Recent content by ghettospeed

  1. G

    HELP!!!!!!All-wheel drive broken?

    Theoretically, with the Haldex controller it will allow you to have oversteer. ;) Yay durifuto spektakulaH! ;)
  2. G

    HELP!!!!!!All-wheel drive broken?

    Uh, you were driving on wet leaves, there was prlly a sudden power transfer during full boost from one side of the rear to the other, that will decimate the axles.. Good news is that the diff is stout (supposedly same unit in the rx8, so its pretty tough). Honestly, I would be somewhat...
  3. G

    Mazdaspeed6 "Lack of power" Recall??

    Although I am just speculating, it seems like Mazda has a bad bad habit of making the accell enrichment waaaayyy too rich. Even on the 2.3 SVOs from the 80s, they ran absolutely pig rich. On my other car with a standalone, I can simulate the way the MS6 feels by cranking up the AE. What happens...
  4. G

    2.3 after market camshaft and Manifold

    http://www.cosworth.com/shop_range.php?typeid=10 Here is the cam page...
  5. G

    2.3 after market camshaft and Manifold

    Cosworth.. Nuff said. ;) Not cheap, BUT, any company that can give you a 300hp 11k rpm crate motor I would trust with my life. http://www.cosworth.com/shop_range.php?row=6&f_id=&level=2&typeid=40 Look at that HP300, and imagine that monster with low compression pistons, churning 11k and...
  6. G

    Adjusting the clutch pedal (works great)

    Uh, fellas, I wouldn't do this... Unless you check the movement of the slave solenoid and can verify that it moves exactly the same amount as before, I would be very conservative with how much you shorten the plunger. If you shorten it too much, it will put the clutch into a place where its not...
Back