Recent content by OrangeAppeal

As the above states - I need a properly working head with cams and cam caps (to keep the cams in place) for my 03 Mazdaspeed Protege. Need something reasonably priced...can you help? Thanks in advance.

???

Each day I drove/drive it conditions deteriorated. Started getting stumbling/bucking around 2500 rpm as well as 3000 rpm...sometimes they blend into eachother. Late last week, car started missing at low rpms (could hear it missing) and would accellerate worth crap. Then I therw the...

No issue here...i cannot blow into that hose.

03 MSP - no mods - only a boost gage Car idles fine, but as I accellerate, it cuts out between 2850 and 3000 rpm continuously, but clears up between 3100 and 3200. It will continue to accelerate to 5000-6000, but sluggishly. Happens in all gears. I recently rebuilt my engine. Plugs and...

I meant to ask what size the nut is that holds on the oil cooler...so, what size socket do I need to remove the oil cooler?

Swapping parts from my old block to the "new" block...need to know what size the bolt is that holds on the oil cooler??? Thanks, Jesse INFO: Definately a 29mm deep socket to remove the nut that holds the oil cooler to the block. Additional Info: For anyone who is trying to figure out how...

Looking for the torque specs and sequencing for rebuilding my block...can someone lead me in the right direction? Ideally I would like a source for all torque specs for the block, but at hand I need the Rod Bolts, crank braces (what holds the crank bearings in place), the crank girdle, oil...

In need of 1 Piston & Rod for my FS 2.0l '03 motor. Was shipped 4, with one bad piston, and have been promised a replacement for the last 2 weeks with nothing to show. Can anyone help me out? Thanks

Need the following bolts for my 03 MS Protege: Oil Pan Bolts Crank Girdle Bolts Located in Northeast CT. Thanks, Jesse

I am in need of Pistons & Rods for my 03 MS Protege. Need them as cheap as possible. Just trying to keep my car on the road as cheaply as I can - we have a baby in the house now, and the wife still isn't working full time. All help is appreciated. Thanks! Located in Northeast CT. Feel free...

Need a 2.0L bottom end for my protege. Preferrably in Northeast US. Just need a bottom end, but will get a whole engine if necessary. Am just trying to keep my car running, my wife and I just had our first baby 8 weeks ago. Alternative - Also looking for any reliable/reasonably priced...

Hole in the block - i need a whole block(nana)

he's using the engine, but thanks for the lead

Wondering if anyone in the northeast can help me out. Please see this thread http://www.mazdas247.com/forum/showthread.php?t=123744500