Recent content by Garlandimports8

Will try the seafoam this weekend. Put one new coil and new wires on last weekend. Autozone only had one in stock. Will have to search for another this weekend. Are there any cons with using the seafoam? Heard about it but never tried it.

Thanks pcb! I'm not to worried about the light. More worried if the valve is bent, and even more worried if it's going to leave me stranded late at night on the side of the highway again. The only time I can feel the miss is while sitting at idle, It idles rough between 500-800rpm. Once i start...

Got off early today. Went to a buddies shop, Compression is good. Thinking maybe when the timing belt broke it screwed up the crank sensor. If it isn't that then I don't know what the random miss could be. Engine light came back on today code P0300 is what it's throwing.

That's what I thought also. Maybe the previous owner put an 03 front bumper on it. Then again that would not explain why there is the side marker harness plug on each side of the vehicle.

Replaced plugs with NGK laser, Put new coil packs and wires today. Raised the throttle to 1k, was stumbling between 300-500. Runs a little better but can still feel the shake in the engine. Reset the ecu, no engine light yet. After reading the forums and timing belt changes. Sounds like the...

Well.. Good and bad news for the P5. They put a new timing belt on. Started right up. Saw the old belt, It was missing about 15 teeth here and there. Started right up but runs like s*** at idle. Feels like a miss fire. So i am guess there is a bent valve. Which would be cheaper and better to do...

Ended up just wiring them to the side marker lights. I guess whoever owned the car before me, must of cut off the wire harness for the fog lamps.

Watched the noob video, used the search bar, couldn't find what I was looking for. So here goes. Bought my P5 Thursday. I spent hours going through the vehicle and checking everything out. Tried turning the fog lamps on, jacked the car up, got under there, and the fog lamp plugs are hanging from...

Yeah, I've heard great things about them. Always liked the sporty look of them. Dropped it at a shop I use, They said the cams and valves look fine, No teeth on the belt, looks like the tensioner might of broke. They will be putting a new belt kit on it. Hoping that fixes it and I don't have to...

You were right, they don't move. Thanks for the help

My Honda was stolen 2 weeks ago, nothing special about it, when I got it back it was completely stripped. Found a 02 Mazda Protege5 for 3800. Jumped on it. Bought it last Thursday. Last night after I left work. It lost power pulled to the shoulder and it shut off. Tried starting it, doesn't...