What have you done to your MSP today?

[Velocifero]

Yeah my 03.5 driver seat is all messed up, the side s*** is all broken up and coming apart. They put that money towards much better looking lips and spoiler!

That's one reason why I ended up with ms3 seats, my MSP driver seat was starting to crack at that material. I ended up trading The pro seats for some messed up tenso Rs and needed to replace those, so I got the speed 3 seats I wanted to begin with.

 

[SeR_Cyclops]

Obviously the 03.5 looks better.. I mean thats why its a .5, they improved on the original model

And my diff got me stranded at around 45k, I've been running a welded 3rd rev one for about 15k now.. If anything happens to it im going with mfactory, heard great things about it.

I have had a great experience with the MFactory. I have only had it for about 4k miles but it went in with no problems and the car feels just like stock so I cant complain.

 

[Wagonbacker9]

I have had a great experience with the MFactory. I have only had it for about 4k miles but it went in with no problems and the car feels just like stock so I cant complain.

Thats a pretty expensive "feels like stock" investment..

 

[SeR_Cyclops]

Thats a pretty expensive "feels like stock" investment..

Its no more than a NEW stock replacement. But in all honesty who can really tell that there is a aftermarket LSD. Because if you can then ill make a bet with you right now. Our stock LSD works well it is just weak.......

 

[Knox Joe]

Exactly. If it performs like stock but doesn't grenade itself I'd say it's a good design.

 

[VIPMSP]

where can i get the tabs to hold the bumper in place? (just bought nk2a's bumper sag fix) but i also need the middle ones...

 

[Dpwhitehead1]

where can i get the tabs to hold the bumper in place? (just bought nk2a's bumper sag fix) but i also need the middle ones...

probably from jason at online montgomery

 

[VIPMSP]

probably from jason at online montgomery

would you happen to know the part number?

 

[bikingpro5]

where can i get the tabs to hold the bumper in place? (just bought nk2a's bumper sag fix) but i also need the middle ones...

middle ones? i only have the sag fix holding my bumper no bolts near the headlights or under it and the bumper fits properly.

 

[VIPMSP]

middle ones? i only have the sag fix holding my bumper no bolts near the headlights or under it and the bumper fits properly.

hmm, well i guess i'll see how it looks once i install the sag fix and grille

 

[StealthWyvern]

I have had a great experience with the MFactory. I have only had it for about 4k miles but it went in with no problems and the car feels just like stock so I cant complain.

Thats a pretty expensive "feels like stock" investment..

Its no more than a NEW stock replacement. But in all honesty who can really tell that there is a aftermarket LSD. Because if you can then ill make a bet with you right now. Our stock LSD works well it is just weak.......

I love my mfactory... feels like stock but then again I never really beat on my stocker due to the fact I knew it was going to give up the ghost sooner or later. Besides to me the mfactory doesnt make the car feel better but it makes me feel better knowing i can beat the snot out of my car and not fear the diff going on me again!

 

[SeR_Cyclops]

I figured I would post this thread here to hopefully get more recognition.

It is a thread about a possible 6speed tranny. Anyone that has any knowledge chime in!

http://www.mazdas247.com/forum/showthread.php?123810258-Possible-6spd-swap-option!

 

[SCMP3]

I have.lol. asking more questions then helping.


Usps says my h3c fog replacement 3k bulbs are at home. Pretty excited to have fogs again

 

[Knox Joe]

So my damn methanol nozzle blew out of the charge pipe again today! This time it doesn't want to thread back on. FML

 

[boostedprotege]

^fail that happened to me.. what i did was have someone weld the old hole and retap a new one. never happened again

 

[hornsfan10609]

Just removed my stock flyin M and mazdaspeed emblems as I painted a regular chrome M and new mazdaspeed emblem titanium to match my car. Haven't installed them yet because they are drying.
Also replaced my turbo oil return O ring yesterday and it's ready to go to the track tomorrow morning.

 

[Knox Joe]

3" DP is on it's way. Just got shipping confirmation.

 

[Velocifero]

Just removed my stock flyin M and mazdaspeed emblems as I painted a regular chrome M and new mazdaspeed emblem titanium to match my car. Haven't installed them yet because they are drying.
Also replaced my turbo oil return O ring yesterday and it's ready to go to the track tomorrow morning.

One of my favorite things that I did to my car was body match all the badges and the "Injen" license plate surround.

 

[VIPMSP]

pulled the black MSP in the driveway, took off the bumper and removed the fogs (so i can take the pink tint off).

also received my new exhaust mani today, waiting on the new rad and then work will be underway.

 

[VIPMSP]

about to put my 03 OEM sparco shift knob up for sale once i get this new one.