Recent content by BaD_HeX

Pretty sure a 2.0 kit would fit a 1.8 still.

Well that sucks. CF isn't so bad I guess. (uhm)

Buy from a forum vendor. I got a TechOne kit from Protephile for pretty cheap, and they are nice.

You owned this thing?: http://www.treehugger.com/files/2007/02/led_bulb_replac.php

There is always LED bulbs. I was at a friend's house the other day talking about this. They make a 150 LED bulb that draws 9w and outputs equivalent to a 70w bulb. It's $80(us), but, using it 8 hours every day, will last ~30 years. That cost will come down in the future, so this will be a pretty...

I think what you circled is the connector to the Power Steering Pressure Switch. This part watches the pressure in your PSP and causes the car to increase its RPMs at idle when it detects above normal pressure. You will also get a CEL if this switch isn't working correctly. If the fluid is...

I need the outer shell of the driver's side door that fits a 00 protege sedan. The rust monster played a nasty trick this winter and it looks like the door needs to go.

3m citris based adhesive remover. Won't screw up your paint. I use it for getting off any kind of sticker/adhesive. +1 for the heavy duty 3m tape. My front plate is held on by this stuff (going on 2 years).

I used to get water in my trunk. I figured out it was coming from the plastic pop clip post, in the upper corner of the taillight (the part where there is no screw). Used a little silicone on both sides and haven’t had a drop since then.

3m Double-sided tape.

I have a lowered N/A protege with a CAI that I leave on year round. We get every kind of weather here in northern IL. I have a sport-20 kit on my sedan so the splash guards don't meet up perfect with the bumper. I have a dryflow air filter on and I've never seen it get wet at all. You have to be...

If it's not too much trouble pics would be great. No big deal if you're as lazy as me tho. :)

:) I have mine on the car. It's snowing over here tho so pictures wouldn't be very good. Maybe at lunch time I'll snap one or two. Still need to get the 194 bulbs working. How did you wire them? I was planning on getting a few single post connectors and plugging it into the nice square plug they...

I had this same issue. It was an aftermarket battery connector that was grounding out on the hood of the car. Whenever I would pull into the driveway and hit a big bump it would kill my engine like I turned the key off and back on really quick.

I havn't put them on the car yet. I have yet to look really hard for a connector. I will probably just buy some single post connectors that will fit the metal posts on the back of the light and splice onto the parking lights when I put them on the car.