LED Rear bumper reflector light install question (2024 CX-5 Turbo)

[Eortiz787]

Hi All,

I'm installing LED Rear bumper Reflector lights. I need to know if anybody has identified the five wires that are going into the harness for the led rear lights? Any help would be appreciated it thanks

 

[Eortiz787]

Can anybody elaborate?

 

[Candurin]

The pinouts are literally in your photo to the left of the connector.

 

[Eortiz787]

The pinouts are literally in your photo to the left of the connector.

Yes , but the

The pinouts are literally in your photo to the left of the connector.

yes the pinouts are black,red,brown,blue & green ..the ones on the led bumper lights only have 4 wires yellow,green,black & red wanna know which ones match and if I have to connect all or leave one out ?

 

[Candurin]

Send a link to where you purchased the lights.

You likely will not use the green wire in the OEM harness.

If I had to guess (again, a link to your specific lights would help):

Black light fixture to black OEM (ground screw or ground hub would be better).

White wire fixture (usually green but it’s a tail/running light) to red OEM.

Red light fixture (brake) to brown OEM.

Yellow light fixture (turn) to blue OEM.