What have you done to your MS3 today?
- Thread starter ZoomVT
- Start date
- :
- 06 LS MS6
07 BM GT (shell has been struck from the roll)
nigh on certainty
use a wire type tool and gap to 028
avoid putting pressure on the center wire, their delicate
those aint mah shoos
and its hilarious some stanced gti and late model si wanted to **** with me on the way home from an install meet
i was like bish i got 4 wheels in the back and im on winters......gtfo
- :
- 06 LS MS6
07 BM GT (shell has been struck from the roll)
vielen dank
jackass ;-)
I saw that, and thought,.... ah screw it
personal pronouns
Bob Dole always gets them right
Last edited:
- :
- 06 LS MS6
07 BM GT (shell has been struck from the roll)
Ah, very cool
so,
what was the ambient when you did that?
how was the synchro bite when you had it in?
- :
- 06 LS MS6
07 BM GT (shell has been struck from the roll)
hey all,
smokin a punch and sippin a barleywine, I noticed I have left my fogs alive
how much of a b**** would it be to get to the reflectors for a wee bit of flat black?
or should I just lay on a couple layers of 5% tint
or bust out my can of niteshaydes
smokin a punch and sippin a barleywine, I noticed I have left my fogs alive
how much of a b**** would it be to get to the reflectors for a wee bit of flat black?
or should I just lay on a couple layers of 5% tint
or bust out my can of niteshaydes
I still run it, I will 'til I get the Motorcraft stuff. It's notchy when it's cold. But it's much better when it's warm. In fact, in the summer, the stock stuff got notchy when it warmed up. The Synchromax is always the same. You just have to be delicate until it gets up to operating temp. Someone who drove this car stock as a DD would probably find this stuff just fine. Personally, I know there's a better product out there. And that's what I want to use.
fishdonotbounce
Registered Zombie
- :
- 08.5 CWP Speed3
Forgot to post this in here. Feel is great and I love the 175g much more than the 650g.
oaklandopen
Member
Let the wife drive her, again, because the truck is in for repairs, again. no wonder Japanese cars are better than yankee cars
- :
- 06 LS MS6
07 BM GT (shell has been struck from the roll)
cool appliques, where did you get them??
haha I painted my helmet close to BM and stuck the speed on the forehead and the 3 on the chin
take that thought a step further, and take the shifter weight off for a week or two
less mass=more feel
haha I painted my helmet close to BM and stuck the speed on the forehead and the 3 on the chin
Forgot to post this in here. Feel is great and I love the 175g much more than the 650g.
take that thought a step further, and take the shifter weight off for a week or two
less mass=more feel
fishdonotbounce
Registered Zombie
- :
- 08.5 CWP Speed3
I like where the knob is right now. I don't really remember the feel of the stock knob to compare but I feel like the setup is right for me. I don't find myself reaching to shift or anything like that.
Bingo. The previous owner took them off the hatch and put them there. I plan on taking them off when I have a chance. I like things clean and simple for the most part. That's why I didn't buy a 2nd gen. Too busy for me.
- :
- 06 LS MS6
07 BM GT (shell has been struck from the roll)
Selling???Removed my tint...
and went back to stock shift knob...
Not totally, and no not selling. Too many tint tickets. They're just hunting for me, got pulled over twice in one weekend recently. Pulled it all off, and pleading not guilty. what can i say, they got to me. as for the shift knob, i was growing much less fond of the JBR knob, too cold, sharp edges, and gear diagram won't stay on. made me miss the feel and finish of the stock one. first drive with it this morning and i don't miss the extra weight of the JBR.
