Corksport FMIC GB

[philly_81]

Not sure about the stock Airbox, but the current set up uses the stock BPV. You can get any BOV flange put on, you just have to ask Corksport.
All so see this thread.


http://www.mazdas247.com/forum/showthread.php?t=120638&page=5

 

[210_ZOOM]

does this fmic run on stock intake? would the hks ssqv work on it??

I asked corksport that question already. Their reply was they can weld any flange needed on it prior 2 shipping out for a small fee. Can't remember exactly. Very reasonable though.

 

[CorkSport]

BOV flanges

$30 plus the cost of the flange for the BOV and we can put any type you want on the piping.

Thanks
Derrick

 

[210_ZOOM]

Corksport FMIC GB

1. 210_zoom
2. mp5_tunerx
3. 4drboost
4. orangeade
5. Lodivigo
6. Greensleeper
7. Daonly1around (if it will work with stock radiator)
8.philly_81
9.cbr600rx7
10. Arok22 (I went CS and checked it out. I want it!)
11.BIGANT
12.FuglyMonkie
13.
14.
15.
16.
17.
18.
19.
20.

 

[funkyman]

599 shipped i`m in with 20 of them,thats alot of intercoolers to be honest.

 

[MSP 2731]

599 shipped i`m in with 20 of them,thats alot of intercoolers to be honest.

What is this guy talking about?

Thats a little to steep for a small intercooler bro 399 would be ideal for a piece of small aluminum and a couple of pipes and clamps.What is the world coming to.

It doesn't look small to me bro and if you can find a new FMIC kit from a reputable and knowledgeable company such as Corksport for $399 then you need to go ahead and share this info with the rest of us. You could possibly make a custom set up yourself for that price or get one from a no name company off of ebay but I have not seen a FMIC kit for under $749 for the MSP unless it was involving a group buy. And don't you have a MS3? Unless you are trying to find out more info about this kit or are interested in this group buy then you should probably leave this thread alone.

 

[alca0811]

Corksport FMIC GB

1. 210_zoom
2. mp5_tunerx
3. 4drboost
4. orangeade
5. Lodivigo
6. Greensleeper
7. Daonly1around (if it will work with stock radiator)
8.philly_81
9.cbr600rx7
10. Arok22 (I went CS and checked it out. I want it!)
11.BIGANT
12.FuglyMonkie
13. alca0811 (if able to upgrade to larger core; already PMed Corksport)
14.
15.
16.
17.
18.
19.
20.

 

[Lodivigo]

What is this guy talking about?

Lol, I have no clue.

It doesn't look small to me bro and if you can find a new FMIC kit from a reputable and knowledgeable company such as Corksport for $399 then you need to go ahead and share this info with the rest of us. You could possibly make a custom set up yourself for that price or get one from a no name company off of ebay but I have not seen a FMIC kit for under $749 for the MSP unless it was involving a group buy. And don't you have a MS3? Unless you are trying to find out more info about this kit or are interested in this group buy then you should probably leave this thread alone.

+1

 

[funkyman]

Easy tiger

 

[fuglymonkie]

just wondering... does it include shipping?

 

[daonly1around]

so this will already work with the stock BPV?

 

[210_ZOOM]

just wondering... does it include shipping?

I don't know, but ill ask the question.

 

[Wbriggs19061]

when does this end?

 

[210_ZOOM]

when does this end?

I didnt get a Deadline, im gonna shoot from the hip and say this is a 1 time offer.

 

[Lodivigo]

Yes this kit will work with the stock bpv. If you don't want to use the stock bpv you can have them install a flange for the bov of your choice.

 

[daonly1around]

so the bpv will bolt on the "cold" side? and if i purchase an injen cai i will have what i need to hook up the stock BPV minus the hoses? I'm installing a msp turbo on my lx and have everything except for an inter cooler and some type of intake and just trying to make sure i have EVERYTHING when i go to install it in February sometime.

 

[Lodivigo]

??? Not sure what you're asking here. The bpv connects the cold side to the hot side. When you let off the gas the bpv takes the compressed air in the cold pipe and dumps it to the hot pipe just after the turbo. The dumped air makes it's way through the intercooler again, to the cold pipe and then the TB. With this FMIC kit and an Injen CAI you'll have everything you need to make it work (assuming you already have the bpv).

 

[daonly1around]

guess i'm trying to figure out where it actually mounts to, i understand what you are saying from taking air from the cold side to the hot side. just making sure the flange for the stock bpv is included in the price.

 

[Wbriggs19061]

im pretty sure the flange for the stock bpv is included from the looks of the it it is moved but they have an extension piece to make it connect right up

 

[Lodivigo]

^ Yep, what he said. Extension is in blue, BPV is in yellow.