yay!!
Mazda of the Month | ENTER NOW for February!
- Thread starter Antoine
- Start date
- Status
yay!!
We need more entries
I'll play..
Bonks
Gray Schilling
2003 Mazdaspeed Protege
Interior
Custom dual gauge surround (made by a M247 forum member)
AEM Wideband o2
Grip Royal 'Royal Grain' 355mm mahogany steering wheel
NRG steering hub adapter w/custom steering wheel spacer
Custom horn connector
Custom turn signal disengage
Sparco horn button
Custom shift boot (made by a M247 forum member)
Kenwood headunit
Wiper delete
You have a sexy interior though. Go for it. We need more entries
Just read this.. I guess I'm too late..
Thread is still open. Go for it.
Herblenny
Phil Sohn
1993 Mazda RX-7, 20B-REW three-rotor
Engine Modifications Shaved bay with satin finish paint by Goolsby Customs, Define Autowork three-rotor engine mounts, Mazdaspeed powerplant frame, complete engine refresh, mild port, and balancing by Luis Canizales; MPFab custom 321SS bottom-mount turbo manifold, custom downpipe, custom V-mount intercooler setup with Bell Intercooler cores and alternator relocation; Mazmart upgraded billet water pump, prototype Xcessive Engineering three-rotor LIM and fuel rails; Injector Dynamics 1000cc injectors, AEM ignition coils, Setrab oil coolers with Mocal thermostat, Tial MVR wastegate and BOV; Turbonetics GT-K 1050 billet wheel turbocharger, Ludwig Motorsport mil-spec engine wiring and engine accessory harnesses; CJ Motorsport fuel pump kit, Radium Auto multi-pump surge tank (2x Walbro E85 pumps), Denso Cosmo in-tank fuel pump, Ganador Titanium cat-back exhaust
Engine Management Haltech PS2000
Drivetrain Exedy Twin carbon clutch kit, carbon-fiber driveshaft
Wheels, Tires & Brakes Rays Engineering Volk TE37SL Black Edition 18x9.5’’ (f) and 18x10.5 (r) wheels and Duralumin lug nuts; Toyo Proxes R888 255/35R18 (f) and 295/30R18 (r) tires, DBA 332mm rotors with custom hats by E&J Auto, Alcon 4-piston calipers (f), RZ calipers (r), Chase Bays manual brake kit with prop valve
Suspension Stance USA Pro III coilovers, Tri-point Engineering adjustable sway bar (f), Widefoot Engineering solid sway bar mounts, Racing Beat sway bar (r), FEED fender braces, Nagisa strut tower to firewall brace, Powerflex bushings, AutoExe underbody bracing, Raceshop rollbar/rear strut tower bracing, transmission and diff brace, AtomicRex manual steering rack
Exterior BASF Glasurit paint in AMG Imola Grey Metallic, paint and body work by Goolsby Customs, RE-Amemiya N1-02 front bumper, N1 carbon undertray, N1 carbon canards, N1 carbon hood, carbon fender mirrors, and carbon diffuser; FEED front fenders, rear fender flares, carbon side skirts, and carbon GT-IIR rear wing; ShineAuto rear carbon lip spoiler, FAL rear hatch window, new front windshield, trim, and door seals; custom vented signal lights, R-Magic HID headlights, custom converted taillights
Interior Defi Super Sport gauge cluster, Bride Exas III seats (f) and fabric-covered JDM seats (r); Raceshop rollbar, Takata Drift III harnesses, Prosport Premium gauges, FEED shift knob and doorsills; Works Bell short hub, QR, and lock; Personal steering wheel, interior conversion from Tan to Black, simplified AC and shifter panel with satin paint by Goolsby Customs
Interior
Engine Bay
Exterior
Phil Sohn
1993 Mazda RX-7, 20B-REW three-rotor
Engine Modifications Shaved bay with satin finish paint by Goolsby Customs, Define Autowork three-rotor engine mounts, Mazdaspeed powerplant frame, complete engine refresh, mild port, and balancing by Luis Canizales; MPFab custom 321SS bottom-mount turbo manifold, custom downpipe, custom V-mount intercooler setup with Bell Intercooler cores and alternator relocation; Mazmart upgraded billet water pump, prototype Xcessive Engineering three-rotor LIM and fuel rails; Injector Dynamics 1000cc injectors, AEM ignition coils, Setrab oil coolers with Mocal thermostat, Tial MVR wastegate and BOV; Turbonetics GT-K 1050 billet wheel turbocharger, Ludwig Motorsport mil-spec engine wiring and engine accessory harnesses; CJ Motorsport fuel pump kit, Radium Auto multi-pump surge tank (2x Walbro E85 pumps), Denso Cosmo in-tank fuel pump, Ganador Titanium cat-back exhaust
Engine Management Haltech PS2000
Drivetrain Exedy Twin carbon clutch kit, carbon-fiber driveshaft
Wheels, Tires & Brakes Rays Engineering Volk TE37SL Black Edition 18x9.5’’ (f) and 18x10.5 (r) wheels and Duralumin lug nuts; Toyo Proxes R888 255/35R18 (f) and 295/30R18 (r) tires, DBA 332mm rotors with custom hats by E&J Auto, Alcon 4-piston calipers (f), RZ calipers (r), Chase Bays manual brake kit with prop valve
Suspension Stance USA Pro III coilovers, Tri-point Engineering adjustable sway bar (f), Widefoot Engineering solid sway bar mounts, Racing Beat sway bar (r), FEED fender braces, Nagisa strut tower to firewall brace, Powerflex bushings, AutoExe underbody bracing, Raceshop rollbar/rear strut tower bracing, transmission and diff brace, AtomicRex manual steering rack
Exterior BASF Glasurit paint in AMG Imola Grey Metallic, paint and body work by Goolsby Customs, RE-Amemiya N1-02 front bumper, N1 carbon undertray, N1 carbon canards, N1 carbon hood, carbon fender mirrors, and carbon diffuser; FEED front fenders, rear fender flares, carbon side skirts, and carbon GT-IIR rear wing; ShineAuto rear carbon lip spoiler, FAL rear hatch window, new front windshield, trim, and door seals; custom vented signal lights, R-Magic HID headlights, custom converted taillights
Interior Defi Super Sport gauge cluster, Bride Exas III seats (f) and fabric-covered JDM seats (r); Raceshop rollbar, Takata Drift III harnesses, Prosport Premium gauges, FEED shift knob and doorsills; Works Bell short hub, QR, and lock; Personal steering wheel, interior conversion from Tan to Black, simplified AC and shifter panel with satin paint by Goolsby Customs
Interior
Engine Bay
Exterior
MidnightAxela
Member
- :
- 2010 Mazda 3s Hatchback
I'm sitting this round out. Sorry 
Antoine
Administrator
- Status
New Threads and Articles
-
-
-
New 2025 CX-5 with highway vibration problem; tires?- By DarkskiesIL
- Replies: 9