Not as fun as golfing, but satisfying

:
06 LS MS6
07 BM GT (shell has been struck from the roll)
finally got around to this last little bit of appearance mod.
two buds havin family time and oznium shipping quck set the timing for yesterday.

I took a couple extra pics, but don't consider this a how to.

poppin the headlights apart is really not that bad, we will see after I have to drive thru the next tampa thunderstorm how well I resealed, but I am confident when it gets about 2pm hot as hell, i will dab seal the wire exit point

Oh, I am a bit ticked that I didnt get the longer strip, but eh, oh well.

the reflector is replaced with a amber led wired to the turn, I may rewire to the running, see how i feel in a week

I buried a small red led deep in the shell, seen from staight on, I was trying for a devil eyes. photographed from straight on, all the camera sees is glare, use your imagination ;-) they are wired to the fogs, I just will not run wire and put a switch in the dash. gotta draw the line somewhere
 

Attachments

  • shell1.webp
    shell1.webp
    101.5 KB · Views: 223
  • reassy.webp
    reassy.webp
    74.7 KB · Views: 210
  • wireout.webp
    wireout.webp
    32 KB · Views: 217
  • closeup.webp
    closeup.webp
    46.7 KB · Views: 232
  • audieffect.webp
    audieffect.webp
    40.8 KB · Views: 292
Last edited:
looks cool, but shouldn't you have put them on the bottom half of the headlight? they look abit out of place on the top.
 
not my cup of tea, but if you like it than thats all that matters. But I get the same with my angel eyes. Alot of people dont like them, but I like them so thats all that matters.
 
oh btw the hole you drilled to get the wires through, might want to silicone that so moisture doesn't get in otherwise it's gonna cloud the inside and you'll have to take them apart again.
 
definitely need longer led strip....and personally, i wouldn't of put the red led in there.....with the blue led strip AND the red....a cop may just stop you for having those two colors up front.... i will say that it looks better than the led strips that are installed on the outside of the headlamps....
 
definitely need longer led strip....and personally, i wouldn't of put the red led in there.....with the blue led strip AND the red....a cop may just stop you for having those two colors up front.... i will say that it looks better than the led strips that are installed on the outside of the headlamps....

They are cool white, but this was the only pic I had that wasn't a bunch of glare

but yeah, the red is a minor no go
 
oh btw the hole you drilled to get the wires through, might want to silicone that so moisture doesn't get in otherwise it's gonna cloud the inside and you'll have to take them apart again.

poppin the headlights apart is really not that bad, we will see after I have to drive thru the next tampa thunderstorm how well I resealed, but I am confident. When it gets about 2pm, hot as hell, i will dab seal the wire exit point
 
not my cup of tea, but if you like it than thats all that matters. But I get the same with my angel eyes. Alot of people dont like them, but I like them so thats all that matters.

The lights are just really a gee gaw thing for me, 90% of why I did the work was to black em out
 
Back