turbo

Just got a 2003 Mazda Speed Protege. Some problems I need help with. The turbo has alot of shaft play forward and backwards. And it has almost enough play up and down to hit the housing. Bearing is about to blow. The oem garret turbo is 1200$. And a oem garret Center section replacement is...

Hi Im looking for a custom intake manifold for my 2003 mp5, I alreday have the jspec one so Im looking for something better for my turbo setup,thanks

The car triggers the P2262 code when it goes to low RPM, (<1500) where the boost isn't working anyway as far as i know. Has any1 had a similar issue before, and if so, how did you fix it :) ... Edit, turns out it was indeed a faulty map sensor, i've been it for 200km now with stops and slow...

Hi, i wonder if is possible to install a blow off valve in this diesel engine. Btw im new in this forum, i'm from south america, i will appreciate any suggestion! Thx <a href="https://ibb.co/FY6gkWY"><img src="https://i.ibb.co/09qhpX9/20190408-171111.jpg" alt="20190408-171111" border="0"></a>

Hey all! So recently the my engine started knocking so I'm planning on putting a new engine in (oem) and putting a turbo on it. If the damage in the current engine isn't that bad I'll probably end up re-building the motor if possible and boosting at a later date (unlikely). Anyways, I'm on a bit...

So, Ive seen a lot of chatter about the new 2.5T engine and how nice the added power makes the car. I do feel like the base engine lags before you actually get a slight power jolt. I however havent seem much talk about the new 2019 G-vectoring system upgrade. Any thoughts or inputs about the new...

Watched the SavageGeese review last night, and one comment struck me as very worrisome. It was at the very end. He mentioned that once in awhile he'd punch it and not get the performance he was expecting, in other words reduced or no boost. He stated that's why he's not crazy about turbos in...

Howdy I have a 07 mazda3 hatch with a '11 fusion motor ready to go in sometime in Dec. The plan is to boost it by spring next year, and I have most things figured out but I am still working on some things. One of those major things is the ECU setup. I would prefer to run a piggyback or full...

Tires have less then 200 miles on them when the engine died. Tires $650 literally only 4 days of use on them Cat $100 less then 6 months old Alternator $75 less then a year old Turbo $500 wastegate is only 6 months old Radiator $50 Brand new for non-turbo models. Bought the wrong one on ebay...

Hey Everyone! It's been a long time since I've posted on here, but over the last year (almost exactly 1 year) I've been working on and off turboing my M2. I want to preface this in saying that I don't have any formal automotive training (never even took an automotive class in High school) but...

Hello all, for the very scarce amount of members still roaming around. I decided to sell MSP 935 after it's back to stock equipment in favor of this cleaner/ less abused car. I'm attempting to get this car running/driving by June as I've plans to meet with Mr.323, Philip! (wiggle) Couldn't be...

Hey everyone I'll be doing a bit of fall cleaning at the shop. Majority of the pricing listed will include shipping and 13% sales tax. Parts are being shipped from Toronto, ON,. Pricing listed is in USD. We are always accepting new parts requests. Just recently started supplying new parts...

ive got a little project car i dont drive and im kinda newbie when it comes to turbos but I want to install a turbo on my Mazda but i cant find any forged piston heads that will fit any part websites will help also is there other ways of lowering compression ratio?

Stupid shop broke the nipple off. Then tried to melt it to stick it back on. Is there a cheaper option than the oem part? The same shop in the same trip also broke a gas line behind the intercooler and rigged a patch the broke 2 days later leaking all of my just filled tank while my 2 kids (both...

Hey everyone. I've been around for quite a while. Many of you know my Championship White protege LX and it's many different setups and builds... So here we are with Mazdaspeed #935. Picked it up for pretty damn cheap, drove to Ohio to grab it and bring it home. It's been sitting for a little...

First ever post not sure how to add pictures either but I have a 2003 MSP that I bought from a kid with a bad motor 137k on the dash replaced the motor not knowing it was a bad motor that I bought of a guy on facebook for 300 dollars and that one started knocking within in two days . great...

Im about to purchase the entire turbo set up from an msp from a fellow mazda enthusiast. I was hoping for some help on a few things. Firstly, could someone give me a list of all the parts ill need from the msp to make this work? Secondly, how simple will this transition be? I have read a bit...

Hi Everyone, I'm parting out my 2003 Mazdaspeed Protege with 137xxx miles on it. Almost everything is for sale. Buyer is responsible for shipping costs from Toronto, ON, Canada. On Most items I will provide a price including shipping, taxes and unit price. Please specify if you require an...

Hello all.. I have a 2003 yellow MSP that Im trying to part out or if you want to buy the whole car. Here in Massachussetts the body tend to rot out. Vehicle has 126K on it. Has a recent rebuilt of the engine. My idea was to have a daily driving car but make it a highway threat. The engine...

I am parting out my 03 MSP spicy orange. Everything must go the unibody snapped. all stock vehicle parts are for sale, seats, doors, mirrors, lights, etc, etc.... mention what you are looking for and I will get in contact. all the upgrades and extras are also available, engine is solid as well...