msp speaker question
Does anyone know what size speaker was used on the rear decklid when the factory kenwood sub box and amp is installed in the trunk. My 6x9 rockfords are now too deep to fit in the mounting holes because the box sets right under it
I had the same problem and I was hitting fuel cut, the dsm guys eliminate this by going to a maf translator and a 3in gm maf I'm not 100 percent sure if it will work for mazdas but I ended up going with bigger injectors to bring up afr
I experienced a rough isle so I thought I would check timing and I found the idle side of my belt loose so I rolled cylinder 1 to top dead center and my timing was two teeth off. To my knowledge the spring has never been removed the tensioner bolt was loose and then rolled around until the...
Perfect thank you, how about the timing belt loosening up on its own. I'm thinking bad tensioner but its tight after I time the engine then works itself loose
Ok I figured it out, the injectors that I was provided with the car are different than the oem injectors so I was hitting fuel cut, I took the set out of my 03 and put em in now she's running good. Any ideas on where I could get a set of injectors for a msp
This is just sitting in the car revving it it will not idle if I disconnect the maf and it cuts out at 4k. I do not have a gauge installed but I will put one in today and give you an update
Just got my 03.5 msp together today after having the head rebuilt, I bought the car as a basket case and used my 2003 msp as kind of a guide for a visual aide. She started right up but would not idle very well. Then if I bring up the rpms slowly I can rev it past 4k with not prob but if I...