What have you done to your CX-5 today?

JDM Rear Headrest - They came in today.
D7kYJwI.jpg
 
I drove around for so long just hearing the turboh lol. I'll make a better video with my amk5000 later. No smoke (from what I can tell) and exhasut leak at the exhaust connetion (need a proper gasket). Still became very audible at 3000 rpm with the wg ~ half open (not charged to engine atm)

 
Its stiffer but I love how it corners better vs stock.

Could be all in my head but will be able to tell you more when they settle in in abt 1 week

Please do. Send me a pm or post up a review in the suspension section. I'm considering getting the HR springs within the next year
 
Bought the cargo tray for the trunk. I have a german shepherd that likes to shed and get muddy. Should make clean up and hair removal much easier.
 
Today, for my CX-5... I put air in my tires.

Almost two years in on my car and just over 10,000 miles (I work from home). Wife and I went on a two hour trip yesterday, and just before we arrived at our destination there was a loud beep. Scared the carp out of me. It was the tire pressure monitor. Checked the pressure and all tires seemed down around 30 psi, so not too bad. I'm embarrassed to say that I've never checked the pressure myself, though you think the dealer would have when I had my oil changed last month.

Back home this morning, I fired up the compressor, brought all tires up to 34 psi and reset the TPMS.

By the way, my car came from the dealer with nitrogen in the tires, or so they say. A feature not really worth it, according to this article.
 
Nice picture.
My car won't see terrain for sure. Mine, is a compact urban vehicle(CUV) :)
 
Last edited:
I took off the winter wheels, lubed my caliper pins (backs seemed fine, front were a little sparse), installed my 20mm spacers after I painted the outer edges black, and put the 19's back on. I love the look of the 19's with a more flush appearance!
 
I took off the winter wheels, lubed my caliper pins (backs seemed fine, front were a little sparse), installed my 20mm spacers after I painted the outer edges black, and put the 19's back on. I love the look of the 19's with a more flush appearance!

Pics or it didn't happen
 

New Threads and Articles

Back