Another BC install thread

[thanotosq]

(naughty)..and i did ask nicely...and it was all worth it...(naughty)

 

[GhostMercury]

well i might have found my coilover suspension then. Is any modification needed to be able to use the camber plates/install the BC's. Like drilling/cutting etc.

 

[thanotosq]

well i might have found my coilover suspension then. Is any modification needed to be able to use the camber plates/install the BC's. Like drilling/cutting etc.

yup, but it is so simple a cave man could do it(eyeballs)

in all seriousness... all you need is a 3" hole saw and a drill...preferably one with charged batteries (nuts)...yeah i forgot to charge them the night before... Anyway, it really only took about 3 minutes to cut the hole.

 

[GhostMercury]

but cutting the hole is the horrible part. I dont want to hurt my baby

 

[IMPORTIMAGE]

dont think of it as hurting...think of it as improving upon ones handling...or a facelift haha

 

[GhostMercury]

yea I know. I need to talk with your subaru buddies to come over and help me lol. But of course there is our new friendship because you have all the parts I need lol. So my wallet is technically yours now ahaha

 

[udontknowjack]

did u get alignment done?? whats ur front camber like? my question is really how much -camber u can get in the front?? and picture on the camber plates?? thanx

 

[thanotosq]

did u get alignment done?? whats ur front camber like? my question is really how much -camber u can get in the front?? and picture on the camber plates?? thanx

yes, i got an alignment, but i think that i want to run a little less camber in the back...2.5 in the back

the front is about 1.5, but that is pretty much as little as you can get out of it...i'm guess that the max camber is...(dunno)...a lot i am sure...

 

[udontknowjack]

yes, i got an alignment, but i think that i want to run a little less camber in the back...2.5 in the back

the front is about 1.5, but that is pretty much as little as you can get out of it...i'm guess that the max camber is...(dunno)...a lot i am sure...

damn...thats way too much in the back...u dont want more that -1.5 in the back...its gonna be too hard to get u rear to swing out imo....and the front when u mean as little...meaning theres alot more - camber to go?? im hoping to get -2.5 in the front....-1 in the rear.....my bc coilover is coming on monday....wish me luck...(thumb)

 

[thanotosq]

damn...thats way too much in the back...u dont want more that -1.5 in the back...its gonna be too hard to get u rear to swing out imo....and the front when u mean as little...meaning theres alot more - camber to go?? im hoping to get -2.5 in the front....-1 in the rear.....my bc coilover is coming on monday....wish me luck...(thumb)

my thoughts exactly, but when i installed the camber arms....well, i really did extend them out because i wanted to see how much i was going to get out of the rear....

you should be able to get plenty of camber in the front...but then again i have never auto-x'd (which i'm figuring is why you want the camber) so i really dont have that kind of mind set...(bang)

 

[udontknowjack]

did u get corner weight too?

 

[thanotosq]

did u get corner weight too?

i wish...but no

 

[udontknowjack]

i wish...but no

so u just got alignment without corner weight?

im glad i have a pro national level race aligment shop just around the corner of my house....=)