Recent content by Loader

You're probably rubbing the fender liner. 850lbs of human is a lot of human, haha. It shouldn't happen too often, 235's clear fine especially with such a high offset.

a 245 series tire is too wide to fit on the stock 7.5" width.

It startles me because you just have the basic bolt-ons. AHH!

I'm looking for a used testpipe because I do not like mine, haha. Let me know what you have with price as well. I'm paypal ready!

I have my rear struts as low as they can go. To adjust them, you have to loosen the locking nut, the grab the strut with both hands and rotate clockwise to lower it. Once you are at the desired strut height, tighten the locking not. No clunking noise whatsoever.

I have the rear struts and springs spun all the way down. Is this not even? I checked and both are spun down to the max, with the lower locking ring still on the spring.

yeah i will check the swaybar, it sounds like its bouncing back and forth/up and down, i am not too sure. As for as the shock height+spring height, its the rear strut/spring. I have it on the lowest setting without the locking ring removed, identical on both sides.

Hey guys, I've been trying to find this clunk in the rear of my car. I recently installed BC Coilovers this past weekend and everything went smoothly. All the bolts were tightened and I even triple checked. The clunking noise only happens when driving under 40mph. I crawl under the car and check...

Hey guys, I've been trying to find this clunk in the rear of my car. I recently installed BC Coilovers this past weekend and everything went smoothly. All the bolts were tightened and I even triple checked. The clunking noise only happens when driving under 40mph. I crawl under the car and check...

Anyone that has BC Coilovers, do the rear struts come with damper adjustment knobs? I bought a set off a member but the knobs weren't included. I don't want to bug him if knobs never came with them. I just don't know what to do to adjust them if there aren't any knobs....

Let me know if you guys have any! Pm me a price and we can work something out.

Hey guys, I am currently looking for a titanium shift knob, either Aspec of Arc, ball style. If anyone has one, pm me!