Recent content by rustyschopshop

  1. R

    idle probs

    atx = automatic tranny mtx = manual tranny there is a different tps for each tranny
  2. R

    idle probs

    did you change your throttle position sensor. I am sure you can adjust the idle screw to calm the idle down some but I am betting the real cure would be installing a mtx tps.
  3. R

    Why group 1st n 2nd gens together????

    I bet there are more than three. I bet there would be more on here if the site was a little more friendly for the 1st and 2nd gens, well I mean in regards for finding topics for our personal cars.
  4. R

    Why group 1st n 2nd gens together????

    Even though I am a newbie, I say we ditch the lumped section and just start 2 new forums seperating the 1st and 2nd gens. There are too many different things between the generations to keep them together. This would help to prevent alot of newb questions. It is nearely impossible to find your...
  5. R

    Restore Headlights - get rid of the yellow

    Do not bake the headlights, they will yellow much faster. Unless you have a crack or some type of leak in the headlight all the oxidation will be on the outside of the lens. Like the one guy said wet sanding then polishing is the best method. I use: 600 800 1000 1500 2000 then 3m plastic cleaner...
  6. R

    I am looking for a header for a 1.5

    mazdaspeed used to make one that corksport used to carry. So there was actually one made. Now for the hard part. Trying to find a used one some place, weather that be salvage or protege owner that has one. I really want one bad. Maybe if we could get enough people together to show a demand for...
  7. R

    newbe - 1.5 down pipe to replace cat

    I just reread the thread and noticed my mistake. You are right Joesturbo.. That is just a pipe to replace after that cat to the mid pipe. I guess I won't goes this route afterall. I guess I may have to have my exhuast guy make something for me. I am sure he can come up with something for me...
  8. R

    newbe - 1.5 down pipe to replace cat

    Let me know how this works out for ya, I bet that should flow pretty good. I was thinking of going this route and installing a high flow cat in place of the second cat. Probably a magnaflow carsound like I have used on previous cars. Then moving the 02 sensor downstream a little.
  9. R

    Headlights

    www.corksport.com has access to new jdm crystals that will work on the second gens
Back