it, and they're all for sale. A few of these items are BRAND NEW and were never used (see below)! Will only ship items within the US - please PM me with any questions, payment will be via PayPal and all items will ship via USPS with tracking. Items left for sale (sold items removed), some prices lowered: 1) Kanatechs Bose Adapter for aftermarket radio (does not include the wiring harness below this adapter in the 2nd pic!) - $60 shipped

Well I decided to completely part out the car. Paypal please: Cmprice2009@ymail.com 2001 Mp3 protege 110k miles. Anything you have a question on pm me and ill list a price. Big items: 1.) Tinted tails (done professionally and light up amazing) sold 2.) black regular protege gauge cluster $50 shipped 3.) Maf $40 shipped 4.) Fiberglass grille painted gloss black professionally (dont know the brand but it fit perfectly) sold 5.) column gauge pod sold 6.) Carbon fiber EVO Style hood (the good one, not the crappy one with the gay side vents. Was professionally painted) $400 You pay shipping 7.) Full interior, seats, door panels, carpet, pillars, everything.... YOU MAKE OFFER...YOU FIGURE OUT SHIPPING 8.) Full 5 lug swap..all...

USED WRX injectors 440 Here we have 440cc injectors from an 02' wrx that will fit 03' mazdspeed protege. They only have 27k miles on them. List Date: 7/31/2013 For more info, click here to view the original listing: USED WRX injectors 440 -------------------------------------- On Sale For: $100 + $0 Shipping --------------------------------------

As title states, EGR Valve with Gasket and Bolts. ~40-30k miles $80 shipped.

FS: GTSpec Trailing Arms, Intake & Exhaust Manifold Gaskets, OEM Oil Filter, ETC ETC Hey all... still finding parts. All prices exclude shipping. Everything is in perfect working order. sold as is. priced to sell. USED GTSpec Trailing ArmsSOLD USED OEM Mazdaspeed Protege Fuel Pump (about 40k miles) $15 OEM Mazda Intake Gasket SOLD OEM Mazda Exhaust GasketSOLD OEM Mazda FSDE Oil Filter $8 OEM Mazda Driver's Side (Left) Brand New Fog Light Delete $12 Stainless Steel Braided brake lines SOLD More pix upon request.. im just lazy :)

Sold Parts Engine Trans Rear bumper Seats Radiator Sub Enclosure Mid pipe Shift knob Pedals Door Sills Floor Mats Turbo Engine harness Steering wheel Hood Head lights Driver fender Grill Available parts Front LX bumper Side skirts 2 sets (1 set has a cut in one of them) Truck Spoiler Dash Mazdaspeed Cluster Driver door mirror Passenger Door mirror (was broken off and then repaired) passenger fender All for doors Steering rack Factory turbo manifold Center console Other odds and ends Set of 4 factory silver 5 spoke protege 5 wheels 16" With tires. (1 is low tread, other 3 is 50% or so) Set of 4 aftermarket black and silver wheels 17" With tires. (Pictured) Tread is 85% What is anyone looking for. Pics can be available on request...

This is a Protege specific 3rd Brake light flasher that I built. Has the protege wiring harness for plug and play installation. For the sedan with the spoiler light it will install under the trunk lid (see photo) (30 second install) For the P5 it will install under the rear spoiler (10 minute install) For the rear deck mounted light it will install under the deck. (30 second install) It is fully adjustable for the number and rate of flashes. Once the predefined number of flashes have occurred the 3rd brake light will remain solid until the brake is pressed again (complies with Canadian and US laws). Video of it in action https://skydrive.live.com/embed?cid=3391157111DAEFEB&resid=3391157111DAEFEB%21120&authkey=AHZq2qLVLY_wqGE $45...

I'm selling my speed6 I'm gonna just post my Craigslist add my phone is having trouble uploading photos but anyway car has been great I'm asking 13 but would sell to u guys 12,500 so lmk if your interested texting results in faster response my number is on my add.. [link removed]

Trans With Torsen Revised, Engine, and Fidanza flywheel transmission with a revised torsen limited slip differential I got from protg garage asking $600 picked up only engine with a slight rod knock at 2500 rpm in cylinder 3 perfect for a engine build asking $250 obo pick up only Fidanza flywheel with only about 15k miles on it asking $200 obo +shipping

So I have a almost brand new MSP lip that I was gonna slap on but lately I'm feeling the SEDAN lip.....Does anyone want trade? Of course your lip would have to be in similar condition to mine

2008 Mazdaspeed 3 Rims - Willing to ship - 1 good 2 not so good Price Drop! I have a set of 4 mazdaspeed 3 wheels. I have driven on them for 16k miles, they have 37k on them total. 2 of the wheels are straight and did not cause any vibrations 2 of them caused vibrations and spent their time on the back. All 4 of them have minor surface finish blemishes There are only 3 center caps - they go first come first serve if the wheels are sold individually. Shipping estimates are $22.00 per wheel FedEx to conti US. Wheels are located in Battle Creek MI - Willing meet up within 1 hr radius. $75 + shipping per good wheel (#1 and 2) $200+shipping for the set

Set of Mazda2 Steel Wheels with TPMS and Covers FOR SALE I have a set of steel wheels from my 2012 Mazda2. They have ~5000 miles on them. All have around 7mm or 9/32nd of thread on them. All have their TPMS and nearly perfect wheel covers. One of the cover has minor scratches you can see in the picture. Unfortunately, one of the tire was damaged when I swiped a curve. As you can see in the pictures, sidewall was damaged and is beyond repair. Wheel however, only received small damage. $175 - OBO Strongly prefer loca pick up, but willing to meet someone within 250miles of zipcode 30024. Thank you. List Date: 8/20/2013 For more info, click here to view the original listing: Set of Mazda2 Steel Wheels with TPMS and Covers...

Set of 4x100 15x6 Wheels with Yokohama S.Drive FOR SALE I have a set of take off wheels from Ford Escort GT. I had it on my 2012 Mazda2 for ~6000 miles. They are not pretty or light by any standards, but it will serve well as nice backup or mount some snows and use them as rally-x wheels. Size is 15x6, bolt pattern of 4x100, hub bore of 54.1. Tires mounted are Yokohama S.drive in 195/55/15. Also included are set of four 3mm spacers in same bolt pattern and hub bore. $225 - OBO Strongly prefer local pick up, but willing meet someone within 250miles of zipcode 30024. Thank you. List Date: 8/20/2013 For more info, click here to view the original listing: Set of 4x100 15x6 Wheels with Yokohama S.Drive...