thought I would drop some of these pictures for those wanting a little pictorial guidance in some common front end work.
first let's start with the bumper.
Next is the steps required to remove the bumper from the clips mounting it to the fenders
viola, all your front end widgets and tom-foolery are exposed. Swap fog lights, add sweet red car horns, dangle stuffed animals, ect.
if you thought "hey I want to paint my badges but I don't want to tape them off." then here is how the front badge pops out (flat head screwdriver used to press the clips)
and
lastly those ambers
leave your car somewhere that a 30 foot extension ladder could possibly fall from a height of, near, or around 15 feet. Now this requires a stroke of dumb luck, and just perfect timing. but here is what it should look like
Now that is done, remove the headlight via the two last bolts and shake all the nonsense out of it. Those plastic bits can be hazardous at freeway speeds
enjoy
first let's start with the bumper.
Next is the steps required to remove the bumper from the clips mounting it to the fenders
viola, all your front end widgets and tom-foolery are exposed. Swap fog lights, add sweet red car horns, dangle stuffed animals, ect.
if you thought "hey I want to paint my badges but I don't want to tape them off." then here is how the front badge pops out (flat head screwdriver used to press the clips)
and
lastly those ambers
leave your car somewhere that a 30 foot extension ladder could possibly fall from a height of, near, or around 15 feet. Now this requires a stroke of dumb luck, and just perfect timing. but here is what it should look like
Now that is done, remove the headlight via the two last bolts and shake all the nonsense out of it. Those plastic bits can be hazardous at freeway speeds
enjoy
Last edited:
