Marketplace

2003 Mazdaspeed Protege I am selling a 2003.5 Mazdaspeed Protege. The car handles great and has a brand new Garrett T28r turbo in it. Currently the car has a bent rod so the engine needs to be either re-built or replaced. Everything else is in really good condition just some minor scratches and dents. At this time I don't have the money to put into the car so I am trying to get back a little bit compared to what I put into it. This will be a great project car for someone and I am sad to see it go. List Date: 10/25/2013 Location: Jackson, NJ, 08527 For more info, click here to view the original listing: 2003 Mazdaspeed Protege -------------------------------------- On Sale For: $3500 (Local Pickup Only)...

Updated! Mazda Protege and P5 Part-out, everything is for sale! Everything works on both vehicle One engine left and is a 2.0L has 195 000km and burns no oil. 300 Automatic and 5 speed transmission 150 Front and rear seat Black and blue 100 Door windows 20$ Elec. windows motor 30$ Door 50$ Windsheild 100$ Starter 40$ Alternator 60$ A/C Compressor 50$ P/S Pump 45$ Radiator 50$ A/C Radiator 50$ Blower motor 40$ Heater core 30$ Sunroof with mecanism 80 Fully loaded.Cars is equipped with the 5 bolt pattern and rear discs. Full conversion 250 Rims 5x114,3 with winter tires 100 Everything is for sale.

Whats up M247 What i have for sale are brand new in the box AEM FIC fuel ignition computer and EFI wizard 1000cc injectors. Sold my car and this is what i have left. Looking to get 380 obo for the AEM FIC and 280obo for the EFI Wizard injectors

Ok to start I want to apologize for breaking every rule about selling here. I have now read the rules and am now ready to do this right. I have a nice condition 2003 P5, except for the spun rod bearing. Unfortunately the oil pan had a leak and I took it down the road after a long park and the rest is history. I tried to sell it locally and best I could do would be $500? Surely I can do better with parts? Name what you want and I will do my best to get the info you need and take a good close up picture. Please note that I will only ship once a week as I live far from my post office. Also I live in Canada and I have to ship over the great Canukistan wall, meaning by rule here I have to use a Courier. Contact me for details

I want to swap my headlights for MSP headlights. I don't care to black out my stock ones, because if I make an error it'll bother me even if its not visible. If I bought MSP headlights and MSP HID kit (ballast's, sockets, bulbs) For one the sockets would match the headlights Two, the bulbs would be converted to one OK my question is now, would I still need to do any re wiring to make the MSP ballast work on my Protg5? This could be entirely stupid, but if anyone had done or attempted to do this feel free to chime in. Thanks!

2004 Mazda RX-8 GT not running Currently, I have a 2004 Silver Mazda RX-8 for sale. Silver in color with a CLEAN TITLE. The car is not running, which is why I have to sell it. I would like someone who is a car enthusiast or has a passion to build this car back to running condition. The motor will NOT start. I am not sure exactly what is wrong with the motor. One day, I started the car to warm it up and next thing I know is that the car just shuts off on me and won't start up again. 85,XXX on the motor The car still has a lien on it from the bank. I still owe a little over 3k left on the loan. Really, I would like to this car sold before August 18th, or else it's going back to the bank for repossession. I am open to offers, but not...

I have a set of 4 Spicy Orange doors for sale. They come complete with side mirrors, interior panels and power window switches. They have rust on the bottom inside portion of each door. The drivers side rear door has a small dent. I'm selling them for $250.00 firm. Located in Brampton (20 mins from Toronto) [link removed]

There has been some interest in my Clunk Fix Brackets and I would like to see how much interest there really is. Prior to going ahead with any orders I will be looking for a $50.00 deposit, so if you add your name here be ready to make that deposit when asked. I will reactivate my AMM status prior to accepting any money's. 1.

CPE CX-7 Standback2 & PNP harness For sale is a CPE Standback2 Engine Management System and Plug-n-Play harness for 2007-2010 Mazda CX-7's. I recently traded my '09 CX-7 in for a Prius and have no use for this anymore. I installed it and had it working beautifully for months right up until I removed it so I could trade in my car. Everything is in perfect working condition, no bent pins on the harness, no cut wires, etc. This is everything you need to run custom engine management on your CX-7! Included: CPE Standback2 Engine Management System, CPE PnP Harness for 07-10 CX-7's, by-pass plug, and instruction booklet. Feel free to ask me any questions! From CPE: The Standback piggyback engine controller was designed, tested, and...

Blew my LSD a couple of days ago and now need cash to fix her up.. Everything is priced to ship and no out of states shipping sorry guys... Paypal- wi_boi@msn.com SORRY PIX ARE HUG ASS HELL Greddy Turbo Timer and PRofec B-specII Boost Controller - $200 shipped for both or $170 for Boost controller and $40 for TT now $150 for both shipped SOLD! Projector head lights. $140 shipped Works fine but would required work to make it work right.. Here's a link to my other page on more detail description of the headlight now $100 shipped http://www.mazdas247.com/forum/showthread.php?123821073-some-parts-for-sale&highlight= LCD Carputer $130 shipped $100 shippedNOW $80 shipped Custom Black HVAC surround with fully molded 7 inch Lilliput VGA...

CX-9 Floor Mats Selling the full set of cx-9 floor mats these were literally used for about 3 months, are practically brand new. If interested please let me know. thanks! List Date: 10/21/2013 For more info, click here to view the original listing: CX-9 Floor Mats -------------------------------------- On Sale For: $175 + $0 Shipping --------------------------------------

I have crank cams cam gears mbsp alternator complete intake manifold flywheel valve cover coils wires complete trans no axles sry starter j pipe dp stock wastegate please fill free to text me with any questions my name is Ben and I'm selling this stuff to do a kl swap thanks for checking out my fs thread 239-823-0914[ATTACH=CONFIG]204248

Mutegi NeoChrome Lugs; 75$ Shipped MSP Door Sills; 40$ Shipped MSP Steering Wheel With AIrbag; POST OFFER MSP Front Axles with brakes still attached (pick up only); PM MSP Rear hubs with brakes still attacked; PM 2003 MSP Gauge Cluster; 125$ Shipped 2003.5 MSP Gauge Cluster; 125$ Shipped 2003.5 MSP Gauge Cluster; 125 Shipped DG Motorsports A Pillar With Gauge Pod; 275$ Shipped The door sills have common wear from getting in and out all the time, the A Pillars are in good shape still. Gauge CLusters plastic clear face on one is cracked and has spots on the other two but everthing else works fine on them, I do not remember the milles and I cant check due to not having a Protege anymore. :)

Mazdaspeed Protege Lower Grille Pretty simple; just a clean, stock, lower grille for a 2003 Mazdaspeed Protege. Email me with any questions. Thanks for looking! List Date: 10/21/2013 For more info, click here to view the original listing: Mazdaspeed Protege Lower Grille -------------------------------------- Item Has Been Sold. --------------------------------------

Mazdaspeed Protege Stock Hot + Cold Pipes (with stock BPV) and Stock Intake Set-up Hey there! I'm selling the stock piping (with stock BPV included) taken off of my 2003 Mazdaspeed Protege. The reason they were taken off the vehicle is because I replaced my stock piping with aluminum hard pipes. Other than a couple clamps and screws missing (used some of them to install my new piping) there is nothing wrong with them; they work perfect. Thanks a bunch for looking! List Date: 10/20/2013 For more info, click here to view the original listing: Mazdaspeed Protege Stock Hot + Cold Pipes (with stock BPV) and Stock Intake Set-up -------------------------------------- On Sale For: $130 + $0 Shipping --------------------------------------

Selling my WORK RS Type (Closed End) Black Lug Nuts. Missing 1 Lug, but it can be purchased for $7.50 @ http://www.workwheelsonline.com/work-rs-type-closed-end-black-replacement-lug-nut.html No fading, cross threading, etc. Perfect set other than 1 missing lug. There are 4 Locks, 1 key, and 15 Lugs They came off my OLD MS3 and have been in my toolbox since 2010. I drive an STI so these wont fit :( $75 SHIPPED. SET SELLS FOR $150 NEW. My old car :) -Jeff

I have an old-style HKS 60mm oil pressure gauge (electronic) up for grabs. Purchased way back when I had a 240sx, and never installed it because the car was totaled. Never installed, everything in the pic is included. Asking $150 OBO. Buyer pays shipping. If in Canada, Interac EMT, all else, PayPal is okay but please add 2% for PayPal fees. Will ship internationally.

all black ver. 4 hks bov with flange to fit mazdaspeed 3 or mazdaspeed 6 price is obo. pm me if interested

stock msp stuff - wrx 440s - obo Everything here i want gone. im not posting prices, make a reasonable offer (include shipping from 19604 via USPS) and its yours MSP manifold uncracked and in good condition. needs studs tapped out - SOLD MSP S pipe same as manifold MSP smic MSP exhaust hangers, no tears MSP radio bezel with a few very small scratches MSP gauge cluster cover with a small hole on the left side drilled for my valet button MSP cat back exhaust (pick up only) in very good shape(oval tip) MSP egr valve - SOLD MSP stock air box with every part to install MSP heat shield - SOLD WRX 440s Aftermarket smoked tail light passenger side only MSP engine cover w/o screws to mount

Motivated to sell Got this a couple years back, need to focus on power/handling not the looks. $125 OBO shipped lower 48 any where I'm willing to split shipping Price drop $115 shipped Price drop $105 shipped 9/27/13