-
-
NNevada CX5 reacted to N7turbo's post in the thread Seeking advice regarding hard clunk from transmission with
Like.
To be clear, are you throwing it into drive during the 30-second high idle? Can you confirm which gears you are using? -
NNevada CX5 replied to the thread DIY Upgrade CX-5 Bose tweetersNice cap.
-
NNevada CX5 replied to the thread Intake for added turbo soundsMy car has 66000 miles, and the Dryflow has been in use the from the first 500 miles to date. I recall the intake sounding louder and...
-
NNevada CX5 replied to the thread Intake for added turbo soundsI have been very happy with the Dryflow. I also popped out the plastic restrictor that surrounds the lower hood latch. This is the...
-
NNevada CX5 replied to the thread What have you done to your CX-5 today?Upgraded stock non Bose speakers to Infinity Reference component speakers in the front with door deadening mat. Huge improvement in sound.
-
NNevada CX5 replied to the thread Grounding Cylinder Head Test Results (2024 CX-5 Turbo)Here is the other obvious grounding point, where the 2 factory wires are attached.
-
-
NNevada CX5 replied to the thread CX-5 NA Head Cracks...Ever figure out which ones affected?Yes, the dealer verbally said porous casting. It cost me $3200 with dealer and Mazda discounts.
-
NNevada CX5 replied to the thread CX-5 NA Head Cracks...Ever figure out which ones affected?I was able to confirm with my dealer that the replacement cylinder head that was installed on my 2018 is a redesigned part to correct...
-
NNevada CX5 replied to the thread Grounding Cylinder Head Test Results (2024 CX-5 Turbo)The chassis steel and welds are not great conductors. Thick copper wire has much lower resistance. When connected to well chosen...
-
NNevada CX5 reacted to CrazyHippie's post in the thread Grounding Cylinder Head Test Results (2024 CX-5 Turbo) with Like.
I ordered a 24-inch double ring 4-gauge wire. Once I install it and see how the length works, I'll order another. I like to tinker too...
-
NNevada CX5 replied to the thread Grounding Cylinder Head Test Results (2024 CX-5 Turbo)You really want to bolt the wire, just clipping it is not a good connection.
-
-
Loading…
-
Loading…
-
Loading…
