-
-
JJmaz replied to the thread 2017~2025 CX-5 Original Front Brakes, Outside Pads No Wear, Inside Finished?The guy at the parts store (always a source of trusted professional wisdom ---sarc) was half right in the sense that there's sufficient...
-
JJmaz replied to the thread 2017~2025 CX-5 Original Front Brakes, Outside Pads No Wear, Inside Finished?The threaded hole in the rotor typically takes a M8-1.25 bolt (8mm diameter with 1.25mm thread pitch)to act as a "jack screw" to loosen...
-
JJmaz reacted to HyFlyer's post in the thread 2017~2025 CX-5 Original Front Brakes, Outside Pads No Wear, Inside Finished? with
Like.
There's a small M8-1.25 threaded bolt hole (8mm diameter with 1.25mm thread pitch) on the rotor "hat" that you run a bolt into to help... -
JJmaz reacted to RL911's post in the thread Oil filter change and recommended filter cap wrench with Like.
I use this, perfect fit. Hand tighten, then maybe 1/4-1/2 turn. CTA Tools A255 Cap-Type Oil Filter Wrench - 65/67mm x 14 Flute -...
-
JJmaz replied to the thread Mazda OEM Parts OES Supplier?Are you planning on replacing the ball joints only (they press in) or the control arm which comes with LBJ and new bushings. Can't...
-
JJmaz replied to the thread Oil filter change and recommended filter cap wrenchThe OP might consider visiting an auto parts store with the intended filter and purchase a decent Lisle brand cup wrench. The cheap...
-
JJmaz replied to the thread Mazda OEM Parts OES Supplier?I don't know the OEM suppliers for Mazda. But after replacing the lower control arms with OEM Mazda I went aftermarket with Sankei555...
-
JJmaz replied to the thread Is a NAPA Gold #7002 oil filter OK for NA 2019 CX-5?After using Mobil 1 and Fram Ultra oil filters, I've settled on Purolator ONE. High filtration efficiency and semi synthetic filter...
-
JJmaz reacted to theblooms's post in the thread What in the world is going on here? Edit: Fixed! with Like.
GOT IT! It's been raining non-stop for the last week, and honestly, this isn't the first time I've had this symptom, we had it earlier...
-
JJmaz reacted to cz5gt's post in the thread How many Drain & Fills before full transmission/filter service? with Like.
Mazda sells the filter and a new pan (its not expensive) but there is no full kit with gasket etc that is oem. Mazda docs point to use...
-
JJmaz replied to the thread How many Drain & Fills before full transmission/filter service?As mentioned above there are many threads dealing with transmission service. Here's my thoughts for dealing with this in the here and...
-
JJmaz replied to the thread Looking for credible place to buy Mazda air filters online or ebayI just posted it because I came across it and it looked interesting. There's always other filter tests out there with probably different...
-
JJmaz reacted to HyFlyer's post in the thread Looking for credible place to buy Mazda air filters online or ebay with Like.
$20.56 at Jake Sweeney Mazda Cincinnati https://parts.jakesweeneymazda.com/p/105508688/PE07-13-3A0A.html They beat all the other...
-
JJmaz replied to the thread Looking for credible place to buy Mazda air filters online or ebayThanks. I just looked them up (Toyota and Mazda of North Miami) both have the same dealer principal so it looks legit. I think that just...
-
JJmaz reacted to stickerbush's post in the thread Looking for credible place to buy Mazda air filters online or ebay with Like.
Shipping is free for orders over $100. If doing your own service it shouldn't be hard to put together an order of air filters, oil...
-
-
Loading…
-
Loading…
-
Loading…
