Radiator pipe leaking???

[03 Pro ES]

Ok i have a problem and it seems like it is a metal pipe that runs with the radiator lines. It smells like radiator fluid and its like a tiny pin size hole. Really don't know how i would go about fixing it. I checked my radiator fluid and it is full so not much fluid is leaking out of the small pin size hole. Maybe jb weld or something? But when i turn the car on it squirts on the header and that causes it to smoke. Really looking on some info on replacing that piece or a quick fix. Any info is very much appreciated.

This first picture is a shot of where the line goes behind the header. Connects from the hose on the right part of the picture to a metal piece on the left of the picture.

The second pic is closer showing the spot where it has been squirting from.

 

[03 Pro ES]

No one???

 

[03 Pro ES]

??

 

[concept]

JB weld might work. Just make sure you clean the pipe with a paper towel dampened with acetone or alcohol (when the pipe is cool, of course). Then abrade a bit around the hole with wet&dry paper - maybe 150-200 grit. Wipe again with the cleaner and then apply the JB Weld. As you probably know, wait until it is completely dry before starting your engine.

 

[03 Pro ES]

yeah i think i am going to attempt that tomorrow, but will jb weld hold?

 

[dmention7]

JB weld should hold, as long as you have a well-prepared surface, allow plenty of curing time, and cover the hole well.

 

[03 Pro ES]

alright i think i will attempt to patch it up tomorrow. Thanks for the info guys. will let you know how it goes.

 

[J_Naoto]

i just saw this thread.. did it work?