Recent content by 2 D MAX

My rear seat on the passenger side pops in and out. Same problem as yours, makes a thud.

Run a relay using the signal off the dome light

1. Marashka - 4 Rotors (CD/S) 4 Axxis pads 2. AFaceInTheCrowd - 4 Rotors (CD) 4 Axxis pads 3. Orangezoom - 4 Rotors (CD/S) 4 Axxis Pads 4. 2K3 MSP - 4 Rotors (CD/S) 4 Axxis pads 5. BoOsTiN - 4 Rotors ( CD/S) 4 Axxis pads 6. Dexter - 4 Rotors (Can i just get slotted? If not, CD/S) no pads, kthx...

I'm running them off and JL amp and they sound way better. How long they will last I have no clue but when they do die I will replace them with some JL components.

Do the install yourself. I put in an AEM on my car and it was an easy install. If need help PM me.

500 for an injen. thats insane, i was quoted just over 400. Then I opted for the AEM which was half the price. Before you buy anything for your car check with MOPAC first. Most tuner companies buy their stuff through MOPAC and then add 50-60 bucks. I learned this the hard way when I payed...

Yep, most likely I will be there. Were about's is the nordic centre.

Like I mentioned before we have included many add-ins that are not even considered in the home made setups. One of which is to prevent the sprayers from leaking and actually keeping the water in the tank until it needs to be sprayed.

Any tuning shop will be able to do it. For what you will be paying you might as well try to put it in yourself. Relatively easy install, if you got the tools

The reason why this system is at the price it is, is because there are extra add ins that other systems don't have. Our system does not leak everywhere. Also it comes with a circuit board that monitors when to turn the sprayers on. As mentioned before the system only turns on when you really...

This will work for any intercooler. Were waiting for final prices on all the pieces but right now it should be around 130 US plus shipping

As the title says I am wondering if anyone would be interested in an intercooler sprayer. We installed it on my car today and have noticed pretty good gains. The boost now spikes to 9 psi and drops off to 6 or so. There is no need to use the factory windshield bottle and wipers. The system...

Here in Calgary a box like that costs twice what were charging. That is one of the reasons I decided to make my own. The box will come either painted or carpeted.

Here is the fibreglass box that I made for my MSP. It fits behind the wheelwell and the rear tail light, taking up very minimal space. We are currently producing these enclosures for sale at a price of 350 US, plus shipping The box will only hold a 10 inch sub, due to the reduced volume...