FS: ATP Downpipe - USED

[realestvin7]

I have a used MazdaSpeed6 ATP downpipe for sale. We don't have the car anymore, so it's up for sale. I no longer have the v-band module, so you'll have to find another one if you're going to use your stock turbo. I do however, still have the v-band clamp, so it will be included. I will ship if need be. Thanks.

$300 OBO

-Andrew 972 742 5155

 

[piotrekkb]

where is
V-band Module

 

[realestvin7]

where is
V-band Module

It's still on the the totaled car, and probably crushed by now. *I knew I was forgetting something.* Lol!

...You can get a new one from ATP for $95.

...Or you can find a used one for even less.

...Or you can upgrade your turbo, with no need for the v-band module.

 

[coyfish]

Is that a bend in the lip by your pinky???? Or is it just an odd angle?

$220 is my offer.

 

[realestvin7]

Is that a bend in the lip by your pinky???? Or is it just an odd angle?

$220 is my offer.

No bend, here.

Also included, is a 5-wire wide-band O2 sensor. The wires are cut, but there's plenty of length to work with.

 

[coyfish]

Looks good. Thanks for clearing that up. Offer still stands so let me know. I would offer more but I would have to buy the V band.

 

[markspd6]

Yep that V band piece is like $95.. So that makes this a tough deal..

 

[realestvin7]

It is OBO, guys.

 

[alca0811]

what size is it?? 2.5 or 3 inch??

 

[realestvin7]

what size is it?? 2.5 or 3 inch??

3". No dinky 2.5" pipe, here.

 

[markspd6]

I own this piece myself.. I can tell you ATP is quality product.. And this is an easy 3" pipe.. Heavy weight with a flex shaft.. So the part is good but, you'll need the v band for sure.. I'd say $200 plus shipping is a fair price.. But, it's his call..

 

[realestvin7]

$250 + shipping and it's gone.

 

[markspd6]

lets see.. $250+ $95+ shipping $40(ups, just raised their rates) so thats $385 total for a part thats $439 brand new shipped.?? (squinty)

and im sure ken will knock a couple bucks off his price at PG.. so the savings is $50 at best maybe?? id do the math again and take the $220 deal.. im suprised he wants to pay that much?? considering the risks involved.. i know youll say im a dick.. but, im just trying to point out the obvious problems with your deal..

 

[Lil_vicious559]

lets see.. $250+ $95+ shipping $40(ups, just raised their rates) so thats $385 total for a part thats $439 brand new shipped.?? (squinty)

and im sure ken will knock a couple bucks off his price at PG.. so the savings is $50 at best maybe?? id do the math again and take the $220 deal.. im suprised he wants to pay that much?? considering the risks involved.. i know youll say im a dick.. but, im just trying to point out the obvious problems with your deal..

For that price. I'd rather just ditch out the extra 50 and get it brand new. And ken does free shipping anyways.

 

[realestvin7]

lets see.. $250+ $95+ shipping $40(ups, just raised their rates) so thats $385 total for a part thats $439 brand new shipped.?? (squinty)

and im sure ken will knock a couple bucks off his price at PG.. so the savings is $50 at best maybe?? id do the math again and take the $220 deal.. im suprised he wants to pay that much?? considering the risks involved.. i know youll say im a dick.. but, im just trying to point out the obvious problems with your deal..

I wasn't going to think you were a dick till you came in here and started tearing my ad apart. ATP charges $30-35 to ship here, just north of Dallas. It wasn't bought form Protege Garage, so shipping wasn't free. Maybe whomever buys this can use PG and get free shipping for the v-band module. Also, used stainless exhaust doesn't lose it's value as much, due to the fact that it takes much longer to corrode and rust out. Ask me how I know, since I custom fabricated stainless steel for 2 years of my life. I don't need to sell it that badly. If I can't get what I think it's worth, I can always just cut it up and fab it to fit my KA-T S14. I just wanted someone a chance to benefit before I did so.

By my calculations, someone would be saving about $80. not including a new 3" gasket. That's another $8 you'd have to spend.

Here's a screen shot from UPS showing it would be less than $15 to ship from Denton, TX to Orlando, FL via their ground service.

Here's one from FedEx. Also from Denton, TX to Orlando, FL.

Stop attacking my free business enterprise, Obama.

 

[realestvin7]

All I need is somebody with highly modded MS6 that doesn't need the v-band module. Then, they'd be getting a sweet deal.

 

[coyfish]

Parts lose their value when they are used period. Especially coming off a wrecked car. Its probably fine but its still a risk. All aftermarket downpipes are 3 inches and stainless steel (ghl, cobb, cpe, corksport, even ebay).

Do you include the ATP cel trick kit ???

 

[markspd6]

Ups doesn't charge by weight anymore it's weight X size... so your shipping rate is for a small box not a larger container that would be needed.. I can go in and check but there's no way you can ship a downpipe anywhere for $15.

and since that's your offer I'd suggest somene catch you on it and Take the $15 shipping deal you're offering.. So it's $265 shipped guaranteed??

 

[realestvin7]

Do you include the ATP cel trick kit ???

No, I don't have it anymore.

I can live with $265 shipped, just to get it out of here. I'm too tempted to cut it up for my Nissan. Lol!

 

[realestvin7]

Ups doesn't charge by weight anymore it's weight X size... so your shipping rate is for a small box not a larger container that would be needed.. I can go in and check but there's no way you can ship a downpipe anywhere for $15.

and since that's your offer I'd suggest somene catch you on it and Take the $15 shipping deal you're offering.. So it's $265 shipped guaranteed??

Yeah. I put in the dimensions as 42"L x 12"T x 7" wide box @ 16 lbs. Is that not enough weight, do you think? Also, that's with it insured @ $250.