Recent content by street_heatMSP

i dunno if there is or not. i know mine isn't. it's ebay. it only has a horn button with the bride logo and that's it. it looks nice though and is comfortable.

do you have stock motor mounts?

i know that you guys are running a blowthrough setup on the MAF i was just wondering...do our cars have a 2 bar maf?i'm throwing on a stock srt4 ic and sprayer, and my shop is making my pipes. i dont want to relocate maf if it's anything less than 2 bar. i have heard that relocating and then...

i have a Bride wheel as well. i have just an ebay quick release, they are all a 6 bolt pattern. i can't tell from your post if you know exactly how it works, but the quick mrelease and the actual adapter hub are 2 seperate pieces. the adapter hub bolts onto the steering shaft, and the quick...

yeah, i've had it hit the bumper a few times but i've never had it show any sign of damage. the worst that's ever happened is that i had to wipe carbon off the skirt. there have been some serious ones where i'll get about 10 seconds worth of continuous flame 3 to 8 feet out the back of the car...

alot of companies make a flamthrower kit that you only have to wire it in much like i did and it uses a relay box so it only takes every other spark, and all kinds of other methods so the flame is bigger, but they range in price from $45 or so all the way up to $150. For 3 bucks, i think my...

you need- *long plug wire, usually from a v8 *ignition coil, mine was from an F22 Accord motor *spark plug *12 gauge wire *switch -you tap the signal wire going into one of your ignition coils, and run it to your switch. -run the other lead of the switch to the negative (-) side of your extra...

hahah yeah, i'm pretty sure it's something they wouldn't approve of.

i know i only have one picture of it, but i'll get some videos up online so you can check it out. i know it's basically a worthless mod, but it was fun to do with some spare parts from my friend's Accord motor swap. let me know what you think.

i purchased those lights, only out of necessity i cracked a stocker. they fit great, and they dont leak at all. i like the way they turned out on mine.

definately a worthwhile trip, had ALOT of fun on all the back roads, also very scenic. sorry i had to skip out on dinner, next time i'll be there.

i'll be there, unfortunately no exhaust on the car but... it'll be loud but i definately want to take part.

i've seen a yellow msp in west chester/downingtown pa area. i assume he works at the downington tollbooth off of 276. also at the wawa on 100, and on 100 a bit farther north. i think it's the same car, pinstripe on the side. i go to UTi right there, any idea who it is?

i'm looking for slotted/drilled rotors for the car, and i've been doing alot of reading in here but i'm a little lost. i know the 626 v6 rotors fit the front, but what year v6? any year? and will these rotors fit...

i'll be there, interested in joining as well.