wtb Carbing Strut Bar

[719prottege]

Looking for a pretty rare piece, the Carbing 3 point strut bar. i know i have seen a few around here before....
hit me up if you have one

 

[2.0t03speed]

I picked mine recently off ebay. I only have the 2 point version. You can order the strut bar new from carbing but it will be over 300 to get it here

 

[pw~mp5]

I have one, new and still in the box, I also have the matching rear but they are not for sale. I got mine from No Limit Motorsport http://www.nolimitmotorsport.com, in theory any authorized Tein dealer should be able to get them, although it will be a PITA since the part numbers are not listed on the US site. It was special order through Tein. I had to wait like 3 months before it came in since it is shipped to the US when the Tein USA distributor receives their normal stock shipment.

http://www.tein.com/carbing/index.html
Front http://www.carbing.co.jp/international/products/strut/detail/6424080.shtml
Rear http://www.carbing.co.jp/international/products/strut/detail/6644080.shtml

Note the front bar has the master cylinder brace which will need to be cut off to fit left hand drive cars.

 

[719prottege]

cool thanks for the info guys. i want the 3 point if i can get ahold of one

 

[2.0t03speed]

Jesus to buy one new is 450usd without shipping to the us

 

[pw~mp5]

The prices were a little lower than what is showing on the Japanese site. The US price back in January 2011 was $380 for the front and $240 for the rear and I got free shipping.

 

[719prottege]

is this the same one? http://www.rhdjapan.com/okuyama-carbing-strut-tower-bar-front-aluminum-group-2-56779 it has 3 part numbers for ours, im guessing its the one that says BJFW or something like that?

 

[pw~mp5]

Yes, CA 642 408 0 is the one for our car, but you will need to cut off the master cylinder brace.

 

[2.0t03speed]

still 380 for a strut bar is crazy

 

[719prottege]

Yes, CA 642 408 0 is the one for our car, but you will need to cut off the master cylinder brace.

cool.