-
-
SSilentnoise713 replied to the thread Failed Brake JobOn cars with EPB, I think damage occur if you try to retract the piston WITHOUT turning EPB off. In your case, you simple extended the...
-
SSilentnoise713 replied to the thread Truth regarding towing with the Mazda5?Search old treads for detail discussions. -US Mz5 is not rated to tow BUT overseas is rated for ~1500lbs -Rear shocks blow easily (kyb...
-
SSilentnoise713 replied to the thread Rear Passenger Door Won't Fully CloseWhat you described matches what my '08 started experiencing for the first time last winter. It only happens when it gets below ~40; I...
-
SI had HID in my 2007 and they were AWESOME. Pushing light down the road. everything I have read that daniel the "expert" say is crap is...
-
SSilentnoise713 replied to the thread Need Alignment helpYeah, that is the first "red" flag. They should at least be able to get toe dialed in to be closer in value. I find it is helpful if...
-
SSilentnoise713 replied to the thread LED Headlights in a Mazda5?Dropping HID/LED into halogen reflector headlights is the big no-no but Mazda uses a projector lens that is the x-factor (Daniel Stern...
-
SNope, no PWM in Mazdas. And also no burnt bulb checking, so no need for any resistor/canbus thingys.
-
SSilentnoise713 replied to the thread Need Alignment helpFront: Lift the front high enough to relieve spring preload, loosen the top 3 mounting bolts and have someone apply pressure pushing in...
-
SSilentnoise713 replied to the thread Help me identify this Mazda5(?) modelLooks like a Franken swap. Very common with cars that share the same chassis/generations. Suspect they had to swap fenders to fit the...
-
-
-
Loading…
-
Loading…
-
Loading…
